FYNE AUDIO F1-8S product guide and data sheet cover
‹
FYNE AUDIO F1-8S product guide and data sheet coverFYNE AUDIO F1-8S data sheet page 2: IsoFlare point source driverFYNE AUDIO F1-8S data sheet page 3: BassTrax and the aluminium plinthFYNE AUDIO F1-8S data sheet page 4: Tune the treble to your roomFYNE AUDIO F1-8S data sheet page 5: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F1-8S

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: F1 SERIES

Fyne Audio F1-8S: F1 Series 2-way floorstander with 8-inch IsoFlare driver, BassTrax diffuser, 30 Hz - 34 kHz, 91 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with patented BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)30 Hz - 34 kHz
Sensitivity (2.83 V/1 m)91 dB

Power

Recommended amplifier power20 - 200 W RMS
Continuous power handling100 W RMS
Peak power handling400 W

Drivers

Drive unit complement1 × 200 mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, 25 mm magnesium alloy dome compression tweeter, neodymium magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Deep Cryogenically Treated
System adjustmentsHigh frequency energy (1.8 kHz - 34 kHz) ±3 dB; Presence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)1086 × 335 × 445 mm (42.8 × 13.2 × 17.5 in)
Dimensions includeTerminals and plinth; spikes excluded
Net weight, each30.0 kg (66.0 lb)
Cabinet constructionBirch ply with solid wood trim and extensive internal bracing
TerminalsBi-wire, with earth terminal
S-Trax position (from cabinet front edge)69 mm (2.7 in)
SuperTrax position (from cabinet front edge)45 mm (1.8 in)

Finishes

FinishPiano Gloss Walnut

Product overview

The Fyne Audio F1-8S is a 2-way floorstanding loudspeaker from the flagship F1 Series, built around a 200 mm (8-inch) IsoFlare point source driver with a 25 mm magnesium alloy dome compression tweeter at its centre, a twin cavity BassTrax ported cabinet and a machined aluminium plinth.

The F1-8S distils Fyne Audio's 8-inch IsoFlare driver and a bespoke crossover into the most luxurious cabinet of the F1 Series, made for the smaller listening room. Combined with the twin cavity BassTrax ported cabinet, it produces an enhanced bass reaching down to 30 Hz, and the 25 mm magnesium dome compression tweeter at the heart of the IsoFlare driver gives a seamless, time-aligned treble response to over 34 kHz.

IsoFlare is Fyne Audio's point source system: the bass / midrange cone shares a common centre with the high frequency unit, so sound radiates from a single point with constant directivity. The result is a spherical, time-aligned wavefront that preserves the harmonic structure of instruments and voices and keeps the stereo image precise even off axis. The 25 mm magnesium compression tweeter uses a vented neodymium magnet system and crosses over at 1.8 kHz; a magnesium dome was chosen as optimal for this size of tweeter. A multi-fibre paper cone with FyneFlute surround gives a natural midrange and clean transients, and the whole driver sits in a rigid cast aluminium chassis coupled to the internal bracing through damping material.

Bass is loaded by a twin cavity reflex system with a port firing downwards onto the patented BassTrax Tractrix diffuser in the plinth. The loading broadens the tuning frequency to reduce cone excursion and blocks standing waves from the main internal port, while the Tractrix profile turns the port output into an expanding 360-degree wavefront. Bass integrates evenly into the room and the F1-8S is far less critical of positioning than a conventional design.

The no-compromise crossover is computer optimised, fine tuned by critical listening and Deep Cryogenically Treated to relax stresses in components and solder joints. The crossover is hard wired on fibreboard panels to minimise vibration and uses silver-plated, high-purity OFC copper internal wiring. Bi-wire terminals allow single-wire, bi-wire or bi-amp connection, a fifth earth terminal grounds the driver chassis against radio frequency interference, and front-panel Energy and Presence controls (each ±3 dB) tune the treble to the room. With its high sensitivity of 91 dB (2.83 V/1 m), the F1-8S suits amplifiers from low-power single-ended triode valve designs to the most powerful solid-state models.

