







FYNE AUDIO F57SP-8
PRICE ON ENQUIRY
Fyne Audio F57SP-8: UK-built centre channel with 8-inch IsoFlare point source driver, matching bass driver and switchable ABR, 92 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| System type | 2.5-way with adjustably damped ABR |
| Nominal impedance | 8 Ω |
| Frequency response (-6 dB, typical in room) | 42 Hz - 34 kHz |
| Sensitivity (2.83 V/1 m) | 92 dB |
Power
| Recommended amplifier power | 30 - 200 W RMS |
| Continuous power handling | 100 W RMS |
| Peak power handling | 400 W |
Drivers
| IsoFlare point source driver | 1 × 200 mm: multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, neodymium magnet system |
| Bass driver | 1 × 200 mm, multi-fibre cone, FyneFlute surround |
| Auxiliary bass radiator (ABR) | 1 × 200 mm, multi-fibre cone, FyneFlute surround |
Crossover
| Crossover frequencies | 250 Hz and 1.7 kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass |
| System adjustments | Electromagnetically damped ABR with Free Space and Boundary settings |
Physical
| Cabinet construction | Pressed high-density MDF, internally braced |
| Dimensions (H × W × D) | 270 × 760 × 340 mm (10.6 × 29.9 × 13.4 in) |
| Dimensions include | Terminals and grille |
| Net weight, each | 19.8 kg (43.7 lb) |
Finishes
| Finish options | Piano Gloss Black, Piano Gloss White, Piano Gloss Walnut |
Versions
| F80000641 | Piano Gloss Black |
| F80000640 | Piano Gloss Walnut |
| F80000642 | Piano Gloss White |
Product overview
The Fyne Audio F57SP-8 is the large, UK-built Special Production centre channel for the biggest home theatres and multichannel music systems, with an 8-inch (200 mm) IsoFlare point source driver, an 8-inch supplementary bass driver and an 8-inch electromagnetically damped, switchable ABR.
Ideally suited to the F502SP floorstanders and the larger F700 Series models, the F57SP-8 handles up to 400 W peaks and offers a high 92 dB sensitivity (2.83 V/1 m) for real dynamic power, making it the centre channel for the biggest film and music productions.
The F57SP Series distils the best technology from the F500SP and F700 Series into premium centre channel models tuned to deliver dialogue exactly as the director intended. Voicing, impedance and efficiency are matched for a seamless front soundstage with any F500SP or F700 main loudspeaker, and the cabinets are finished to match them in Piano Gloss Black, Piano Gloss White or gloss lacquered Walnut veneer.
The three drivers in the horizontal cabinet are identically sized, but that is where the similarity ends. At the centre is the IsoFlare point source driver: a 25 mm magnesium dome compression tweeter with a powerful neodymium magnet system and a computer-optimised waveguide, mounted at the heart of a multi-fibre mid / bass cone with a FyneFlute roll surround in a rigid cast aluminium chassis. Its coherent timing and isotropic radiation give clarity, timbre and accurate voices and vocals. Because the cabinet is sealed for practical installation, a supplementary 200 mm bass driver works below 250 Hz.
The third driver is an auxiliary bass radiator (ABR) that extends the bass without porting the cabinet. Unlike a conventional passive radiator, Fyne Audio's ABR has a full voice coil and magnet assembly, so its cone damping can be controlled electromagnetically: a switch on the rear panel selects 'Free Space' or 'Boundary' to compensate for the bass gain of close-to-wall placement. The crossover uses the same architecture as the F500SP and F700 models, with low-loss laminated core inductors and high-grade polypropylene capacitors hand soldered onto a self-damping fibreboard panel, and high-purity silver-plated OFC internal wiring.
| Frequency response (-6 dB, typical in room) | 42 Hz - 34 kHz |
| Sensitivity (2.83 V/1 m) | 92 dB |
| Recommended amplifier power (RMS) | 30 - 200 W |
| Peak power handling | 400 W |
Key features
- UK-built Special Production centre channel, designed, built and hand finished in the UK
- 200 mm IsoFlare point source driver with 25 mm magnesium dome compression tweeter and neodymium motor
- Supplementary 200 mm multi-fibre bass driver with FyneFlute surround, working below 250 Hz
- 200 mm auxiliary bass radiator with full voice coil and magnet for electromagnetic damping
- Free Space / Boundary switch to suit placement away from or against the wall
- Sealed 2.5-way design for practical installation in home cinemas
- Crossover with laminated core inductors and polypropylene capacitors on a self-damping fibreboard panel
- High-purity silver-plated OFC internal wiring
- Bi-wire terminals with custom binding posts
- Pressed high-density MDF cabinet, extensively braced, drivers coupled to the cabinet with energy-absorbing damping material
- Voicing, impedance and efficiency matched to the F500SP and F700 Series
- Magnetic grille, subtle black driver surrounds and bump-on feet
Made for
- Centre channel with the F502SP floorstanders and the larger F700 Series models
- The largest home theatres and dedicated cinema rooms
- Multichannel music systems
- Placement below or above a screen, on furniture or on a stand such as the FS5
Placement and set-up
- Place the centre equidistant between the main front speakers and in the same plane, ideally at ear level
- Position the main front speakers as for stereo: about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls
- Set the rear switch to 'Free Space' for normal positioning, or 'Boundary' if the speaker must stand right against the rear wall
- Fit the self-adhesive feet underneath to protect the surface below
In the box
- F57SP-8 centre channel loudspeaker with magnetic grille
- 4 self-adhesive feet
Connections
- Bi-wire terminal panel: HF and LF terminal pairs with link bars for single wiring
- Accepts bare wire or 4 mm plugs
- Free Space / Boundary ABR damping switch on the terminal panel
Finishes
- Piano Gloss Black
- Piano Gloss White
- Piano Gloss Walnut (gloss lacquered real walnut veneer)
Fyne Audio F57SP-8: frequently asked questions
Which main speakers does the F57SP-8 match?
