DPA ST2012 Matched Stereo Pair, 2012 Compact Cardioid Microphones
PRICE - Rs. 2,05,354
DPA ST2012 stereo pair of 2012 compact cardioid pencil microphones: robust close miking of any instrument on the live stage. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is inclusive of all taxes. Contact / WhatsApp +91 89818 07755 / +91 91477 00677 to check if any offers or additional discounts are available. If available, we will gladly share a coupon code that you can apply at checkout for the best price. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Acoustics (each 2012)
| Directional pattern | Cardioid |
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarised condenser |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±2 dB, at 30 cm (11.8 in) | 40 Hz - 20 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz | 8 mV/Pa |
| Equivalent noise level, A-weighted | Typ. 20 dB(A) re. 20 µPa (max. 22 dB(A)) |
| Distortion, THD < 1 % | 148 dB SPL, 151 dB SPL peak |
| Dynamic range | Typ. 131 dB |
| Max. SPL, THD 10 % | 156 dB SPL peak |
Electrical (each 2012)
| Rated output impedance | 60 Ω |
| Cable drive capability | 100 m (328 ft) |
| Output balance principle | Impedance balancing with Active Drive |
| Common mode rejection ratio (CMRR) | > 60 dB |
| Power supply (for full performance) | P48 phantom power |
| Current consumption | 0.7 mA |
| Maximum output voltage, RMS | 8.7 V (21 dBu) |
| Connector | XLR-3M. Pin 1: shield, pin 2: signal + phase, pin 3: - phase |
| Polarity | +V at pin 2 for positive sound pressure |
Physical (each 2012)
| Weight | 83 g (2.9 oz) |
| Microphone diameter | 19 mm (0.75 in) |
| Capsule diameter | 17 mm (0.67 in) |
| Microphone length | 94 mm (3.7 in) |
| Temperature range | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative humidity (RH) | Up to 90 % |
| Colour | Black |
Versions
| ST2012 | Stereo pair, 2 x 2012 Compact Cardioid Microphone |
Product overview
The DPA ST2012 is a stereo pair of 2012 Compact Cardioid Microphones: robust and reliable condenser pencil microphones for close miking on the live stage.
The 2012 is an all-round generalist that guarantees excellent results on any instrument on a live stage. It is extremely flexible, has exceptionally natural and precise sound reproduction and uniform cardioid directionality, and has been designed to withstand rough use on the live stage.
Each microphone handles 148 dB SPL at THD below 1 % and 156 dB SPL peak at THD 10 %, runs on P48 phantom power and has a balanced XLR-3M output with Active Drive that drives cables up to 100 m.
| Stereo pair | 2 x 2012 |
| Sensitivity | 8 mV/Pa |
| Max. SPL peak, THD 10 % | 156 dB |
| Dynamic range, typ. | 131 dB |
Key features
- Two 2012 compact cardioid microphones supplied as a stereo pair
- Durable, reinforced construction designed to withstand rough use on the live stage
- Excellent transient response
- Uniform cardioid directionality
- Outstanding SPL handling: 156 dB SPL peak at THD 10 %
- Natural and precise sound reproduction
Made for
- Close miking instruments on the live stage
- Any instrument: all-round generalist pencil microphones
- Paired set-ups that need two matching microphones
In the box
- 2 x DPA 2012 Compact Cardioid Microphone (stereo pair)
DPA ST2012: frequently asked questions
What is the ST2012?
It is the stereo pair version of the 2012 Compact Cardioid Microphone: two 2012 microphones.
What are the microphones made for?
Close miking on the live stage. The 2012 is an all-round generalist that delivers excellent results on any instrument.
How loud can the sources be?
Each 2012 handles 148 dB SPL at THD below 1 % and 156 dB SPL peak at THD 10 %.
What power do they need?
P48 phantom power through standard XLR-3M connections.
Where can I buy the DPA ST2012 in India?
The DPA ST2012 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Pair on an instrument group
Live engineers miking a section in stereo.
Connections
| Connect | To |
|---|---|
| 2012 pair | Instrument group |
| 2012 pair | Two inputs with P48, panned left and right |
Setup
- Place the two microphones on the group.
- Connect each to its own input.
- Pan and balance.
Tip: Uniform cardioid directionality on both microphones.
Workflow 2: Two instruments, matching sound
Engineers who want the same microphone on two sources.
Connections
| Connect | To |
|---|---|
| 2012 no. 1 | First instrument |
| 2012 no. 2 | Second instrument |
Setup
- Close-mic each instrument.
- Connect both with P48.
- Set matching gains.
Tip: The 2012 shines on many instruments.
Workflow 3: Loud sources
Engineers miking high-SPL instruments.
Connections
| Connect | To |
|---|---|
| 2012 | Loud instrument |
| 2012 | Mixer input |
Setup
- Place the microphone close.
- Connect and power with P48.
- Set the gain for clean peaks.
Tip: 156 dB SPL peak at THD 10 %.
Workflow 4: Fast transients
Engineers miking percussion.
Connections
| Connect | To |
|---|---|
| 2012 | Percussive instrument |
| 2012 | Microphone input |
Setup
- Position the microphone.
- Connect it.
- Check the attack of the sound.
Tip: Excellent transient response.
Workflow 5: Rough touring use
Touring crews.
Connections
| Connect | To |
|---|---|
| 2012 pair | Stage |
| 2012 pair | Stage box |
Setup
- Rig the microphones.
- Connect with balanced XLR cables.
- Pack them away after the show.
Tip: Durable, reinforced construction for rough use on the live stage.
Workflow 6: Long cable runs
Venues with distant mixers.
Connections
| Connect | To |
|---|---|
| 2012 (Active Drive) | Long balanced XLR cable |
| XLR cable | Mixer input with P48 |
Setup
- Connect the microphone to the cable run.
- Switch on P48.
- Set the gain.
Tip: Cable drive capability up to 100 m (328 ft).