The cabinet is pressed high-density birch plywood with solid wood trim and extensive internal bracing, finished in lacquered Piano Gloss Walnut with burr walnut inlay. Designed, hand crafted, hand finished and tested at Fyne Audio's own facility in Scotland, the F1-8S is a bold statement in loudspeaker design for the audiophile with limited space.

Frequency response (-6 dB, typical in room) 30 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 91 dB
Recommended amplifier power (RMS) 20 - 200 W
IsoFlare point source driver 8-inch

Key features

  • 2-way flagship floorstander from the F1 Series
  • 200 mm IsoFlare point source driver with multi-fibre bass / midrange cone and FyneFlute surround
  • 25 mm magnesium alloy dome compression tweeter with neodymium magnet system at the centre of the driver
  • Rigid cast aluminium driver chassis coupled to the internal bracing through damping material
  • Twin cavity reflex loading with downward-firing port onto the patented BassTrax Tractrix diffuser
  • Crossover at 1.8 kHz, hard wired on fibreboard panels and Deep Cryogenically Treated
  • Front-panel Energy (1.8 kHz - 34 kHz) and Presence (2.5 - 5.0 kHz) controls, each ±3 dB
  • Bi-wire terminals for single-wire, bi-wire or bi-amp connection, plus an earth terminal
  • High-mass machined aluminium plinth with heavy-duty spikes adjustable from above
  • Pressed high-density birch ply cabinet with solid wood trim and extensive bracing
  • Lacquered Piano Gloss Walnut with burr walnut inlay, hand finished in Scotland

Made for

  • High-end stereo listening rooms of modest size
  • Audiophiles using anything from single-ended triode valve amplifiers to high-power solid-state designs
  • Bi-wired and bi-amplified systems
  • Rooms where ideal speaker placement is not possible, thanks to BassTrax

Placement and set-up

  • Stereo: about 1.5 - 4.5 m apart
  • At least 0.5 m from the rear wall and no closer than 1 m to the side walls
  • Toe the cabinets in towards the listening position to focus the image
  • Fit the M12 floor coupling spikes and locking wheels, level from above with the adjustment tool and use the cups on wooden floors
  • Start with Energy and Presence at the central (level) position, then adjust in small steps
  • Run in for around 100 hours at normal listening levels

In the box

  • F1-8S loudspeakers
  • Accessories box: 8 × M12 floor coupling spikes, 8 spike locking wheels, 8 floor protection cups, 1 spike adjustment tool, 4 bi-wire links

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Piano Gloss Walnut (lacquered burr walnut)

Fyne Audio F1-8S: frequently asked questions

What amplifier suits the F1-8S?

Fyne Audio recommends 20 - 200 W RMS into the F1-8S's 8 Ω nominal impedance; continuous power handling is 100 W RMS and peak power handling 400 W. With 91 dB sensitivity (2.83 V/1 m) it also works with low-power valve amplifiers such as single-ended triodes, which will simply limit the maximum volume in large rooms.

Can the F1-8S be bi-wired or bi-amped?

Yes. It has separate HF and LF terminals. Use the supplied links for single wire (Fyne Audio advises connecting to the HF terminals), remove them for bi-wire, or drive each section from its own amplifier for bi-amping, with the links removed.

What do the Energy and Presence controls do?

Energy sets the tweeter level from the 1.8 kHz crossover upwards (1.8 kHz - 34 kHz, ±3 dB) and controls how bright the sound is. Presence affects only 2.5 - 5.0 kHz (±3 dB), changing articulation, vocal clarity and image depth. Start both at the centre and adjust with familiar recordings.

What is the earth terminal for?

It connects to the driver chassis and grounds radio frequency interference that could otherwise mask fine detail. Use a separate earth wire to the amplifier's ground connection, or for best results a dedicated screened loudspeaker cable.

How far from the walls should the F1-8S stand?

At least 0.5 m from the rear wall and 1 m from the side walls, about 1.5 - 4.5 m apart. The BassTrax diffuser makes it less sensitive to boundaries than a conventional ported speaker.

Where can I buy the Fyne Audio F1-8S in India?

The Fyne Audio F1-8S is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: High-end stereo listening room

Music lovers building a serious two-channel system around an integrated amplifier.

