FYNE AUDIO F502SP product guide and data sheet cover
‹
FYNE AUDIO F502SP product guide and data sheet coverFYNE AUDIO F502SP data sheet page 2: Special Production IsoFlare driverFYNE AUDIO F502SP data sheet page 3: Hand built and finished in the UKFYNE AUDIO F502SP data sheet page 4: BassTrax: even bass in any roomFYNE AUDIO F502SP data sheet page 5: Placement and set-upFYNE AUDIO F502SP data sheet page 6: Crossover and connectionsFYNE AUDIO F502SP data sheet page 7: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F502SP

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: F500 SP SERIES

Fyne Audio F502SP: UK-built 2.5-way floorstander with 8-inch SP IsoFlare driver, BassTrax plinth, 30 Hz - 34 kHz, 92 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2.5-way, downward-firing port with BassTrax Tractrix diffuser, twin cavity loading system
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)30 Hz - 34 kHz
Sensitivity (2.83 V/1 m)92 dB

Power

Recommended amplifier power30 - 200 W RMS
Continuous power handling100 W RMS
Peak power handling400 W

Drivers

IsoFlare point source driver1 × 200 mm (8-inch) SP IsoFlare point source driver: multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, neodymium magnet system
Bass driver1 × 200 mm multi-fibre bass cone, FyneFlute surround

Crossover

Crossover frequency250 Hz and 1.7 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated

Physical

Cabinet constructionHigh-density fibreboard with extensive internal bracing
Dimensions (H × W × D)1111 × 338 × 380 mm (43.7 × 13.3 × 15.0 in)
Dimensions includeGrille, terminals and plinth; spikes excluded
Net weight, each30.4 kg (67.0 lb)
S-Trax position (from cabinet front edge)61 mm (2.4 in)
SuperTrax position (from cabinet front edge)37 mm (1.5 in)

Finishes

Finish optionsPiano Gloss Black, Piano Gloss White, Piano Gloss Walnut, Natural Walnut

Versions

F80000251Piano Gloss Black
F80000252Piano Gloss White
F80000250Piano Gloss Walnut
F80000253Natural Walnut

Product overview

The Fyne Audio F502SP is the largest model in the UK-built F500 SP Special Production Series: a 2.5-way floorstanding loudspeaker using the premium 8-inch (200 mm) IsoFlare driver and 8-inch bass / mid driver from the F702, with the F700's crossover components and BassTrax plinth.

Improving on the F502, the F502SP uses the premium 200 mm IsoFlare driver and 200 mm bass / mid driver from the F702, both with rigid multi-fibre cones and FyneFlute roll surrounds. The IsoFlare's 25 mm magnesium compression tweeter has a unique HF waveguide pole piece that delivers a very even, full-range frequency response and outstanding stereo imaging. The F700's advanced crossover components and aluminium sandwich plinth with the BassTrax Tractrix bass diffuser are re-engineered to tune the F502SP's more compact cabinet.

The F500 SP Series blends the refinements of F700 Series technology with the classic F500 cabinet design. The SP IsoFlare driver is a direct derivative of the F700 point source units: a powerful neodymium motor with a vented rear chamber moves the tweeter's fundamental resonance well below the crossover point, a computer-modelled HF waveguide gives a flat response out to its 30 kHz design parameters, and heatsinking through a metal pole piece keeps the treble smooth even after long, loud listening. The bespoke multi-fibre cone sits in a rigid cast aluminium chassis with a separate flux focusing magnet for low-frequency efficiency.

The low-frequency output is channelled through a downward-firing port onto the BassTrax Tractrix diffuser, which converts plane-wave port energy into a spherical 360-degree wavefront that exits evenly through the plinth. Bass is smooth and the speaker is much less critical of room position. On the floorstanding SP models the diffuser is built into Fyne Audio's twin-layer plinth, machined from thick aluminium plates separated by aluminium spacers, with spikes adjusted from the top and clamped by knurled lock nuts.

