



ALLEN & HEATH DX164-W
PRICE ON ENQUIRY
Allen & Heath DX164-W 16 in / 4 out 96 kHz wall-mount expander for dLive, Avantis, SQ, Qu and AHM, with redundant or cascade DX link. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway.
General
| Type | 16 in / 4 out 96 kHz wall-mount expander |
| Compatible with | dLive, Avantis, SQ / SQ+, Qu (96 kHz models), AHM audio matrix processors |
| Mounting | In-wall or on-wall with reversible mounting frame; horizontal or vertical, flush or straight; 12 x 12 inch electrical box or floor pocket (dip trap) with custom brackets |
| Sample rate | 96 kHz |
| Distance from mixer | Up to 100 m, single Cat5e cable |
| Preamp control | From the mixing system; all mic preamps scene recallable |
| Firmware | Updated or downgraded automatically by the mixing system |
Inputs
| Mic/line XLR inputs | 16, balanced XLR, +48 V phantom power |
| Phantom power indication | LED per input socket |
| Mic/line preamp | Fully recallable |
| Input sensitivity | -60 to +15 dBu |
| Analogue gain | +5 to +60 dB, 1 dB steps |
| Pad | -20 dB active pad |
| Maximum input level | +30 dBu (pad in) |
| Input impedance | >4 kΩ (pad out), >10 kΩ (pad in) |
| Mic EIN | -127 dB with 150 Ω source |
Outputs
| Analogue XLR outputs | 4, balanced, relay protected |
| Output impedance | <75 Ω |
| Nominal output | +4 dBu = 0 dB meter reading |
| Maximum output level | +22 dBu |
| Residual output noise | -92 dBu (muted, 20 Hz - 20 kHz); -90 dBu (muted, 20 Hz - 40 kHz) |
DX connection
| DX A | Locking RJ45 port, to the mixer or upstream DX expander |
| DX B | Locking RJ45 port, for redundant connection or daisy-chaining to a downstream DX expander |
| Mode switch | Redundant or cascade |
| Redundant mode | Full redundant connection to a dLive S Class MixRack or Surface |
| Cascade mode | Series connection of two units with a single cable to the mixing system; up to 2 DX expanders on each DX port |
Power
| Mains voltage operating range | 100-240 V AC, 50/60 Hz |
| Mains power consumption | 35 W max |
| Mains connection | Earthed 3-pin IEC inlet, or optional screw terminal with cable gland |
| DC input | 12 V DC, 3 A max; primary or redundant supply |
Physical
| Chassis | Robust steel |
| Operating temperature range | 0 °C to 35 °C (32 °F to 95 °F) |
| Dimensions (W x D x H) | 210 x 87 x 210 mm (8.25 x 3.5 x 8.25 in) |
| Weight | 3.2 kg (7 lbs) |
| Boxed (W x D x H) | 375 x 415 x 250 mm (14.75 x 16.33 x 9.9 in), 5.65 kg (12.5 lbs) |
Product overview
The Allen & Heath DX164-W is a 16 in / 4 out, 96 kHz wall-mountable expander that adds remote I/O to dLive, Avantis, SQ and Qu mixers and to AHM audio matrix processors.
DX164-W puts 16 mic/line inputs and 4 line outputs into a wall box format for fixed installations. It connects to the mixer, or to an upstream DX expander, with a single Cat5e cable of up to 100 m on a locking RJ45 DX port, and that one cable carries both the digital audio and the control signals. Gain, pad and +48 V phantom power are controlled from the mixing system, and all mic preamps are scene recallable.
The reversible mounting frame allows in-wall or on-wall mounting, and the robust steel chassis can be fitted horizontally or vertically, flush or straight. With custom brackets the unit fits a standard 12 x 12 inch electrical box, or a floor pocket (dip trap) for stage use. Every XLR input has its own phantom power LED, and the 4 balanced XLR line outputs are relay protected.
Two locking RJ45 DX ports and a mechanical Mode switch set how the unit joins the system. In redundant mode, DX A and DX B give a full redundant, dual-cable connection to a dLive S Class MixRack or Surface. In cascade mode, DX B daisy-chains a downstream DX expander, so two units share one cable to the mixer. It is plug-and-play: there is nothing to configure, and the mixing system updates or downgrades the expander firmware automatically.
