FYNE AUDIO F1-10 Anniversary product guide and data sheet cover
‹
FYNE AUDIO F1-10 Anniversary product guide and data sheet coverFYNE AUDIO F1-10 Anniversary data sheet page 2: The most advanced IsoFlare yetFYNE AUDIO F1-10 Anniversary data sheet page 3: Inside the driverFYNE AUDIO F1-10 Anniversary data sheet page 4: Aluminosilicate glass domeFYNE AUDIO F1-10 Anniversary data sheet page 5: Integrated SuperTraxFYNE AUDIO F1-10 Anniversary data sheet page 6: Thin Ply Carbon DiaphragmFYNE AUDIO F1-10 Anniversary data sheet page 7: BassTrax and the aluminium plinthFYNE AUDIO F1-10 Anniversary data sheet page 8: Uniquely craftedFYNE AUDIO F1-10 Anniversary data sheet page 9: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F1-10 Anniversary

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: F1 SERIES

Fyne Audio F1-10 Anniversary: limited-edition 3-way floorstander, 250 mm IsoFlare with glass dome tweeter, integrated SuperTrax, 26 Hz - 60 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type3-way, downward-firing port with patented BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)26 Hz - 60 kHz
Sensitivity (2.83 V/1 m)94 dB

Power

Recommended amplifier power20 - 280 W RMS
Continuous power handling140 W RMS
Peak power handling560 W

Drivers

IsoFlare point source driver1 × 250 mm, multi-fibre bass / midrange cone, 75 mm aluminosilicate ultra-thin dome compression tweeter, neodymium magnet system
Super tweeter25 mm (1 in) Thin Ply Carbon Diaphragm (TPCD), neodymium magnet system

Crossover

Crossover frequencies750 Hz, 16 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 2nd order high pass (IsoFlare), 3rd order high pass (super tweeter), Deep Cryogenically Treated
High frequency energyAbove 750 Hz, ±3 dB
Presence2.5 - 5.0 kHz, ±3 dB
Super tweeter energy16 - 60 kHz, ±3 dB

Physical

Dimensions (H × W × D)1247 × 405 × 585 mm (49.1 × 15.9 × 23.0 in)
Dimensions includeTerminals and plinth; spikes excluded
Net weight, each58.7 kg (129.4 lb)
Cabinet constructionBirch ply with solid wood trim and extensive internal bracing
TerminalsBi-wire, with earth terminal

Finishes

FinishPiano Gloss Walnut with champagne-gold Anniversary detailing

Product overview

The Fyne Audio F1-10 Anniversary is a hand-built, limited-edition 3-way floorstanding loudspeaker made to celebrate ten years of Fyne Audio, combining the most advanced 250 mm IsoFlare point source driver the company has made, with a 75 mm aluminosilicate glass dome compression tweeter, and the first fully integrated SuperTrax super tweeter.

First conceived in 2016 and launched in 2017, the original F1-10 was Fyne Audio's first flagship and set the engineering principles, look and musical character that came to define the brand. The F1-10 Anniversary keeps the effortless musicality and engaging character of that loudspeaker and adds a decade of technical progress: new driver technology, advanced materials and refinement throughout.

At its heart is an all-new IsoFlare driver. The bass / midrange cone shares a common, time-aligned centre with the compression tweeter, so sound radiates as if from a single point with constant directivity, giving precise imaging even off axis. The tweeter uses a 75 mm aluminosilicate glass dome: exceptionally thin, light and rigid, chemically strengthened by an ion-treatment process, with up to seven times the resonance damping of typical metal domes. Its large diameter lets it work down to a 750 Hz crossover, carrying its speed and clarity into the vocal range, while the multi-fibre paper cone with FyneFlute surround gives a natural midrange.

On top of the cabinet sits the integrated SuperTrax system: a 25 mm Thin Ply Carbon Diaphragm super tweeter firing vertically into a Tractrix precision diffuser, spreading high frequencies through 360 degrees up to 60 kHz. Time aligned to the acoustic centre of the IsoFlare driver, it preserves harmonic structure and reduces phase error at the top of the main driver's range, adding air, space and realism. Below, a twin-cavity reflex cabinet fires downwards onto the patented BassTrax Tractrix diffuser for even, 360-degree bass that is far less critical of room position.

