







FYNE AUDIO F703
PRICE ON ENQUIRY
Fyne Audio F703: UK-built 2.5-way floorstander with 10-inch IsoFlare point source driver, BassTrax diffuser, 26 Hz - 26 kHz, 94 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| System type | 2.5-way, downward-firing port with BassTrax Tractrix diffuser, twin cavity loading system |
| Nominal impedance | 8 Ω |
| Frequency response (-6 dB, typical in room) | 26 Hz - 26 kHz |
| Sensitivity (2.83 V/1 m) | 94 dB |
Power
| Recommended amplifier power | 20 - 250 W RMS |
| Continuous power handling | 125 W RMS |
| Peak power handling | 500 W |
Drivers
| IsoFlare point source driver | 1 × 250 mm: multi-fibre bass / midrange cone, FyneFlute surround, 75 mm titanium dome compression tweeter, ferrite magnet system |
| Bass driver | 1 × 250 mm multi-fibre cone, FyneFlute surround |
Crossover
| Crossover frequency | 200 Hz and 850 Hz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated |
Physical
| Cabinet construction | Pressed high-density birch ply with extensive internal bracing |
| Dimensions (H × W × D) | 1180 × 438 × 464 mm (46.5 × 17.2 × 18.3 in) |
| Dimensions include | Grille, terminals and plinth; spikes excluded |
| Net weight, each | 48.3 kg (106.5 lb) |
| S-Trax position (from cabinet front edge) | 94 mm (3.7 in) |
| SuperTrax position (from cabinet front edge) | 70 mm (2.8 in) |
Finishes
| Finish options | Piano Gloss Black, Piano Gloss White, Piano Gloss Walnut |
Versions
| F80000211 | Piano Gloss Black |
| F80000210 | Piano Gloss Walnut |
| F80000212 | Piano Gloss White |
Product overview
The Fyne Audio F703 is a UK-built 2.5-way floorstanding loudspeaker from the F700 Series, blending a 10-inch (250 mm) IsoFlare point source driver and a 10-inch multi-fibre bass driver in a twin-cavity tuned cabinet with a BassTrax diffuser in its downward-firing port.
Using trickle-down technology from the F1 Series, the F703 is articulate and powerful, capable of stunning dynamics and real-world volumes. Its 250 mm IsoFlare driver uses a 75 mm titanium dome compression tweeter with a ferrite magnet system, crossing over at 850 Hz, while the 250 mm bass driver works below 200 Hz. With 94 dB sensitivity and a response down to 26 Hz (-6 dB, typical in room), it is built for audiophiles.
IsoFlare point source drivers are at the heart of every F700 model. A compression tweeter is mounted coaxially at the heart of a potent bass / midrange driver with a rigid multi-fibre cone and a FyneFlute roll surround, so sound radiates isotropically from a single point for precise imaging and an even frequency response. The massive bass motor includes a flux focusing magnet for higher low-frequency sensitivity.
The cabinet is handcrafted from high-density birch plywood, chosen for its very low colouration, with a sculpted shape whose curved panels diffuse standing waves and extensive internal bracing, plus a twin-cavity tuning system. Below it, Fyne Audio's BassTrax system feeds a large downward-firing port onto a Tractrix profile diffuser cone on the machined aluminium plinth, creating a true 360-degree bass wavefront. The result is the depth and scale of a large ported speaker without the bass bloom of typical port / room interaction, and far less sensitivity to room position.
The crossover combines low-loss inductors, high-grade capacitors and high-purity silver-plated internal wiring treated by Fyne Audio's Cryo-Lite super-freezing and slow-thawing process for a clean, transparent signal path. The bi-wire terminal panel has premium gold-plated binding posts and gold-plated link cables, plus a fifth terminal for grounding the driver chassis against radio frequency interference. Each speaker is built in the UK and finished in high-gloss piano lacquer.
| Frequency response (-6 dB, typical in room) | 26 Hz - 26 kHz |
| Sensitivity (2.83 V/1 m) | 94 dB |
| Recommended amplifier power (RMS) | 20 - 250 W |
| IsoFlare point source driver | 10-inch |
Key features
- UK-built 2.5-way floorstanding loudspeaker with trickle-down technology from the flagship F1 Series
- 250 mm IsoFlare point source driver with 75 mm titanium dome compression tweeter at its centre
- Additional 250 mm multi-fibre bass driver with FyneFlute surround and twin-cavity loading
- BassTrax Tractrix diffuser under a large downward-firing port for a 360-degree bass wavefront
- Multi-fibre cones, FyneFlute roll surrounds and flux focusing magnet
- Sculpted, curved cabinet in high-density birch plywood with extensive internal bracing
- Crossover with low-loss inductors, high-grade capacitors and Cryo-Lite treated silver-plated wiring
- Bi-wire terminals with gold-plated binding posts and link cables, plus a chassis earth terminal
- Machined aluminium plinth of twin 8 mm plates with spikes, large knurled lock rings and aluminium cups
- Magnetically attached grille
- High-gloss piano lacquer in black, white or walnut veneer
Made for
- Large stereo listening rooms
- Dedicated home cinema front channels
- Low-powered amplifiers, thanks to the 94 dB sensitivity
- Audiophiles who want stunning dynamics and real-world volumes
Placement and set-up
- Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
- Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
- Experiment with toe-in towards the listener for the best stereo imaging
- Thread the four carpet spikes and adjustment thumb wheels into the plinth and level from above with the HEX key provided; use the cups on wooden or delicate floors
In the box
- F703 loudspeaker with magnetic grille
- Gold-plated link wires
- 4 carpet spikes with adjustment thumb wheels
- Floor cups
- HEX key
Connections
- Bi-wire terminal panel: HF and LF terminal pairs with gold-plated binding posts
- Gold-plated link wires for single wiring
- Fifth terminal: earth / ground connection to the driver chassis (optional use)
- Accepts bare wire or 4 mm plugs
Finishes
- Piano Gloss Black
- Piano Gloss White
- Piano Gloss Walnut (high-gloss piano lacquer over walnut veneer)
Fyne Audio F703: frequently asked questions
What amplifier suits the F703?