Connections

ConnectTo
Integrated amplifier left speaker outputLeft F1-8S HF terminals (links fitted)
Integrated amplifier right speaker outputRight F1-8S HF terminals (links fitted)
Amplifier ground terminalF1-8S earth terminal (optional)

Setup

  1. With help, unpack each F1-8S, fit the M12 spikes and locking wheels and level the speaker from above with the adjustment tool; use the cups on wooden or marble floors.
  2. Place the speakers about 1.5 - 4.5 m apart, at least 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier switched off, connect the cables to the HF terminals with the bi-wire links fitted, positive to positive and negative to negative.
  4. Toe the speakers in towards the listening seat until the stereo image focuses.
  5. Set Energy and Presence to the centre and make small changes with recordings you know well.

Tip: Choose an amplifier in the 20 - 200 W RMS range and allow around 100 hours of normal listening for running in.

Workflow 2: Bi-wired stereo system

Listeners who want the best possible sound from one stereo amplifier.

Connections

ConnectTo
Amplifier left outputLeft F1-8S HF and LF terminals (two cable runs or a bi-wire cable)
Amplifier right outputRight F1-8S HF and LF terminals

Setup

  1. Switch the amplifier off.
  2. Remove the bi-wire links from both speakers.
  3. Run two sets of cable, or a dedicated bi-wire cable, from each amplifier channel to the HF and LF terminals.
  4. Terminate the cables with good quality 4 mm banana plugs or spades and check polarity on every terminal.

Tip: Fyne Audio states that bi-wire mode gives the best sound quality from a single amplifier.

Workflow 3: Bi-amplified system

Audiophiles with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
Preamplifier outputsTwo stereo power amplifiers
LF power amplifierLF terminals of both F1-8S speakers
HF power amplifierHF terminals of both F1-8S speakers

Setup

  1. Remove the bi-wire links from both speakers; they must not be in place when bi-amping.
  2. Use one stereo power amplifier for the LF section of both speakers and the other for the HF section.
  3. Alternatively, drive each section of each speaker from its own monoblock.
  4. Match the gain of the amplifiers before listening.

Tip: Leaving the links fitted while bi-amping can damage the amplifiers: check them twice.

Workflow 4: Valve amplifier system

Owners of single-ended triode and other low-power valve amplifiers.

Connections

ConnectTo
Valve amplifier speaker outputs (8 Ω taps)F1-8S terminals

Setup

  1. Connect the amplifier to the F1-8S with the links fitted.
  2. Make use of the 91 dB (2.83 V/1 m) sensitivity: a low-power amplifier can drive the speakers safely.
  3. Keep volume within the amplifier's limits in larger rooms.
  4. Fine-tune the Presence control for vocal clarity and image depth.

Tip: Powers below the recommended minimum will not damage the speakers; they restrict maximum volume and dynamic range.

Workflow 5: Home cinema front pair

Dedicated cinema rooms where music and films share one high-end system.

Connections

ConnectTo
TV with HDMI eARCAV receiver or processor HDMI eARC input
Front left / right outputsF1-8S pair
Subwoofer outputPowered subwoofer (optional)

Setup

  1. Place the F1-8S pair either side of the screen with the same wall distances as for stereo.
  2. Connect them to the front left and right outputs of the receiver or the power amplifier driven by the processor.
  3. Run the receiver's speaker set-up for levels and distances.
  4. Use the Energy control to balance the treble against the room's furnishings.

Tip: The BassTrax diffuser spreads bass evenly, helping the front pair blend with the rest of the system.

Workflow 6: Adding super tweeters

F1-8S owners who want to extend the system with Fyne Audio's add-on super tweeters.

Connections

ConnectTo
F1-8S speaker terminalsS-Trax or SuperTrax input

Setup

  1. Position an S-Trax on top of each cabinet 69 mm from the front edge, or a SuperTrax 45 mm from the front edge, as Fyne Audio specifies for the F1-8S.
  2. Connect the super tweeter to the speaker terminals as described in its own manual.
  3. Set the super tweeter level by ear with familiar recordings.
  4. Re-check the toe-in of the main speakers.

Tip: The front-edge positions are published for the alignment of each Fyne Audio super tweeter on this model.

Request a Quote

FYNE AUDIO F1-8S

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›