DX164-W works with dLive (on DX ports, a DX Link card or a DX Hub), Avantis, SQ / SQ+, the 96 kHz Qu models and AHM processors. The built-in 100-240 V power supply runs from an IEC inlet that can be replaced by a gland module with screw terminals for fixed installation, and a 12 V DC input can serve as the primary or the backup supply.
| Mic preamps / XLR line outputs | 16 / 4 |
| Remote I/O expander | 96 kHz |
| From the mixer on one Cat5e cable | 100 m |
| 210 x 87 x 210 mm wall box | 3.2 kg |
Key features
- 16 mic/line preamps on XLR: +5 to +60 dB gain in 1 dB steps and a -20 dB active pad for line level sources
- Individually configured +48 V phantom power with a phantom power LED on every input
- 4 balanced line outputs on XLR, relay protected
- 96 kHz remote I/O for dLive, Avantis, SQ / SQ+, 96 kHz Qu models and AHM processors
- Reversible mounting frame for in-wall or on-wall mounting, horizontally or vertically
- Floor pocket (dip trap) or 12 x 12 inch electrical box mounting with custom brackets
- Up to 100 m from the mixer on a single Cat5e cable
- Two locking RJ45 DX ports, DX A and DX B, with Lnk/Err indicators
- Redundant mode: dual-cable connection to a dLive S Class MixRack or Surface
- Cascade mode: up to 2 DX expanders daisy-chained on each DX port
- Plug-and-play: preamps controlled and recalled by the mixer, firmware matched automatically
- IEC mains inlet (gland module option) plus a 12 V DC input as primary or backup supply
Made for
- Fixed installations that need remote inputs and outputs in a wall box
- Stage inputs in a floor pocket (dip trap)
- dLive systems, on DX ports, a DX Link card or a DX Hub
- Avantis, SQ / SQ+ and 96 kHz Qu mixers
- AHM sound management installations
- Install and commercial audio with several I/O points on one DX Hub
In the box
- DX164-W 16 in / 4 out wall-mount expander
Connections
- 16 x XLR mic/line inputs, balanced, +48 V phantom power, phantom power LED per input
- 4 x XLR line outputs, balanced, relay protected
- DX A: locking RJ45 port to the mixer or upstream DX expander, Lnk/Err LED
- DX B: locking RJ45 port for redundant connection or daisy-chaining, Lnk/Err LED
- Mode switch: redundant or cascade
- AC mains: IEC inlet, 100-240 V AC, 50/60 Hz (replaceable by a gland module with screw terminals)
- DC in: 12 V DC, 3 A max
Allen & Heath DX164-W: frequently asked questions
Which mixers and processors does the DX164-W work with?
dLive, Avantis, SQ / SQ+, the 96 kHz Qu models and AHM audio matrix processors. On dLive it connects to DX ports, a DX Link card or a DX Hub. Avantis, SQ and Qu connect it through their SLink port; AHM-64 has SLink built in, and AHM-32 and AHM-16 take an SLink option card.
How far from the mixer can it be installed?
Up to 100 m, on a single Cat5e cable from the mixer or from an upstream DX expander. The same cable carries the digital audio and the control signals.
What do the redundant and cascade modes do?
A mechanical Mode switch selects the mode. Redundant mode uses DX A and DX B for a full redundant, dual-cable connection to a dLive S Class MixRack or Surface. Cascade mode uses DX B to daisy-chain a downstream DX expander, with up to 2 DX expanders on each DX port.
How can the DX164-W be mounted?
In-wall or on-wall with the reversible mounting frame, horizontally or vertically, flush or straight. With custom brackets it fits a standard 12 x 12 inch electrical box, or a floor pocket for stage use.
How is it powered?
The built-in supply accepts 100-240 V AC, 50/60 Hz (35 W max) through an earthed IEC inlet, which can be replaced by a gland module with screw terminals for fixed installation. A 12 V DC input (3 A max) can be used as the primary supply or as a backup.
Where can I buy the Allen & Heath DX164-W in India?
The Allen & Heath DX164-W is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: In-wall stage I/O for SQ or Avantis
Installers adding permanent stage connections to an SQ or Avantis system.
