DPA 2061 Omni Miniature Lavalier Microphone
PRICE - Rs. 57,756
DPA 2061 omni miniature lavalier: outstanding speech intelligibility, IP57, sweat-repelling, fixed LEMO, TA4F or Mini-Jack, four colours. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Acoustics
| Directional pattern | Omnidirectional |
| Principle of operation | Pressure |
| Cartridge type | Pre-polarised condenser |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±3 dB | 50 Hz - 16 kHz, 3 dB soft boost at 8 - 16 kHz |
| Sensitivity, nominal, ±3 dB at 1 kHz | 6 mV/Pa; -44 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
| Distortion, THD < 0.5 % | 120 dB SPL RMS, 123 dB SPL peak |
| Distortion, THD < 1 % | 125 dB SPL RMS, 128 dB SPL peak |
| Dynamic range | Typ. 102 dB |
| Max. SPL, THD 10 % | 137 dB SPL peak |
Electrical
| Power supply (for full performance) | For wireless systems min. 5 V - max. 10 V |
| Current consumption | Typ. 0.6 mA |
| Rated output impedance | 112 Ω |
| Maximum output voltage, RMS | 1.6 V |
| Connector | 3-pin LEMO, TA4F Mini-XLR or Mini-Jack (fixed, by version) |
| Polarity | +V at output for positive sound pressure |
Physical
| Weight | 10 g (0.35 oz) incl. cable and 3-pin LEMO connector |
| Microphone diameter | 5.5 mm (0.22 in) |
| Microphone length | 9.7 mm (0.38 in) |
| Cable | 1.5 m (4.9 ft), Ø 1.6 mm (0.06 in) |
| Modularity | Fixed cap, fixed connectors |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity | Up to 90 % |
| Protection | IP57 |
| Colours | Black, white, beige, brown |
Versions
| 2061-OL-C-B03 / B10 / B34-Acc | Black, 3-pin LEMO / TA4F Mini-XLR / Mini-Jack, with clip and windscreen |
| 2061-OL-C-W03 / W10 / W34-Acc | White, 3-pin LEMO / TA4F Mini-XLR / Mini-Jack, with clip and windscreen |
| 2061-OL-C-F03 / F10 / F34 | Beige, 3-pin LEMO / TA4F Mini-XLR / Mini-Jack |
| 2061-OL-C-C03 / C10 / C34 | Brown, 3-pin LEMO / TA4F Mini-XLR / Mini-Jack |
Product overview
The DPA 2061 is a professional omnidirectional miniature lavalier microphone that captures voice with clarity and consistency.
Whether in broadcast studios or ENG, theatres, houses of worship, event venues or other content creation, the 2061 excels wherever the voice needs to be amplified or recorded. It picks up natural, lifelike sound, designed to capture the human voice accurately with a high level of fidelity and intelligibility and minimal colouration.
With an accurate omnidirectional pattern it does not need to be aimed directly at the source to achieve quality pick-up, which gives the freedom to capture ideal sound wherever the microphone sits on a person. It stays neutral to placement, so whether it is mounted on the chest, forehead or cheek, it captures a natural voice that is easy to EQ to the desired sound.
A robust mechanical construction, advanced sweat-repelling capabilities and IP57 certification give a long life when exposed to water, dust and make-up. The 2061 comes with fixed 3-pin LEMO, TA4F Mini-XLR or Mini-Jack connectors, in black, white, beige or brown; the black and white versions include an SCM0035 clip and a windscreen for fast, secure mounting.
