






FYNE AUDIO F55E
PRICE ON ENQUIRY
Fyne Audio F55E: slim 2.5-way floorstanding speaker with 5-inch IsoFlare point source driver and BassTrax diffuser, 42 Hz - 38 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| System type | 2.5-way, downward-firing port with BassTrax Tractrix diffuser |
| Nominal impedance | 8 Ω |
| Frequency response (-6 dB, typical in room) | 42 Hz - 38 kHz |
| Sensitivity (2.83 V/1 m) | 88 dB |
Power
| Recommended amplifier power | 30 - 120 W RMS |
| Continuous power handling | 60 W RMS |
Drivers
| IsoFlare point source driver | 1 × 125 mm multi-fibre bass / mid with 19 mm titanium dome compression tweeter |
| Bass driver | 1 × 125 mm multi-fibre |
Crossover
| Crossover frequencies | 350 Hz and 1.8 kHz |
| Crossover type | 2nd order low pass, 1st order high pass |
Physical
| Dimensions (H × W × D) | 925 × 210 × 236 mm (36.4 × 8.3 × 9.3 in) |
| Dimensions include | Grille, terminals and plinth; spikes excluded |
| Net weight, each | 11.9 kg (26.2 lb) |
| S-Trax position (from cabinet front edge) | 32 mm |
| Terminals | Single set |
| Grille | Magnetic |
Finishes
| Finish | Black Ash vinyl wrap |
Product overview
The Fyne Audio F55E is a slim 2.5-way floorstanding loudspeaker from the F500E Series, built around a 5-inch IsoFlare point source driver with a second 5-inch bass driver and the patented BassTrax port system, made for music and films in smaller rooms.
The F55E brings high-end audio technology to a more accessible level, combining powerful performance with a compact, space-saving design. At its heart is Fyne Audio's 125 mm IsoFlare point source driver: a multi-fibre bass / mid cone with a 19 mm titanium dome compression tweeter mounted at its centre, so the sound radiates from a single point. The result is clear, natural sound with precise imaging and wide, controlled directivity across all listening positions.
The F500E Series uses the latest evolution of IsoFlare. A computer-optimised HF waveguide reduces internal reflections for a flatter frequency response, while neodymium magnets and a titanium diaphragm push break-up modes beyond 30 kHz for crisp, extended treble. A vented rear chamber lowers resonance for a smoother midrange, and the FyneFlute surround supports the cone.
A second 125 mm multi-fibre bass driver works below 350 Hz, and the downward-firing port feeds the patented BassTrax Tractrix diffuser in the plinth. BassTrax turns the port energy into a smooth 360-degree wavefront, so deep, controlled bass fills the room evenly without boundary boom, and placement becomes less critical. That makes the F55E particularly at home in small rooms and difficult acoustic spaces.
The crossover uses precision components, including low-loss laminated core inductors and high-grade polypropylene film capacitors; it is computer optimised and then fine-tuned by ear for seamless integration between the drivers. The cabinet is made of high-rigidity MDF with internal bracing, finished in a Black Ash vinyl wrap, with a magnetic grille that can be stored on the rear of the speaker. Designed by Fyne Audio's engineers in Scotland, the F55E suits both a stereo system and the front channels of a home cinema.
| Frequency response (-6 dB, typical in room) | 42 Hz - 38 kHz |
| Sensitivity (2.83 V/1 m) | 88 dB |
| Recommended amplifier power (RMS) | 30 - 120 W |
| IsoFlare point source driver | 5-inch |
Key features
- 2.5-way floorstanding speaker with a compact, space-saving footprint
- 125 mm IsoFlare point source driver: multi-fibre bass / mid with a 19 mm titanium dome compression tweeter at its centre
- Additional 125 mm multi-fibre bass driver
- BassTrax Tractrix diffuser with downward-firing port for even, 360-degree bass dispersion
- Computer-optimised HF waveguide, neodymium magnets and titanium diaphragm with break-up modes beyond 30 kHz
- FyneFlute surround technology
- Crossover at 350 Hz and 1.8 kHz with low-loss laminated core inductors and polypropylene film capacitors
- High-rigidity MDF cabinet with internal bracing
- Magnetic grille that can be stored on the rear of the cabinet
- Plinth with adjustable spikes, thumb wheels and spike cups
- Black Ash vinyl wrap finish
Made for
- Stereo music systems in small and medium rooms
- Front left and right channels of a home cinema system
- Rooms where the speakers cannot be placed far from walls, thanks to BassTrax
- Listeners stepping into high-performance sound with limited space
Placement and set-up
- Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
- Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
- Experiment with toe-in towards the listener for the best stereo imaging
- Thread the four spikes and thumb wheels into the plinth, level the speaker and lock the spikes; use the cups on wooden or delicate floors
- Run in for around 40 hours at normal listening levels
In the box
- F55E loudspeaker with magnetic grille
- Accessories kit: 4 spikes, 4 adjustment thumb wheels, 4 spike cups
Connections
- One pair of speaker terminals (single wire)
- Accepts bare wire, 4 mm plugs or spade connectors
Finishes
- Black Ash vinyl wrap
Fyne Audio F55E: frequently asked questions
What kind of amplifier suits the F55E?
