ECLER THIA-2R
MRP - Rs. 1,06,900
ECLER THIA-2R JPEG2000 4K over IP video receiver: 4K 30 Hz 4:4:4, 1-2 frame latency, 100 m on Cat 6, USB KVM, PoE. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Video
| Output | 1 x HDMI Type A female, 2.0b, 18 Gbps |
| Source resolutions (THIA‑2T) | 480i to 1080p; 4K up to 60 Hz |
| Output resolution | 4K up to 30 Hz (4:4:4) |
| Codec | Main stream JPEG2000; secondary stream H.265 |
| Transmission latency | 1‑2 frames |
| Chroma subsampling | 4:4:4, 4:2:2, 4:2:0 |
| Colour depth | 8‑bit (4K 30 Hz 4:4:4); 10 / 12‑bit (4:2:2, 4:2:0) |
| Colour space | RGB, YCbCr (4:4:4 / 4:2:2), YUV (4:2:0) |
| HDCP | 2.2 |
| HDR | HDR10, HDR10+ |
| Video wall | Up to 9 x 9 |
| Scaling | Yes |
| HDMI cable distance | 5 m at 4K 60 Hz; 10 m at 4K 30 Hz; 15 m at 1080p 60 Hz |
Audio
| Audio output | 1 x 3‑pin unbalanced Euroblock |
| Formats | LPCM 2.0/5.1/7.1 and multichannel compressed formats |
| Sample rate | 48, 96, 192 kHz |
| Bit depth | Up to 24‑bit |
| Frequency response | 20 Hz - 20 kHz (±3 dB) |
Control and network
| Control connectors | 1 x RJ‑45, 1 x 3‑pin Euroblock, 2 x 3.5 mm jacks |
| Status indicators | Power LED, link LED |
| Pass‑through connectors | 2 x USB A, 1 x 3‑pin Euroblock, 2 x 3.5 mm jack, 1 x HDMI |
| Pass‑through protocols | USB 2.0, RS‑232, IR, CEC |
| Network | 1 x RJ‑45; jumbo frame, IGMP management |
| Streaming bitrate | 218 Mbps for 4K 30 Hz |
| Transmission distance | 100 m via Ethernet (Cat 6 / 6A / 7) |
Electrical and physical
| Power supply | PoE; external 100‑240 V AC 50/60 Hz to 12 V DC 1 A (UK, US, AU, EU blades) |
| DC connector | DC locking |
| Power consumption | 4 W |
| Operating | 0 °C to 40 °C, 20 - 90 % RH non‑condensing |
| Storage | -20 °C to 60 °C, 20 - 90 % RH non‑condensing |
| Installation | Desktop, THIA‑RK |
| Dimensions (W x H x D) | 204 x 21.5 x 100 mm |
| Weight | 0.496 kg |
| Shipping dimensions (W x H x D) | 255 x 75.5 x 160 mm |
| Shipping weight | 0.96 kg |
| Chassis / colour | Metal, black |
Product overview
The ECLER THIA-2R is a 4K 30 Hz video over IP receiver based on JPEG2000 compression for secure, low-latency distribution of HDMI signals over 1Gb networks, up to 100 m on a single Cat 6 cable.
Working with the THIA-2T, the THIA-2R is designed for easy integration into professional AV networks. JPEG2000 keeps latency to 1-2 frames, main and sub streams allow preview, and the VEO-XCTRL4D controller with THIA-2C firmware adds video walls up to 9 x 9 and advanced EDID management. HDR10 and HDR10+, multichannel audio, USB 2.0 KVM, CEC, RS-232 and IR pass-through, Telnet, SSH and WebGUI control, and PoE make it a compact, complete endpoint.
| 4:4:4 over the network | 4K 30 Hz |
| JPEG2000 latency | 1‑2 frames |
| Over one Cat 6 cable | 100 m |
| Or 12 V DC adapter | PoE |
Key features
- Unicast and multicast video over IP on 1Gb managed networks
- JPEG2000 codec with 1-2 frame latency
- HDMI 18 Gbps 4K 30 Hz 4:4:4 output as specified in HDMI 2.0b; scaling
- HDCP 2.2; HDR10 and HDR10+
- Up to 100 m over Cat 6 or higher cable
- Main and sub stream for video preview
- Video walls up to 9 x 9 and advanced EDID management via the VEO-XCTRL4D with THIA-2C firmware
- LPCM 2.0/5.1/7.1 and multichannel compressed audio formats
- Stereo analogue audio output on Euroblock
- USB 2.0/KVM, CEC, RS-232 and IR pass-through
- Telnet, SSH and WebGUI control; PoE
Compact 4K endpoint
The THIA-2R sends 4K video at up to 30 Hz 4:4:4 across the network with 1-2 frames of latency, with a 218 Mbps average stream. Its two USB 2.0 device ports serve keyboards, mice, flash disks or cameras for KVM.