The bi-wired crossover is hand built on fibreboard panels, Deep Cryogenically Treated and fitted with high-grade polypropylene capacitors, non-inductive thick film resistors, PC-OCC internal wiring and gold-plated bi-wire terminals, plus an earth terminal against radio frequency interference. Front-panel Energy and Presence controls and a top-mounted super tweeter level (each ±3 dB) tune the sound to the room. The curved Baltic birch-ply cabinet is finished in piano gloss burr walnut and American walnut veneer with champagne-gold Anniversary detailing, stands on a machined aluminium plinth, and every pair is individually numbered and built in strictly limited numbers at Fyne Audio's factory in Scotland.

Frequency response (-6 dB, typical in room) 26 Hz - 60 kHz
Sensitivity (2.83 V/1 m) 94 dB
Recommended amplifier power (RMS) 20 - 280 W
IsoFlare + integrated SuperTrax 3-way

Key features

  • Limited-edition ten-year Anniversary model, hand built in Scotland and individually numbered
  • Most advanced 250 mm IsoFlare point source driver Fyne Audio has made, with multi-fibre cone and FyneFlute surround
  • 75 mm aluminosilicate glass dome compression tweeter, ion-strengthened, crossing over at 750 Hz
  • First fully integrated SuperTrax: 25 mm Thin Ply Carbon Diaphragm super tweeter with 360-degree Tractrix diffuser, up to 60 kHz
  • Twin-cavity reflex loading with downward-firing port onto the patented BassTrax Tractrix diffuser
  • Hand-built bi-wired crossover, Deep Cryogenically Treated
  • Front-panel Energy and Presence controls and top-mounted super tweeter level, each ±3 dB
  • Gold-plated bi-wire terminals and earth terminal
  • Curved Baltic birch-ply cabinet with piano gloss burr walnut and American walnut veneer, champagne-gold detailing
  • High-mass machined aluminium plinth with M16 spikes adjustable from above
  • Anniversary booklet, signed approval certificate and exclusive accessories

Made for

  • Dedicated high-end stereo listening rooms
  • Collectors of limited-edition loudspeakers
  • Valve and solid-state amplifier systems alike
  • Bi-wired and bi-amplified systems
  • Listeners who want the air and space of a super tweeter built into the speaker

Placement and set-up

  • Unpack and position with the help of an assistant
  • At least 0.5 m from the rear wall and no closer than 1 m to the side walls
  • Toe the cabinets in towards the listening position to focus the image
  • Fit the M16 spikes and locking wheels, level from above with the tool and use the cups (with felt pads if needed) on wooden floors
  • Start Energy, Presence and super tweeter level at the centre, then adjust in small steps
  • Run in for around 200 hours at normal listening levels

In the box

  • F1-10 Anniversary loudspeakers, individually numbered
  • Accessories box: 8 × M16 floor coupling spikes, 8 spike locking wheels, 8 floor protection cups, 8 felt pads for the cups, 1 spike adjustment tool, 4 bi-wire links
  • Anniversary booklet and signed approval certificate
  • Exclusive Anniversary accessories, including limited-edition etched whisky glasses

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Piano Gloss Walnut: burr walnut and American walnut veneer with champagne-gold Anniversary detailing

Fyne Audio F1-10 Anniversary: frequently asked questions

How is the F1-10 Anniversary different from a 2-way F1 floorstander?

It is a 3-way design: the 250 mm IsoFlare driver with its 75 mm aluminosilicate glass dome tweeter is joined by an integrated SuperTrax super tweeter, crossing over at 16 kHz and extending the response to 60 kHz. It also has a third control, the super tweeter level on the top.

What amplifier suits the F1-10 Anniversary?

Fyne Audio recommends 20 - 280 W RMS into its 8 Ω nominal impedance; continuous power handling is 140 W RMS and peak power handling 560 W. With 94 dB sensitivity (2.83 V/1 m) it also works with low-power valve amplifiers, which will simply limit maximum volume in large rooms.

How should I set the super tweeter level?

Start with the top-mounted control in the centre and adjust within its ±3 dB range using recordings you know. Like a subwoofer, the super tweeter should not draw attention to itself; it adds air and space to the sound field, so take your time and avoid setting it too high.

Can it be bi-wired or bi-amped?