It is voiced, impedance and efficiency matched for the F502SP floorstanders and the larger F700 Series models, and its finishes match them, for a seamless front soundstage.
What does the Free Space / Boundary switch do?
It varies the electromagnetic damping applied to the auxiliary bass radiator. Use 'Free Space' for normal positioning, and 'Boundary' when the centre channel has to sit right against the rear wall, to compensate for the extra bass reinforcement.
What amplifier power suits the F57SP-8?
Fyne Audio recommends 30 - 200 W RMS. Power handling is 100 W RMS continuous and 400 W peak, sensitivity is 92 dB (2.83 V/1 m) and nominal impedance 8 Ω.
Can the F57SP-8 be bi-wired?
Yes. Keep the link bars in place for a single cable, or remove them and use two sets of cable or a dedicated bi-wire cable for the best possible sound quality.
Why is the cabinet sealed?
A sealed cabinet is practical to install in home cinemas, close to screens and walls. The supplementary 200 mm bass driver and the tuneable ABR extend the bass without the need for a port.
Where can I buy the Fyne Audio F57SP-8 in India?
The Fyne Audio F57SP-8 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: 5.1 home theatre in the living room
Families building a cinema system around a TV and an AV receiver.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver centre output | F57SP-8 terminals |
| AV receiver front and surround outputs | F500SP or F700 Series speakers |
| AV receiver subwoofer output | Powered subwoofer |
Setup
- Place the F57SP-8 centrally below or above the screen, in line with the front speakers and as close to ear level as possible.
- Fit the four self-adhesive feet so the cabinet does not mark the furniture.
- With the receiver switched off, wire the centre output positive to positive and negative to negative.
- Set the rear switch to 'Free Space', or to 'Boundary' if the speaker stands right against the wall.
- Run the receiver's speaker set-up so levels, distances and crossover suit the room.
Tip: Matching the centre to F500SP or F700 front speakers keeps voices and effects seamless as they pan across the screen.
Workflow 2: Dedicated cinema room
Home theatre owners who want dialogue exactly as the director intended.
Connections
| Connect | To |
|---|---|
| AV processor or receiver centre output | F57SP-8 |
| Front left / right outputs | F502SP or F700 floorstanders |
Setup
- Mount the F57SP-8 on a rigid stand such as the FS5 or a solid shelf, centred on the screen.
- Aim the speaker at the main seating row and keep it in the same plane as the front pair.
- Bi-wire it if the amplifier and cable allow: remove the link bars and run separate HF and LF cables.
- Remove the grille for critical listening.
Tip: With 92 dB sensitivity and 400 W peak handling, the F57SP-8 keeps up with large-scale soundtracks.
Workflow 3: Centre speaker in a TV cabinet against the wall
Living rooms where the centre must sit in a unit close to the rear wall.
Connections
| Connect | To |
|---|---|
| AV receiver centre output | F57SP-8 single-wired with link bars in place |
Setup
- Place the speaker on the TV unit with its front edge flush to the front of the shelf.
- Set the Free Space / Boundary switch to 'Boundary' to compensate for the bass reinforcement of the wall.
- Wire it with a single cable, keeping the link bars in place.
- Check dialogue clarity with a familiar film scene and fine-tune the centre level on the receiver.
Tip: The sealed cabinet with ABR means no rear port can be choked by the wall behind it.
Workflow 4: Multichannel music system
Listeners who play multichannel concerts and immersive music mixes.
Connections
| Connect | To |
|---|---|
| Network streamer or disc player | AV receiver |
| AV receiver centre output | F57SP-8 |
Setup
- Set the front speakers as for stereo, 1.5 - 4.5 m apart.
- Place the F57SP-8 centrally between them at ear level.
- Let the receiver's set-up match levels and distances.
- Use the same finish across the front speakers for a coherent look.
Tip: The IsoFlare point source driver keeps vocals natural from every seat, not just the centre one.
Workflow 5: Bi-wired centre channel
Enthusiasts who want the best possible sound quality from the centre.
Connections
| Connect | To |
|---|---|
| Receiver centre output (via two cable sets or a bi-wire cable) | F57SP-8 HF and LF terminals |
Setup
- Switch the receiver off.
- Remove the link bars between the HF and LF terminals.
- Connect one cable set to the HF pair and one to the LF pair, positive to positive and negative to negative.
- Switch on and check the centre channel with the receiver's test tone.
Tip: Never connect the speaker to a mains supply; it must always be driven by a suitable amplifier.
Workflow 6: Upgrade of an existing F500SP or F700 system
Owners of F500SP or F700 stereo pairs moving to home cinema.
Connections
| Connect | To |
|---|---|
| AV receiver front outputs | Existing F500SP or F700 pair |
| AV receiver centre output | F57SP-8 |
Setup
- Move the stereo pair to the receiver's front outputs.
- Add the F57SP-8 between them, in the same finish.
- Add surround speakers and a subwoofer as the room allows.
- Run the receiver's room set-up.
Tip: Clean the gloss cabinet only with a microfibre cloth and keep it out of long exposure to direct sunlight.