Rack or desktop
The unit stands on a desk or mounts in the THIA-RK 6U rack frame, which holds up to ten units vertically with the supplied mounting ears and captive screws.
Managed as a system
The VEO-XCTRL4D controller with THIA-2C firmware manages THIA units, adding video walls and EDID management, while each unit has its own web interface.
In the box
- 1 x THIA-2R
- 1 x IR receiver cable (1.5 m)
- 1 x IR blaster cable (1.5 m)
- 2 x 3-pin 3.5 mm Euroblock connectors (green)
- 2 x mounting ears
- 4 x mounting screws
- 1 x PSU 12 V / 1 A
- 1 x First Steps Guide
- 1 x warranty card
Available versions
- THIA-2R (black): reference CTHIA2R
ECLER THIA-2R: frequently asked questions
Which unit does the THIA-2R work with?
It pairs with the THIA-2T; the VEO-XCTRL4D controller with THIA-2C firmware adds video walls and EDID management.
What resolution does it carry?
4K up to 30 Hz 4:4:4 over the network.
Can it be rack mounted?
Yes, in the THIA-RK 6U rack frame, up to ten units.
Does it need a power supply?
Not with a PoE switch; a 12 V / 1 A supply with four regional blades is included.
Where can I buy the ECLER THIA-2R in India?
The ECLER THIA-2R is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Point-to-point 4K link
A source in one room shown on a display in another.
Connections
| Connect | To |
|---|---|
| Source HDMI out | THIA‑2T VIDEO IN |
| THIA‑2T NET (PoE) | Managed PoE switch |
| Switch | THIA‑2R NET (PoE) |
| THIA‑2R VIDEO OUT | Display |
Setup
- Connect both units to the switch with Cat 6 or higher.
- Pair the receiver with the transmitter.
- Connect the local monitor to the transmitter loop out if needed.
- Check the picture.
Tip: PoE switches power both units.
Workflow 2: Multicast signage
One source on many displays in a shop or hotel.
Connections
| Connect | To |
|---|---|
| THIA‑2T | Switch |
| Switch | Several THIA‑2R receivers |
Setup
- Give each unit a unique IP address.
- Use a managed switch with IGMP management and jumbo frames.
- Set all receivers to the transmitter.
- Check each screen.
Tip: Jumbo frames and IGMP management are required.
Workflow 3: Video wall
A wall of displays in a lobby.
Connections
| Connect | To |
|---|---|
| THIA‑2T | Switch |
| VEO‑XCTRL4D (THIA‑2C firmware) | Switch |
| Switch | THIA‑2R receivers |
Setup
- Install the controller with THIA-2C firmware.
- Discover the THIA units.
- Create the wall up to 9 x 9.
- Route the source.
Tip: EDID management also runs through the controller.
Workflow 4: Rack installation
Equipment rooms with many encoders and decoders.
Connections
| Connect | To |
|---|---|
| THIA units | THIA‑RK 6U frame |
Setup
- Fit the ears with the included screws.
- Slide each unit into its slot.
- Tighten the captive screws.
- Cable network and HDMI.
Tip: The THIA-RK holds up to ten units vertically.
Workflow 5: KVM extension
Operating a computer in a server room from a desk.
Connections
| Connect | To |
|---|---|
| Computer USB | THIA‑2T USB HOST |
| Keyboard and mouse | THIA‑2R USB 2.0 ports |
Setup
- Connect HDMI and USB of the computer to the transmitter.
- Connect the display and USB devices to the receiver.
- Pair the units.
- Test control.
Tip: USB 2.0 KVM runs alongside the video.
Workflow 6: Display control
Turning far-end displays on and off.
Connections
| Connect | To |
|---|---|
| Control system RS‑232 | THIA‑2T RS‑232 |
| THIA‑2R RS‑232 | Display |
Setup
- Wire RS-232 at both ends.
- Use CEC where supported.
- Add IR cables for IR-controlled displays.
- Test commands.
Tip: IR runs at 12 V on both units.
