DPA 2006 Twin Diaphragm Omnidirectional Microphone
PRICE - Rs. 1,48,400
DPA 2006 twin diaphragm omni pencil microphone: distinctive, well-balanced sound, low noise and modular preamps; 2006A accurate or 2006C compact. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
2006A: acoustics
| Directional pattern | Omnidirectional |
| Principle of operation | Pressure |
| Cartridge type | Pre-polarised condenser, Twin Diaphragm Capsule |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±2 dB | 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz | 40 mV/Pa; -28 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 | Typ. 28 dB (max. 30 dB) |
| Distortion, THD < 1 % | 127 dB SPL RMS, 130 dB SPL peak |
| Dynamic range | Typ. 114 dB |
| Max. SPL, THD 10 % | 146 dB SPL peak |
| Switchable attenuator | 0 dB / -20 dB |
| Sensitivity selection tolerance (at 1 kHz) | ±1.5 dB |
Electrical
| Rated output impedance | 200 Ω |
| Cable drive capability | 100 m (328 ft) |
| Output balance principle | Impedance balancing with Active Drive |
| Common mode rejection ratio (CMRR) | > 60 dB |
| Power supply (for full performance) | P48 (phantom power) |
| Current consumption | 2.8 mA |
| Maximum output voltage, RMS | 8 V |
| Connector | XLR-3M. Pin 1: shield, pin 2: signal + phase, pin 3: - phase |
| Polarity | +V at pin 2 for positive sound pressure |
Physical
| Weight | 160 g (5.6 oz) |
| Microphone diameter | 19 mm (0.75 in) |
| Microphone length | 164 mm (6.5 in) |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity | Up to 90 % |
| Colour | Matte black |
2006C
| Capsule | Twin Diaphragm Omni capsule, omnidirectional, pressure, pre-polarised condenser |
| Preamp | MMP-C ultra-compact preamp with Active Drive for impedance balancing |
Versions
| 2006A | 2006A Twin Diaphragm Omni Mic |
| 2006C | 2006C Compact Twin Diaphragm Omni Mic |
Product overview
The DPA 2006 Twin Diaphragm Omnidirectional Microphone is built around DPA's unique Twin Diaphragm Omni capsule, which gives a distinctive, well-balanced sound and bridges the extreme sound quality of DPA pencil microphones and the well-known DPA lavalier microphones.
Two opposite-facing miniature capsules are custom rebuilt inside the microphone in a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise of a larger diaphragm area, for fast impulse response and a large frequency bandwidth, and the capsules are loaded to DPA's supreme preamps for more air and precision.
As with all DPA modular pencil microphones, the Twin Diaphragm Omni capsule combines with any DPA preamp: the MMP-A ultra-transparent, transformerless preamp, the MMP-C ultra-compact preamp with a slightly softer character, or the very small MMP-E (XLR output) and MMP-G (MicroDot output) Modular Active Cables for very slim set-ups; the MMP-G even matches a larger microphone directly to a wireless transmitter. The microphone can be transformed into a new configuration at any time, with no tools needed.
Two versions are offered. The 2006A offers low distortion and totally accurate, faithful sound for the true audiophile. The 2006C Compact Twin Diaphragm Omni Mic gives a subtle character alteration with a bit more body in the low end than the 2006A, and is much easier to position thanks to its smaller size.
| Equivalent noise, typ. (2006A) | 16 dB(A) |
| Max SPL, THD 10 %, peak (2006A) | 146 dB |
| Dynamic range, typ. (2006A) | 114 dB |
| Switchable attenuator (2006A) | 0 / -20 dB |
Key features
- Acoustic authenticity
- Linear throughout a large frequency bandwidth
- Twin-Diaphragm Capsule Technology: fast impulse response, low inherent noise
- Modular flexibility: combine with any DPA pencil preamp, no tools needed
- 2006A: low distortion, totally accurate and faithful sound
- 2006C: compact, a bit more body in the low end, easy to position
Made for
- Acoustic music recording
- Stereo recording with a pair
- Tight positions (2006C)
- Slim and wireless set-ups with modular active cables
In the box
- 1 x 2006 Twin Diaphragm Omni Mic, 2006A or 2006C version
DPA 2006: frequently asked questions
2006A or 2006C: which should I choose?
The 2006A offers low distortion and totally accurate, faithful sound. The 2006C is compact, with a subtle character alteration and a bit more body in the low end, and is much easier to position.
What is a Twin Diaphragm capsule?
Two opposite-facing miniature capsules in a double-diaphragm, one-capsule composition: the advantages of small capsules with the lower inherent noise of a larger diaphragm area.
Can I change the preamp?
Yes. The capsule combines with any DPA pencil preamp, and the configuration can be changed at any time with no tools.
Is a stereo pair available?
Yes. The 2006 is available as a single microphone or as a stereo pair (ST2006A, ST2006C).
How is the 2006A powered?
With P48 phantom power through its XLR-3M connector.
Where can I buy the DPA 2006 in India?
The DPA 2006 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Accurate acoustic recording
Recording engineers who want faithful sound.
Connections
| Connect | To |
|---|---|
| 2006A or 2006C | Microphone stand |
| XLR cable | Preamp or interface input with P48 |
Setup
- Place the microphone at the source.
- Connect and switch on P48.
- Use the -20 dB attenuator for loud sources.
Tip: Linear throughout a large frequency bandwidth.
Workflow 2: Stereo recording
Engineers recording ensembles and spaces in stereo.
Connections
| Connect | To |
|---|---|
| Stereo pair | Stereo bar or two stands |
| Two XLR cables | Two inputs with P48 |
Setup
- Set up the two microphones as a pair.
- Connect both and switch on P48.
- Match the gains.
Tip: The microphone is available as a single mic or a stereo pair.
Workflow 3: Tight positions
Engineers working where space is short.
Connections
| Connect | To |
|---|---|
| 2006C with MMP-C | Compact placement |
| XLR cable | Input with P48 |
Setup
- Choose the compact 2006C.
- Place it where a larger microphone will not fit.
- Connect and set the gain.
Tip: The 2006C is much easier to position thanks to its smaller size.
Workflow 4: Very slim set-up
Users who want the smallest visible profile.
Connections
| Connect | To |
|---|---|
| Twin Diaphragm Omni capsule | MMP-E Modular Active Cable |
| XLR output | Input with P48 |
Setup
- Fit the capsule to the MMP-E active cable.
- Connect the XLR output.
- Set the gain.
Tip: Change the configuration at any time, with no tools.
Workflow 5: Wireless
Productions using wireless transmitters.
Connections
| Connect | To |
|---|---|
| Twin Diaphragm Omni capsule | MMP-G Modular Active Cable |
| MicroDot output | Wireless transmitter |
Setup
- Fit the capsule to the MMP-G.
- Connect the MicroDot output to the transmitter.
- Check the level.
Tip: The MMP-G matches a larger microphone directly to a wireless transmitter.
Workflow 6: Changing the character
Engineers matching the sound to the source.
Connections
| Connect | To |
|---|---|
| Twin Diaphragm Omni capsule | MMP-A or MMP-C preamp |
| XLR cable | Input with P48 |
Setup
- Unscrew the capsule from the preamp.
- Fit the other preamp.
- Reconnect and listen.
Tip: The MMP-C has a slightly softer character than the other pencil preamps.
