ART SplitMix4
MRP - Rs. 6,455
ART SplitMix4 passive four channel stereo / mono mixer, splitter and attenuator: 1/4 inch TRS jacks with intelligent switching, no power needed. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Specifications
| Type | Passive four channel stereo / mono mixer / splitter |
| Inputs | 1/4 inch TRS stereo |
| Outputs | 1/4 inch TRS stereo |
| Input impedance | 25 k - 100 kΩ |
| Output impedance | 1 k - 4 kΩ |
| Frequency response | 20 Hz - 20 kHz, ± 1 dB |
| Total harmonic distortion | < 0.005 % at 1 kHz (typical) |
| Channel separation | > 90 dB (typical) |
| Insertion loss | 12 dB (typical, owner's manual) |
| Phase response | < 10 degrees at 20 kHz (owner's manual) |
| Power requirements | Fully passive |
| Dimensions (H x W x D) | 4.7 x 11.7 x 10.4 cm (1.85 x 4.6 x 4.1 inch) |
| Weight | 0.38 kg (0.84 lb) |
Product overview
The ART SplitMix4 is a passive four channel stereo / mono line mixer, splitter and level attenuator with a versatile hybrid design that needs no power.
Split one input to four outputs, mix four inputs to one output, send four stereo sources to their own stereo outputs with independent level controls, or do any combination of these. The fully passive design means there is no active circuitry to add noise or distortion, and no power is required. All connections are 1/4 inch stereo TRS with intelligent switching: plugging into a mix input removes the channel from the splitter bus, and plugging into a splitter output removes the channel from the mix bus. Mono or stereo operation is determined by the cable you connect. Compact and rugged, the SplitMix4 gets signals where they need to go on stage or in the studio.
| Stereo level controls | 4 channels |
| No power supply required | Passive |
| Attenuation and channel separation | > 90 dB |
| Stereo or mono on every jack | 1/4 inch TRS |
Key features
- Four stereo input channels
- Stereo output
- Independent stereo level controls on each channel
- Passive design: no power supply required
- Over 90 dB of attenuation and channel isolation
Nine ways to configure it
ART's application chart shows nine configurations, including a traditional 4-in 1-out mixer, a 1-in 4-out distribution mixer where each output controls a different audio zone, mixed combinations of mixing and splitting, a mix sent to an external processor and split again, and four independent sources to four independent outputs, each with its own level control. The SplitMix4 is designed primarily as a line level device; low impedance microphones, speakers, headphones and high impedance instrument pickups need an additional amplifier.
In the box
- SplitMix4 mixer / splitter
ART SplitMix4: frequently asked questions
Does the SplitMix4 need power?
No. It is fully passive and needs no power supply.
Can it work in mono and stereo?
Yes. All jacks are 1/4 inch stereo TRS; mono or stereo operation is set by the cables you connect.
Where can I buy the ART SplitMix4 in India?
The ART SplitMix4 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: One source to four zones
Small installations distributing one line source to several powered speakers.
Connections
| Connect | To |
|---|---|
| Line source | Splitter input |
| Splitter outputs 1 to 4 | Powered speakers or amplifiers of four areas |
Setup
- Connect the source to the splitter input.
- Set each zone's level with its channel control.
Tip: ART's application chart shows this as the 1-in 4-out distribution mixer.
Workflow 2: Four keyboards into one stereo input
Keyboard players and studios short of inputs.
Connections
| Connect | To |
|---|---|
| Four stereo keyboards | Mixer inputs 1 to 4 |
| Mixer output | Mixer, HiFi system, computer or instrument amplifier |
Setup
- Connect each keyboard with stereo TRS cables (or mono cables for mono sources).
- Balance them with the four level controls.
Tip: Being passive, the SplitMix4 adds no noise or distortion and needs no power.