The crossover uses low-loss laminated core inductors, high-grade polypropylene capacitors and silver-plated OFC internal wiring treated by Fyne Audio's Cryo-Lite process: the wiring is super-frozen to -170 °C and slowly thawed over several days to relieve micro-stresses, for greater transparency. A bi-wire terminal panel adds a fifth terminal to ground the driver chassis and drain amplifier- or cable-borne RF interference. The higher-density fibreboard cabinet is internally braced and damped with bonded acoustic fibre and polyether foam, and every pair is designed, built, hand finished and pair matched in Fyne Audio's UK factory.

Frequency response (-6 dB, typical in room) 30 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 92 dB
Recommended amplifier power (RMS) 30 - 200 W
SP IsoFlare point source driver 8-inch

Key features

  • UK-built Special Production 2.5-way floorstander, hand built and finished in Glasgow
  • 200 mm SP IsoFlare point source driver with 25 mm magnesium dome compression tweeter at its centre
  • Additional 200 mm multi-fibre bass driver with FyneFlute surround, twin cavity loading system
  • BassTrax Tractrix diffuser with downward-firing port for a smooth, even 360-degree bass wavefront
  • Computer-modelled HF waveguide, vented rear chamber and metal pole piece heatsinking
  • Crossover with low-loss laminated core inductors, polypropylene capacitors and Cryo-Lite treated silver-plated OFC wiring
  • Bi-wire terminal panel with a fifth terminal for driver chassis grounding
  • Twin-layer machined aluminium plinth with top-adjustable spikes, knurled lock nuts and aluminium cups
  • Higher-density fibreboard cabinet, internally braced, with driver rears coupled to the bracing by damping mastic
  • Diamond machine-cut aluminium driver trim; Piano Gloss Black, Piano Gloss White, Piano Gloss Walnut or Natural Walnut
  • Magnetic grille with mounts front and rear for storage

Made for

  • Stereo listening rooms that call for full-range bass without a subwoofer
  • Front left and right channels of a home cinema system
  • Rooms where speakers cannot stand far from the walls, thanks to BassTrax
  • Listeners who want UK-built, hand-finished loudspeakers in a real wood veneer

Placement and set-up

  • Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
  • Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Thread the four carpet spikes and adjustment thumb wheels into the plinth, then level from above with the HEX key provided; use the cups on wooden or delicate floors
  • Run in for around 40 hours at normal listening levels

In the box

  • F502SP loudspeaker with magnetic grille
  • 4 carpet spikes with adjustment thumb wheels
  • Floor cups
  • HEX key

Connections

  • Bi-wire terminal panel: one pair for HF, one pair for LF, with link bars for single wiring
  • Fifth terminal: earth / ground connection to the driver chassis (optional use)
  • Accepts bare wire or 4 mm plugs

Finishes

  • Piano Gloss Black
  • Piano Gloss White
  • Piano Gloss Walnut (lacquered real wood veneer)
  • Natural Walnut veneer

Fyne Audio F502SP: frequently asked questions

What amplifier suits the F502SP?

Fyne Audio recommends 30 - 200 W RMS into the F502SP's 8 Ω nominal impedance. Power handling is 100 W RMS continuous and 400 W peak, and sensitivity is 92 dB (2.83 V/1 m).

Can the F502SP be bi-wired?

Yes. There are two pairs of terminals, one for the HF and one for the LF. Keep the link bars in place for a single cable, or remove them and use two sets of cable or a dedicated bi-wire cable, which Fyne Audio says gives the best possible sound quality.

What is the fifth terminal for?

It connects to the drive unit chassis so that radio frequency interference can be grounded rather than passed back to the amplifier, where it would reduce fine detail. A separate earth wire can be used, but the best results come from a dedicated screened loudspeaker cable.

What does BassTrax do?

The downward-firing port feeds a Tractrix profile cone that turns the port energy into a 360-degree wavefront leaving evenly through the plinth. Bass is smoother and the speaker is much less critical of room position than a conventional ported design.

Should I listen with the grille on or off?

The magnetic grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best sound. On the F502SP it can be stored magnetically on the rear of the cabinet.

