







ALLEN & HEATH DX32
PRICE ON ENQUIRY
Allen & Heath DX32 96 kHz modular expander: 4 slots for analogue, AES and PRIME I/O modules, redundant DX link and power, rack or floor use. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway.
General
| Type | 96 kHz modular expander |
| Compatible with | dLive, AHM, Avantis, SQ / SQ+, Qu (96 kHz models) |
| Module slots | 4, for any combination of 8-channel analogue or digital I/O modules, up to 32 channels |
| PRIME | Supports PRIME input and output modules |
| Connection | Up to 32 x 32 channels of uncompressed 96 kHz audio plus control data |
| Distance from mixer | Up to 100 m, Cat5e |
| dLive S Class | Redundant connection over a pair of DX ports (Fast Ethernet) |
| dLive C Class, Avantis, SQ, Qu, AHM | Single cable connection |
| Also works with | DX Link card, DX Hub |
| Firmware | Automatic update at power-up when a mismatch is detected |
| Mounting | Rack ears for a 4U 19-inch rack space; plastic feet for shelf or floor operation |
Inputs (analogue input module)
| Mic/line XLR inputs | Balanced XLR, +48 V phantom power |
| Mic/line preamp | Fully recallable |
| Input sensitivity | -60 to +15 dBu |
| Analogue gain | +5 to +60 dB, 1 dB steps |
| Pad | -20 dB active pad |
| Maximum input level | +30 dBu (pad in) |
| Input impedance | >4 kΩ (pad out), >10 kΩ (pad in) |
| Mic EIN | -127 dB with 150 Ω source |
| Phantom power indication | Per socket, internal or external phantom power sensing, triggered at 24 V |
Digital inputs (AES input module)
| AES3 inputs | 2 ch per XLR, 2.5 Vpp balanced, terminated 110 Ω |
| Sample rate conversion | SRC on each pair, 32 kHz - 192 kHz, with bypass option |
Outputs (analogue output module)
| Analogue XLR outputs | Balanced, relay protected |
| Output impedance | <75 Ω |
| Nominal output | +4 dBu = 0 dB meter reading |
| Maximum output level | +22 dBu |
| Residual output noise | -92 dBu (muted, 20 Hz - 20 kHz); -90 dBu (muted, 20 Hz - 40 kHz) |
Digital outputs (AES output module)
| AES3 outputs | 2 ch per XLR, 2.5 Vpp balanced, terminated 110 Ω |
| Sample rate | 96 kHz, switchable to 48 kHz or 44.1 kHz |
System
| ADC | 24-bit Delta-Sigma |
| DAC | 24-bit Delta-Sigma |
| Latency | +8 samples, DX32 to MixRack or DX32 to Surface (DX hop) |
| System latency | 0.7 ms (MixRack XLR in to XLR out, input to mix); +5 samples, Surface to MixRack (gigaACE hop) |
Power
| Mains voltage operating range | 100-240 V AC, 50/60 Hz |
| Mains power consumption | 300 W max (MPS16 V1 300 W); 250 W max (MPS16 V2 250 W); printed under the AC inlet |
| Power supply | Modular, earthed 3-pin IEC inlet with rocker switch; optional second, hot-swappable redundant supply of the same type |
Physical
| Operating temperature | 0 °C to 35 °C (32 °F to 95 °F) with MPS16 V1 300 W; 0 °C to 40 °C (32 °F to 104 °F) with MPS16 V2 250 W |
| Dimensions (W x D x H) | 433 x 290 x 177 mm; 481.6 mm wide with rack ears |
| Weight | 10.5 kg (23 lbs) |
Product overview
The Allen & Heath DX32 is a 96 kHz modular expander that adds remote I/O to dLive, AHM, Avantis, SQ and Qu systems, with 4 slots for 8-channel analogue or digital I/O modules.
The modular design lets you build your own expander with the I/O you need. Each of the 4 slots holds an 8-channel input or output module, in any combination of analogue and AES digital options, for up to 32 channels. Analogue input modules carry 8 recallable preamps on XLR for balanced or unbalanced microphone and line signals, with gain, pad and 48 V digitally controlled within the preamp; analogue output modules carry 8 balanced, relay-protected line outputs; AES modules carry 4 stereo AES3 inputs with sample rate conversion, or 4 stereo AES3 outputs. DX32 is also PRIME ready, for the next-generation PRIME input and output modules.