Fyne Audio recommends an amplifier delivering 30 - 120 W RMS into the F55E's 8 Ω nominal impedance. Its continuous power handling is 60 W RMS and its sensitivity is 88 dB (2.83 V/1 m).
How close to the wall can the F55E stand?
Ideally no closer than 0.5 m to the rear wall and 1 m to the side walls. The BassTrax diffuser spreads the bass in a 360-degree wavefront, so the speaker is less reliant on precise placement than a conventional ported design.
Can the F55E be bi-wired?
No. The F55E has a single set of speaker terminals. Connect positive to positive and negative to negative with bare wire, 4 mm plugs or spade connectors.
Is the F55E suitable for home cinema?
Yes. The IsoFlare point source driver articulates fine film detail with pinpoint accuracy, and the F500E Series includes the F5E LCR and F502E LCR for the centre and surround channels.
Should I listen with the grille on or off?
The magnetic grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best sound. On the F55E it can be stored on the rear of the cabinet.
Where can I buy the Fyne Audio F55E in India?
The Fyne Audio F55E is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo system in a compact living room
Music lovers in apartments who want floorstanding sound without a big footprint.
Connections
| Connect | To |
|---|---|
| Integrated amplifier left speaker output | Left F55E speaker terminals |
| Integrated amplifier right speaker output | Right F55E speaker terminals |
Setup
- Fit the four spikes and thumb wheels to the plinth of each speaker, level it and lock the spikes; use the spike cups on wooden or marble floors.
- Place the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
- With the amplifier switched off, connect positive to positive and negative to negative using bare wire, 4 mm plugs or spades.
- Angle the speakers slightly towards the listening seat and adjust the toe-in until the stereo image locks in.
- Remove the grilles for the best sound and store them magnetically on the rear of the cabinets.
Tip: Choose an amplifier in the 30 - 120 W RMS range; the F55E reaches its best after about 40 hours of normal listening.
Workflow 2: 5.1 home theatre front pair
Families building a living-room cinema around a TV and an AV receiver.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver front left / right outputs | F55E pair |
| AV receiver centre output | F5E LCR above or below the TV |
| AV receiver subwoofer output | Powered subwoofer |
Setup
- Stand the F55E pair either side of the TV, toed in towards the main seat.
- Wire each speaker to the receiver's front left and right outputs with the receiver switched off.
- Add an F5E LCR for the centre channel so dialogue matches the timbre of the front pair.
- Run the receiver's speaker set-up so levels, distances and crossover suit the room.
Tip: The shared IsoFlare driver technology keeps voices and effects consistent as they move across the front of the room.
Workflow 3: Small or difficult room
Bedrooms, studies and rooms where speakers must stand nearer the wall than ideal.
Connections
| Connect | To |
|---|---|
| Stereo amplifier speaker outputs | F55E speaker terminals |
Setup
- Place the speakers as far from the walls as the room allows.
- Rely on the BassTrax diffuser in the plinth to spread the port output in a 360-degree wavefront.
- Listen to familiar bass-rich music and move the speakers a little at a time until the bass sounds even.
- Fine-tune the toe-in for imaging.
Tip: BassTrax reduces boundary boom, so the F55E is less reliant on precise placement than a conventional ported speaker.
Workflow 4: Vinyl corner
Record collectors with a turntable and a stereo amplifier with a phono input.
Connections
| Connect | To |
|---|---|
| Turntable | Amplifier phono input |
| Amplifier speaker outputs | F55E pair |
Setup
- Keep the turntable on a solid surface away from the speakers.
- Connect the turntable to the amplifier's phono input and the amplifier to the F55E pair.
- Spike the speakers to the floor so the cabinets stay steady.
- Set the toe-in so voices sit in the centre between the speakers.
Tip: The IsoFlare point source driver keeps the stereo image natural even when you listen from a sofa off to one side.
Workflow 5: TV and music system with a stereo amplifier
Living rooms where one stereo pair serves both films and music.
Connections
| Connect | To |
|---|---|
| TV audio output | Stereo amplifier input with HDMI ARC or optical (as the amplifier provides) |
| Stereo amplifier speaker outputs | F55E pair |
Setup
- Place a speaker either side of the TV, about 1.5 - 4.5 m apart.
- Connect the TV to the amplifier's matching input.
- Wire the F55E pair to the amplifier's speaker outputs.
- Set the TV to send its sound to the external audio output.
Tip: Add a powered subwoofer later through the amplifier's subwoofer output if you want more depth with films.
Workflow 6: Home office and listening room
People who work from home and want serious music in the same room.
Connections
| Connect | To |
|---|---|
| Computer or network streamer | Integrated amplifier |
| Integrated amplifier speaker outputs | F55E pair |
Setup
- Place the speakers either side of the desk, angled towards the chair.
- Connect the streamer or computer to the amplifier and the amplifier to the speakers.
- Use the magnetic grilles while working, and remove them for focused listening.
- Clean the cabinets only with a lightly moistened microfibre cloth.
Tip: The slim 210 mm wide cabinet fits beside a desk without crowding the room.