Where can I buy the Fyne Audio F502SP in India?

The Fyne Audio F502SP is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers who want detailed, natural stereo from a UK-built pair.

Connections

ConnectTo
Integrated amplifier left speaker outputLeft F502SP terminals
Integrated amplifier right speaker outputRight F502SP terminals

Setup

  1. Fit the carpet spikes and thumb wheels, stand the speakers in place and level them from above with the HEX key; use the cups on wooden or marble floors.
  2. Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier switched off, connect positive to positive and negative to negative, keeping the link bars in place for single wiring.
  4. Toe the speakers in towards the listening seat until the stereo image locks in.
  5. Remove the grilles for the best sound.

Tip: Choose an amplifier in the 30 - 200 W RMS range and allow around 40 hours of normal listening for the speakers to run in.

Workflow 2: Bi-wired system with chassis earth

Listeners who want the last degree of detail from their amplifier and cables.

Connections

ConnectTo
Amplifier speaker outputs (via two cable sets or a bi-wire cable)F502SP HF and LF terminals, link bars removed
Screened loudspeaker cable screen or separate earth wireF502SP earth terminal

Setup

  1. Switch the amplifier off.
  2. Remove the link bars between the HF and LF terminals.
  3. Run two sets of cable, or a dedicated bi-wire cable, from each amplifier channel to the HF and LF terminals.
  4. Optionally connect the fifth terminal to ground with a separate earth wire or, better, a dedicated screened loudspeaker cable.
  5. Check every connection is positive to positive and negative to negative before switching on.

Tip: Grounding the driver chassis drains radio frequency interference that would otherwise reduce fine detail and resolution.

Workflow 3: Home cinema front pair

Families building a living-room cinema around a TV and an AV receiver.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front left / right outputsF502SP pair
AV receiver subwoofer outputPowered subwoofer

Setup

  1. Place the F502SP pair either side of the TV, toed in towards the main seat.
  2. Wire each speaker to the receiver with the receiver switched off.
  3. Add a matching F57SP-6 or F57SP-8 centre speaker, voiced to integrate with the F500SP models, so dialogue matches the front pair.
  4. Run the receiver's speaker set-up so levels, distances and crossover suit the room.

Tip: The point source IsoFlare driver keeps voices and effects focused as they move across the room.

Workflow 4: Living room close to the wall

Apartments where the speakers cannot stand far out into the room.

Connections

ConnectTo
Stereo amplifier speaker outputsF502SP pair

Setup

  1. Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
  2. Let the BassTrax diffuser spread the port output in a 360-degree wavefront through the plinth.
  3. Play familiar bass-rich music and move the speakers a little at a time until the bass sounds even.
  4. Fine-tune the toe-in for imaging.

Tip: BassTrax makes the speaker much less critical of room positioning than a conventional port.

Workflow 5: Vinyl corner

Record collectors with a turntable and a stereo amplifier with a phono input.

Connections

ConnectTo
TurntableAmplifier phono input
Amplifier speaker outputsF502SP pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect the turntable to the phono input and the amplifier to the speakers.
  3. Spike the speakers to the floor and lock the spikes with the knurled nuts so the cabinets stay steady.
  4. Set the toe-in so voices sit in the centre between the speakers.

Tip: Run the speakers in for around 40 hours before judging the sound.

Workflow 6: Streaming and TV in one stereo system

Living rooms where one stereo pair serves music streaming and the TV.

Connections

ConnectTo
Network streamerIntegrated amplifier line input
TV audio outputAmplifier HDMI ARC or optical input (as the amplifier provides)
Amplifier speaker outputsF502SP pair

Setup

  1. Place a speaker either side of the TV, about 1.5 - 4.5 m apart.
  2. Connect the streamer and the TV to the amplifier.
  3. Wire the F502SP pair to the amplifier's speaker outputs.
  4. Set the TV to send its sound to the external audio output.

Tip: Clean the gloss or veneer cabinets only with a microfibre cloth, and keep them out of direct sunlight.

Request a Quote

FYNE AUDIO F502SP

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›