DPA 6066 CORE Subminiature Omni Headset Microphone

Product overview

The DPA 6066 CORE is an omnidirectional subminiature headset microphone whose capsule is just 3 mm (0.12 in) in diameter, yet abundant in clarity, consistency and durability.

CORE by DPA technology, shrunk to fit the 3 mm capsule, minimises distortion: from a whisper to a scream there is increased clarity and openness, so there is no need to compromise on sound to focus on aesthetics. The 6066 has a noise floor of only 26 dB(A) and captures high sound pressure levels without distortion, up to 144 dB SPL peak.

The lightweight, one-size-fits-all headset attaches over the ears for maximum comfort. 3-point ear grips with spring mechanisms grip above, below and behind the ear, the stainless-steel frame is PVD-coated for durability and a matte, unobtrusive look, and a 2-way adjustable boom with an anti-rotate mechanism makes it very easy to fit. A 90° cable management system guides the cable down the wearer's back, out of sight.

The 6066 CORE comes with the MicroLock connector, a dependable, secure locking connector with limitless flexibility, or terminated in 3-pin LEMO, TA4F Mini-XLR or Mini-Jack, in black, brown or beige.

Key features

• 3 mm CORE by DPA capsule: renowned DPA sound in a 60 % smaller capsule
• One-size-fits-all headset that fits securely and comfortably, even during long-term wear
• 2-way adjustable, non-reflective boom (length and height) with a sliding locking system
• Comfortable 3-point gripping system above, below and behind the ear
• 90° cable management guides the cable and minimises cable breaks
• Stainless-steel, PVD-coated frame, microphone and grid: durable and resistant to impact and abrasion
• Grid with a tactile and audible click; tiny grid holes add resilience to water and sweat
• Boom detachable below the ear and movable from the right to the left side; service connector lets boom and cable be replaced independently
• Rugged Ø 1.6 mm cable with an aramid-reinforced inner core

Fit and adjustment

The 130 mm boom extends, shortens and pivots up and down at a fixed point below the ear, so it can be set at the corner of the performer's smile, the optimal placement of a headworn microphone, with no bending. The sliding lock keeps it in position. The headset frame resizes with a simple adjustment mechanism and can be customised on site to suit individual performers. The cable guide slides from side to side, for example out of camera view, and separates the cable from the boom movement for a longer cable life.

Made for

• Performers who need a near-invisible headset
• Theatre and live performance, from a whisper to a scream
• Presenters on camera
• Long-term wear with wireless bodypack transmitters

In the box

• 6066 CORE subminiature omni headset microphone with the chosen colour and termination

DPA 6066 CORE: frequently asked questions

How small is the 6066 capsule?

The capsule is 3 mm (0.12 in) in diameter, 60 % smaller than the DPA 5 mm miniature capsule, with a noise floor of only 26 dB(A), matching the 5 mm DPA miniature capsule.

Will the headset fit everyone?

Yes. It is one-size-fits-all with a simple adjustment mechanism, 3-point ear grips with spring mechanisms, and it can be customised on site for a perfect fit.

Where should the microphone sit?

At the corner of the performer's smile, close to but not touching the face. The 2-way adjustable boom extends and pivots to reach this position without bending.

Can I wear the boom on either side?

Yes. The boom detaches below the ear and can be moved from the right to the left side of the frame.

Which connectors are available?

MicroLock, 3-pin LEMO, TA4F Mini-XLR or Mini-Jack. DPA adapters on the MicroLock version suit the many wireless transmitters available, and a DPA XLR adapter allows wired use with P48 phantom power.

Where can I buy the DPA 6066 CORE in India?

The DPA 6066 CORE is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Theatre: near-invisible headset

Theatre sound teams fitting performers.

Connections

Setup

1. Expand the frame, place it on the head and adjust it to size.
2. Set boom length and height so the capsule sits at the corner of the smile, close to but not touching the face.
3. Lock the boom with the sliding lock.
4. Run the cable through the 90° cable guide down the back to the bodypack.

Tip: Choose the colour that best matches the performer's skin.

Workflow 2: Presenter on camera

Broadcast and event crews.

Connections

Setup

1. Fit the headset with the boom on the side away from the main camera.
2. Slide the cable guide out of the camera view.
3. Check the level.

Tip: The PVD coating gives a matte, non-reflective look on camera.

Workflow 3: Switching the boom side

Anyone fitting the headset for left or right use.

Connections

Setup

1. Detach the boom pole from the ear grip by gently pulling it down.
2. Move the cable to the other side of the cable guide.
3. Reattach the boom on the other side until it clicks, release the sliding lock, turn the boom and lock it again.

Tip: No tools are needed to move the boom from right to left.

Workflow 4: Long performances

Performers wearing the headset for hours.

Connections

Setup

1. Adjust the ear grips so they conform to the head.
2. Check that the headset sits securely when moving.
3. Perform; the spring mechanisms grip gently yet firmly.

Tip: The headset can be customised on site for each performer.

Workflow 5: Wired use with phantom power

Installations and wired stage inputs.

Connections

Setup

1. Connect the MicroLock connector to the DPA XLR adapter.
2. Switch on P48 phantom power at the input.
3. Run the cable; up to 300 m is possible with the XLR adapter.

Tip: The microphone also works from 12 V.

Workflow 6: Service: replacing boom or cable

Technicians maintaining a headset fleet.

Connections

Setup

1. Slide back the plastic cover over the gold-plated service connector.
2. Separate the boom and the cable.
3. Replace the part needed and slide the cover back.

Tip: Boom and cable can be replaced independently.