Fyne Audio recommends 20 - 250 W RMS into the F703's 8 Ω nominal impedance. Power handling is 125 W RMS continuous and 500 W peak, with 94 dB sensitivity (2.83 V/1 m), so it works well even with modest amplifiers.
How close to the wall can the F703 stand?
Ideally no closer than 0.5 m to the rear wall and 1 m to the side walls. Because BassTrax spreads the port output in a 360-degree wavefront, the F700 Series is far less sensitive to room position than traditional hi-fi speakers.
Can the F703 be bi-wired?
Yes. There are separate HF and LF terminal pairs. Use the link wires provided for a single cable, or omit them and wire with two sets of cable or a dedicated bi-wire cable for the best possible sound quality.
What is the fifth terminal for?
It connects to the drive unit chassis so radio frequency interference can be grounded instead of getting back to the amplifier and masking fine detail. A separate earth wire works, but a dedicated screened loudspeaker cable gives the best results.
Should I listen with the grille on or off?
The magnetically attached grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best possible sound quality.
Where can I buy the Fyne Audio F703 in India?
The Fyne Audio F703 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo listening room
Music lovers building a high-end stereo system in a mid to large-sized room.
Connections
| Connect | To |
|---|---|
| Integrated amplifier left speaker output | Left F703 terminals |
| Integrated amplifier right speaker output | Right F703 terminals |
Setup
- Fit the carpet spikes and thumb wheels, place the speakers and level them from above with the HEX key; use the cups on wooden or marble floors.
- Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
- With the amplifier switched off, connect the link wires and wire positive to positive, negative to negative.
- Toe the speakers in towards the listening seat until the stereo image locks in.
- Remove the grilles for the best sound.
Tip: Choose an amplifier in the 20 - 250 W RMS range; the high sensitivity suits low-powered valve and solid-state designs alike.
Workflow 2: Bi-wired system with chassis earth
Listeners who want the last degree of detail from their amplifier and cables.
Connections
| Connect | To |
|---|---|
| Amplifier outputs via two cable sets or a bi-wire cable | F703 HF and LF terminals, link wires omitted |
| Screened cable screen or separate earth wire | F703 earth terminal |
Setup
- Switch the amplifier off.
- Remove the link wires between the HF and LF terminals.
- Wire each channel to the HF and LF pairs with two cable sets or a dedicated bi-wire cable.
- Optionally ground the fifth terminal with a separate earth wire or, best, a screened loudspeaker cable.
- Check every connection for polarity before switching on.
Tip: Grounding the chassis keeps radio frequency interference from masking fine detail.
Workflow 3: Home cinema front pair
Families building a premium living-room or dedicated cinema around an AV receiver.
Connections
| Connect | To |
|---|---|
| TV or projector source with HDMI | AV receiver |
| AV receiver front left / right outputs | F703 pair |
| AV receiver centre output | F57SP-6 or F57SP-8 centre channel |
| AV receiver subwoofer output | Powered subwoofer |
Setup
- Place the F703 pair either side of the screen, toed in towards the main seat.
- Add an F57SP centre channel, voiced and finished to match the F700 Series.
- Wire everything with the receiver switched off.
- Run the receiver's speaker set-up for levels, distances and crossover.
Tip: Matching IsoFlare drivers across the front keeps voices and effects seamless as they pan across the screen.
Workflow 4: Room with limited placement options
Homes where the speakers cannot stand far out into the room.
Connections
| Connect | To |
|---|---|
| Stereo amplifier speaker outputs | F703 pair |
Setup
- Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
- Let the BassTrax diffuser spread the port output in a 360-degree wavefront.
- Play familiar bass-rich music and move the speakers a little at a time until the bass sounds even.
- Fine-tune the toe-in for imaging.
Tip: BassTrax avoids the bass bloom of typical port / room interaction, so placement can follow the room's practical needs.
Workflow 5: Vinyl and streaming system
Listeners who play records and stream high-resolution music.
Connections
| Connect | To |
|---|---|
| Turntable | Amplifier phono input |
| Network streamer | Amplifier line input |
| Amplifier speaker outputs | F703 pair |
Setup
- Keep the turntable on a solid surface away from the speakers.
- Connect the turntable and the streamer to the amplifier.
- Spike the speakers and lock the spikes with the knurled rings so the cabinets stay steady.
- Set the toe-in so vocals sit in the centre between the speakers.
Tip: Clean the piano-lacquer cabinets only with a microfibre cloth and keep them out of long exposure to direct sunlight.
Workflow 6: Living room TV and music system
Homes where one stereo pair serves films and music.
Connections
| Connect | To |
|---|---|
| TV audio output | Amplifier HDMI ARC or optical input (as the amplifier provides) |
| Amplifier speaker outputs | F703 pair |
Setup
- Place a speaker either side of the TV, about 1.5 - 4.5 m apart.
- Connect the TV to the amplifier's matching input.
- Wire the F703 pair to the amplifier.
- Set the TV to send its sound to the external audio output.
Tip: The deep, even bass from BassTrax often makes a separate subwoofer unnecessary for stereo TV sound.