Yes. Use the supplied links for single-wire connection (Fyne Audio advises the HF terminals), remove them for bi-wire with two cable sets or a bi-wire cable, or remove them and drive the LF and HF sections from separate amplifiers.

How long does it take to run in?

Fyne Audio recommends around 200 hours of listening at normal levels, with further improvements over a longer period.

Where can I buy the Fyne Audio F1-10 Anniversary in India?

The Fyne Audio F1-10 Anniversary is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Dedicated stereo listening room

Collectors and audiophiles building a reference two-channel room.

Connections

ConnectTo
Integrated or power amplifier left outputLeft F1-10 Anniversary HF terminals (links fitted)
Amplifier right outputRight F1-10 Anniversary HF terminals (links fitted)
Amplifier ground terminalEarth terminal (optional)

Setup

  1. With an assistant, unpack each speaker, fit the M16 spikes and locking wheels and level it from above with the adjustment tool.
  2. Place the speakers at least 0.5 m from the rear wall and 1 m from the side walls, toed in towards the listening seat.
  3. With the amplifier switched off, connect to the HF terminals with the bi-wire links fitted.
  4. Set Energy, Presence and the super tweeter level to the centre, then fine-tune with familiar recordings.

Tip: Use the cups, with their felt pads if needed, under the spikes on wooden floors.

Workflow 2: Bi-wired system

Listeners getting the most from a single high-quality amplifier.

Connections

ConnectTo
Amplifier left outputLeft speaker HF and LF terminals (two cable runs or a bi-wire cable)
Amplifier right outputRight speaker HF and LF terminals

Setup

  1. Switch the amplifier off and remove the bi-wire links.
  2. Run two sets of cable, or a dedicated bi-wire cable, to the HF and LF terminals.
  3. Terminate with good 4 mm banana plugs or spades.
  4. Check polarity at every terminal before switching on.

Tip: Fyne Audio states that bi-wire mode gives the best sound quality.

Workflow 3: Bi-amplified reference system

Audiophiles with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
PreamplifierLF and HF power amplifiers
LF power amplifierLF terminals of both speakers
HF power amplifierHF terminals of both speakers

Setup

  1. Remove the bi-wire links: they must not be fitted when bi-amping.
  2. Use one stereo amplifier for the LF sections and the other for the HF sections, or four monoblocks.
  3. Match the amplifier gains.
  4. Run the earth terminal to the amplifier ground with a screened cable if radio interference is present.

Tip: Leaving the links in place while bi-amping can damage the amplifiers.

Workflow 4: Valve amplifier system

Owners of single-ended triode and other low-power valve amplifiers.

Connections

ConnectTo
Valve amplifier 8 Ω outputsF1-10 Anniversary terminals (links fitted)

Setup

  1. Connect with the links fitted.
  2. Rely on the 94 dB (2.83 V/1 m) sensitivity to get good levels from modest power.
  3. Keep volume within the amplifier's limits in large rooms.
  4. Adjust Presence for vocal clarity and image depth.

Tip: Amplifier powers below the recommended minimum will not harm the speakers; they limit maximum volume and dynamic range.

Workflow 5: Setting the super tweeter

Every owner, after running in.

Connections

ConnectTo
Top-mounted level controlIntegrated SuperTrax super tweeter

Setup

  1. After around 200 hours of running in, start with the super tweeter level in the centre position.
  2. Play well-recorded music you know, ideally with acoustic instruments and cymbals.
  3. Move the level in small steps within its ±3 dB range, listening for air and space rather than brightness.
  4. Set both speakers identically.

Tip: Like a subwoofer, the super tweeter should never draw attention to itself.

Workflow 6: Home cinema front pair in a dedicated room

Cinema rooms where films and music share one high-end system.

Connections

ConnectTo
TV or projector source with HDMI eARCAV processor or receiver
Front left / right outputs (via power amplifier)F1-10 Anniversary pair

Setup

  1. Place the pair either side of the screen with the stereo wall distances.
  2. Drive them from the processor's front outputs through a stereo power amplifier.
  3. Run the processor's speaker set-up for levels and distances.
  4. Use Energy to balance the treble against the room's furnishings.

Tip: BassTrax spreads bass evenly, helping the front pair blend with the room.

Request a Quote

FYNE AUDIO F1-10 Anniversary

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›