One Cat5e cable of up to 100 m connects the DX32 to the mixer and carries up to 32 x 32 channels of uncompressed 96 kHz audio plus control data. A pair of locking RJ45 DX ports gives a redundant, dual-cable connection to a dLive S Class MixRack or Surface; dLive C Class, Avantis, SQ, Qu (96 kHz models) and AHM systems connect with a single cable, and the DX32 also works with DX Link cards and the DX Hub. Firmware is updated automatically at power-up when a mismatch is detected, so there is nothing to configure.
For critical applications the DX32 has redundant connection and power options. The second power supply bay takes a redundant supply of the same type, interchangeable with the one fitted as standard, and the supplies are hot-swappable, so the unit never needs to be powered down. A rocker switch next to each mains inlet isolates that supply.
The analogue input modules use a new preamp design for extra transparency, with an active pad circuit for consistent performance with any source. The DX32 includes rack ears for a 4U 19-inch rack space and plastic feet for shelf or floor operation, so it can be rack-mounted or used on the stage floor.
| Module slots, up to 32 channels | 4 x 8 |
| 96 kHz channels on one Cat5e cable | 32 x 32 |
| Redundant, hot-swappable | Dual PSU |
| From the mixer | 100 m |
Key features
- 4 module slots: any combination of 8-channel analogue or AES digital input and output modules, up to 32 channels
- PRIME ready for the next-generation PRIME input and output modules
- Analogue input modules: 8 recallable preamps on XLR; gain, pad and 48 V digitally controlled; phantom power indicator
- Analogue output modules: 8 balanced, relay-protected XLR line outputs
- AES input modules: 4 stereo AES3 inputs on XLR with SRC (32 - 192 kHz), bypassable per socket
- AES output modules: 4 stereo AES3 outputs on XLR, 96 kHz switchable to 48 or 44.1 kHz
- Up to 32 x 32 channels of uncompressed 96 kHz audio and control on one Cat5e cable, up to 100 m
- Redundant dual-cable connection to a dLive S Class MixRack or Surface
- Single-cable connection to dLive C Class, Avantis, SQ / SQ+, 96 kHz Qu models and AHM; works with DX Link and DX Hub
- Dual redundant, hot-swappable power supply option
- Rack ears for a 4U 19-inch rack space; plastic feet for shelf or stage floor
- Plug-and-play: automatic firmware update at power-up when a mismatch is detected
Made for
- Critical live applications that need redundant connection and power
- dLive systems that need modular remote I/O
- Mixed analogue and AES digital I/O in one expander
- Avantis, SQ / SQ+, 96 kHz Qu and AHM systems
- Rack-mounted, shelf or stage floor operation
In the box
- DX32 modular expander with 4 module slots
- Power supply fitted as standard (second, redundant supply optional)
- Rack ears for a 4U 19-inch rack space
Connections
- 4 module slots, channels 1-32, each for an 8-channel input or output module
- DX A: locking RJ45 port to the mixer
- DX B: locking RJ45 port for the redundant connection
- Power 1 and Power 2 bays: power supply with earthed IEC inlet and rocker switch, 100-240 V AC
- Ready, Power 1 and Power 2 LEDs; Lnk/Act and Err LEDs on each DX port
- Module connectors as fitted: XLR mic/line inputs with phantom power LEDs, XLR line outputs, AES3 inputs on XLR with SRC Bypass LEDs, AES3 outputs on XLR with sample rate LEDs
Allen & Heath DX32: frequently asked questions
Which I/O modules can I fit in the DX32?
Any combination of 8-channel modules in the 4 slots: analogue inputs (8 recallable mic/line preamps on XLR), analogue outputs (8 balanced XLR line outputs), AES inputs (4 stereo AES3 inputs with SRC) and AES outputs (4 stereo AES3 outputs), plus the PRIME input and output modules. Each module is a separate product, so the DX32 is built for the job.
How does the DX32 connect to dLive?
A pair of DX ports gives a redundant, dual-cable connection to a dLive S Class MixRack or Surface, and dLive C Class connects with a single cable. The DX32 also works with DX Link cards and the DX Hub, with one DX32 on each DX Link port in parallel mode.
Can I use it with Avantis, SQ, Qu or AHM?
Yes. Avantis, SQ / SQ+, the 96 kHz Qu models and AHM systems connect with a single Cat5e cable of up to 100 m, which carries up to 32 x 32 channels at 96 kHz and the control data.
What does the redundancy cover?
The connection and the power. Two DX ports allow a dual-cable connection to compatible hardware, and the second power supply bay takes a redundant supply; the supplies are hot-swappable, so the unit never needs to be powered down.