| Pressure, pre-polarised condenser | Omni |
| Sensitivity, Loud SPL | 6 mV/Pa |
| Max. SPL peak (THD 10 %) | 137 dB |
| Water and dust resistant | IP57 |
Key features
- Outstanding speech intelligibility based on clear, natural DPA sound
- Accurate omnidirectional pattern: no need to aim the microphone at the source
- Neutral to placement on chest, forehead or cheek; easy to EQ
- Robust mechanical construction for long-lasting performance
- Advanced sweat-repelling capabilities and IP57 certification against water, dust and make-up
- Fixed 3-pin LEMO, TA4F Mini-XLR or Mini-Jack connector
- Black, white, beige or brown
- Black and white versions include the SCM0035 clip and a windscreen
Made for
- Broadcast studios and ENG
- Theatres and houses of worship
- Event venues
- Content creation
- Voice amplification and recording, indoors and outdoors
In the box
- Black and white versions (-Acc): 2061 microphone, SCM0035 lavalier microphone clip, windscreen
- Beige and brown versions: 2061 microphone
DPA 2061: frequently asked questions
Where is the 2061 used?
In broadcast studios and ENG, theatres, houses of worship, event venues and content creation: wherever the voice needs to be amplified or recorded, indoors or outdoors.
Does the microphone have to point at the speaker?
No. The 2061 has an accurate omnidirectional pattern and stays neutral to placement, so it captures a natural voice on the chest, forehead or cheek.
What is included?
The black and white versions come with the SCM0035 lavalier microphone clip and a windscreen. The beige and brown versions are supplied as the microphone only.
Which connectors are available?
Fixed 3-pin LEMO, TA4F Mini-XLR or Mini-Jack connectors, for wireless systems with 5 to 10 V supply.
How do I clean the 2061?
Remove any foam windscreen, rinse the microphone in demineralised water and wipe it gently with a damp cloth. No cleaning fluids are needed. Leave it to dry for 72 hours before use.
Where can I buy the DPA 2061 in India?
The DPA 2061 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Broadcast studio presenter
Broadcast crews miking presenters and guests.
Connections
| Connect | To |
|---|---|
| 2061 with SCM0035 clip | Presenter's chest |
| 2061 (TA4F Mini-XLR or 3-pin LEMO) | Wireless bodypack transmitter with the same input |
Setup
- Clip the 2061 on the chest; it does not need to be aimed at the mouth.
- Connect the fixed connector to the transmitter.
- Shape the sound with EQ if needed.
Tip: The 2061 stays neutral to placement.
Workflow 2: ENG and field interviews
Electronic news gathering teams.
Connections
| Connect | To |
|---|---|
| 2061 | Interviewee's clothing |
| 2061 | Wireless transmitter |
Setup
- Fit the windscreen for outdoor work.
- Clip on the microphone.
- Check the level and record.
Tip: IP57 certification protects against water and dust.
Workflow 3: Theatre: forehead or cheek
Theatre sound teams.
Connections
| Connect | To |
|---|---|
| 2061 (beige or brown) | Forehead, hairline or cheek |
| 2061 | Wireless bodypack transmitter |
Setup
- Choose the colour that best matches skin or hair.
- Place the microphone on the forehead or cheek.
- EQ to the desired sound.
Tip: Advanced sweat-repelling capabilities ensure uninterrupted operation.
Workflow 4: House of worship
Worship teams amplifying speech.
Connections
| Connect | To |
|---|---|
| 2061 | Speaker's chest |
| Wireless receiver | Mixer and sound system |
Setup
- Clip the 2061 on the speaker.
- Connect it to the bodypack transmitter.
- Set the gain at the mixer.
Tip: Outstanding speech intelligibility for amplified voice.
Workflow 5: Event venue
Event and conference crews.
Connections
| Connect | To |
|---|---|
| 2061 | Speaker's clothing |
| 2061 | Wireless transmitter |
Setup
- Mount with the SCM0035 clip: 360° rotation, non-slip clamp.
- Route the cable through the clip's cable management.
- Check the level.
Tip: Fast, secure mounting with the included clip on black and white versions.
Workflow 6: Content creation
Creators recording voice to camera.
Connections
| Connect | To |
|---|---|
| 2061 (Mini-Jack) | Wireless transmitter with Mini-Jack input |
Setup
- Clip the microphone on.
- Connect the Mini-Jack version to the transmitter.
- Record and EQ to taste.
Tip: The 2061 picks up natural, lifelike sound with minimal colouration.