Connections
| Connect | To |
|---|---|
| Stage microphones and line sources | DX164-W XLR inputs 1-16 |
| DX164-W DX A | Mixer SLink port, one Cat5e cable up to 100 m |
| DX164-W XLR outputs 1-4 | Stage monitors or amplifiers |
Setup
- Fit the DX164-W in-wall or on-wall with its reversible mounting frame.
- Run one Cat5e cable of up to 100 m from DX A to the mixer's SLink port.
- Connect mains to the IEC inlet; the mixer matches the expander firmware automatically.
- Set gain, pad and +48 V for each input from the mixer and patch the 4 outputs.
- Store the settings in a scene: all mic preamps are scene recallable.
Tip: A phantom power LED at every input shows the 48 V status at the wall.
Workflow 2: Redundant link to dLive S Class
dLive venues that need a dual-cable connection to their stage I/O.
Connections
| Connect | To |
|---|---|
| DX164-W DX A | DX port on a dLive S Class MixRack or Surface |
| DX164-W DX B | Second DX port on the same dLive hardware |
| 12 V DC supply | DX164-W DC input, as backup to mains |
Setup
- Set the Mode switch to redundant.
- Connect DX A and DX B to the dLive S Class hardware with two Cat5e cables.
- Power the unit from mains and connect a 12 V DC supply as the backup.
- Patch the 16 inputs and 4 outputs on the dLive system.
Tip: A pair of DX Link card ports can also take one DX expander in redundant mode, using 2 cables.
Workflow 3: Floor pocket inputs on stage
Venues that keep stage connections flush with the floor.
Connections
| Connect | To |
|---|---|
| DX164-W in a floor pocket | Mixer SLink port, dLive DX port, DX Link card or DX Hub |
| Microphones and line sources on stage | 16 XLR inputs |
Setup
- Fit the DX164-W in the floor pocket with custom brackets.
- Connect DX A to the system with one Cat5e cable of up to 100 m.
- Use the IEC inlet, or replace it with the gland module and screw terminals for a fixed mains connection.
- Control and recall the preamps from the mixer.
Tip: With custom brackets the unit can also be fitted in a standard 12 x 12 inch electrical box.
Workflow 4: Two expanders on one cable
Installations that need 32 inputs and 8 outputs from one cable run.
Connections
| Connect | To |
|---|---|
| Mixer SLink port or dLive DX port | First DX164-W DX A |
| First DX164-W DX B | Second DX164-W DX A |
Setup
- Set the Mode switch to cascade.
- Connect the first unit to the mixer and the second unit to its DX B port.
- Power both units and let the mixer match their firmware.
- Patch the 32 inputs and 8 outputs on the mixer.
Tip: Cascade mode allows up to 2 DX expanders on each DX port, for example a DX164-W and a DX168.
Workflow 5: AHM installed sound
Integrators using AHM for sound management, paging and conferencing.
Connections
| Connect | To |
|---|---|
| AHM-64 SLink port (SLink option card on AHM-32 / AHM-16) | DX164-W DX A |
| Room microphones | DX164-W XLR inputs |
| DX164-W XLR outputs | Local amplifiers or recording inputs |
Setup
- Mount the DX164-W in the wall of the room.
- Connect DX A to the AHM SLink port with one Cat5e cable.
- Add the expander inputs and outputs in AHM System Manager and route them.
- Firmware updates to the AHM are reflected in the connected DX expanders.
Tip: SLink connects up to 8 remote expanders to an AHM processor.
Workflow 6: Several rooms on one trunk cable
Install and commercial audio projects with I/O in several places.
Connections
| Connect | To |
|---|---|
| AHM, SQ, Qu or Avantis SLink (or a gigaACE module in Avantis or dLive) | DX Hub, one trunk Cat5e cable |
| DX Hub DX sockets 1-4 | Up to 2 DX164-W expanders per socket |
Setup
- Place the DX Hub near the rooms it serves.
- Connect up to 2 DX164-W expanders to each of its 4 DX sockets.
- Run a single trunk Cat5e cable from the DX Hub to the system.
- Patch the remote inputs and outputs on the mixer or AHM.
Tip: Each DX Hub socket carries 32 x 32 channels of 96 kHz audio.