Can it be mounted in a rack?
Yes. It includes rack ears for a 4U 19-inch rack space, and plastic feet for shelf or floor operation.
Where can I buy the Allen & Heath DX32 in India?
The Allen & Heath DX32 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: dLive S Class with redundant link and power
Critical dLive productions that need redundant connection and power.
Connections
| Connect | To |
|---|---|
| DX32 DX A | DX port on a dLive S Class MixRack or Surface |
| DX32 DX B | Second DX port on the same dLive hardware |
| Power 1 and Power 2 supplies | Mains, one IEC inlet per supply |
Setup
- Fit the I/O modules the show needs in the 4 slots.
- Fit the second, redundant power supply in the Power 2 bay.
- Connect DX A and DX B to the dLive S Class hardware with two Cat5e cables.
- Patch the channels on the dLive system; a power supply can be swapped while the unit runs.
Tip: Power supplies are hot-swappable, so you never need to power down.
Workflow 2: Analogue and digital stage rack
Engineers who need mic inputs, line outputs and AES I/O at the stage of an SQ or Avantis system.
Connections
| Connect | To |
|---|---|
| Microphones and line sources | Analogue input modules |
| AES3 sources | AES input module, SRC on each pair |
| Analogue and AES output modules | Amplifiers, monitors and devices with AES3 inputs |
| DX32 DX A | SQ or Avantis SLink port, one Cat5e cable |
Setup
- Choose the modules, for example two analogue input, one analogue output and one AES output module.
- Mount the DX32 in a 4U rack space with its rack ears, or stand it on its feet on the stage floor.
- Connect DX A to the mixer's SLink port with one Cat5e cable of up to 100 m.
- Patch the 32 channels on the mixer and control the preamps from the console.
Tip: Sample rate conversion on the AES inputs can be bypassed for 96 kHz operation.
Workflow 3: PRIME inputs and outputs
Productions that want the PRIME preamp and converter design in the stage rack.
Connections
| Connect | To |
|---|---|
| Microphones | PRIME input modules: DC coupled gain stage, 32-bit / 96 kHz ADC |
| PRIME output modules | Line feeds to amplifiers or powered speakers |
Setup
- Fit PRIME input and PRIME output modules in the slots needed.
- Combine them with standard analogue or AES modules in the other slots if required.
- Connect the DX32 to the mixer and patch the channels.
- Set and recall the PRIME preamps from the mixer.
Tip: PRIME outputs use 32-bit converters and specially selected op amps for ultra-low noise.
Workflow 4: AES digital sources and destinations
Systems that mix analogue I/O with AES3 digital devices.
Connections
| Connect | To |
|---|---|
| Digital sources with AES3 outputs | AES input module, 4 stereo inputs |
| AES output module, 4 stereo outputs | Devices with AES3 inputs |
Setup
- Fit the AES input and AES output modules.
- Keep SRC on for sources from 32 to 192 kHz, or bypass it per socket for 96 kHz operation.
- Choose 96, 48 or 44.1 kHz for the AES outputs.
- Patch the digital channels on the mixer.
Tip: Each AES module gives 4 stereo AES3 connections on XLR: 8 channels per slot.
Workflow 5: AHM installation rack
Integrators who need many inputs and outputs in an AHM equipment room.
Connections
| Connect | To |
|---|---|
| AHM-64 SLink port (SLink option card on AHM-32 / AHM-16) | DX32 DX A |
| DX32 modules | Microphones, line sources and amplifiers |
Setup
- Configure the 4 slots with the input and output modules the project needs.
- Mount the DX32 in a 4U rack space with its rack ears.
- Connect DX A to the AHM SLink port with one Cat5e cable.
- Route the channels in AHM System Manager; firmware stays matched automatically.
Tip: SLink connects up to 8 remote expanders to an AHM processor.
Workflow 6: Several DX32 on DX Link or DX Hub
Large dLive or Avantis systems that need more remote I/O.
Connections
| Connect | To |
|---|---|
| DX Link card in a dLive or Avantis system | One DX32 per DX Link port (parallel mode) |
| DX Hub DX sockets 1-4 | One DX32 per socket |
Setup
- Fit a DX Link card, or place a DX Hub where the I/O is needed.
- Connect one DX32 to each DX Link port or DX Hub socket.
- For redundancy, connect a DX32 to a pair of DX Link ports with 2 cables.
- Patch the channels on the system.
Tip: Each DX Link or DX Hub port carries 32 x 32 channels of 96 kHz audio.








