FYNE AUDIO F703SP product guide and data sheet cover
‹
FYNE AUDIO F703SP product guide and data sheet coverFYNE AUDIO F703SP data sheet page 2: Special Production refinementFYNE AUDIO F703SP data sheet page 3: F1-10 IsoFlare driverFYNE AUDIO F703SP data sheet page 4: Multi-fibre cones and FyneFluteFYNE AUDIO F703SP data sheet page 5: F1-grade aluminium platformFYNE AUDIO F703SP data sheet page 6: Placement and careFYNE AUDIO F703SP data sheet page 7: Crossover and connectionsFYNE AUDIO F703SP data sheet page 8: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F703SP

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: F700SP SERIES

Fyne Audio F703SP: UK hand-built Special Production floorstander with F1-10 10-inch IsoFlare driver, BassTrax, 24 Hz - 26 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2.5-way, downward-firing port with BassTrax Tractrix diffuser, twin cavity loading system
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)24 Hz - 26 kHz
Sensitivity (2.83 V/1 m)94 dB

Power

Recommended amplifier power30 - 250 W RMS
Continuous power handling125 W RMS
Peak power handling500 W

Drivers

IsoFlare point source driver1 × 250 mm: multi-fibre bass / midrange cone, FyneFlute surround, 75 mm titanium dome compression tweeter, neodymium magnet system
Bass driver1 × 250 mm multi-fibre cone, FyneFlute surround

Crossover

Crossover frequency250 Hz and 850 Hz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, cryogenically treated

Physical

Cabinet constructionPressed high-density birch ply with extensive internal bracing
Dimensions (H × W × D)1195 × 505 × 468 mm (47.0 × 19.9 × 18.4 in)
Dimensions includeGrille, terminals and plinth; spikes excluded
Net weight, each56.0 kg (123.5 lb)
S-Trax position (from cabinet front edge)94 mm (3.7 in)
SuperTrax position (from cabinet front edge)70 mm (2.8 in)

Finishes

Finish optionsNatural Walnut, Piano Gloss Walnut, Piano Gloss Black, Piano Gloss White

Versions

F80000673Natural Walnut
F80000671Piano Gloss Black
F80000670Piano Gloss Walnut
F80000672Piano Gloss White

Product overview

The Fyne Audio F703SP is the Special Production evolution of the F703: built in Scotland around a 10-inch (250 mm) IsoFlare driver from the F1-10, with a 3-inch titanium dome compression tweeter on a large neodymium magnet system, a redesigned crossover and an F1-grade aluminium platform.

Designed for audiophiles, the F703SP uses an IsoFlare point source driver from the F1-10 with a large neodymium HF magnet system and a 75 mm (3-inch) titanium dome. The conductive nature of the magnet damps voice-coil inductance losses, for significantly lower distortion and a more consistent frequency response. A second 250 mm bass driver works below 250 Hz, taking the response down to 24 Hz (-6 dB, typical in room) with 94 dB sensitivity.

The F700SP Series gives the F700 models the Special Production treatment, with trickle-down enhancements from the flagship F1 Series and a significant performance improvement over the originals. At the heart of each model is an IsoFlare point source driver: a compression tweeter mounted coaxially in a potent bass / midrange driver with a rigid multi-fibre cone and FyneFlute roll surround, for true isotropic radiation, precise imaging, detailed midrange and quick transients. Massive motor assemblies raise low-frequency sensitivity for the dynamics of high-energy instruments.

The contemporary F700 cabinet is kept: curved panels in high-density birch plywood disperse standing waves and reduce resonance, with a complex twin-cavity tuning system. A substantial downward-firing port feeds the BassTrax Tractrix diffuser, producing a 360-degree bass wavefront that mimics the scale of a large ported speaker without port / room problems and makes the speaker far less dependent on placement. The speaker sits on a heavyweight F1-grade machined aluminium platform with heavy-duty M12 threaded support cones, adjustable from above for precise levelling and optimal floor coupling.

The redesigned crossover circuit topology is optimised by computer modelling and extended listening, with high-grade, low-resonance polypropylene HF capacitors, high-purity internal wiring and upgraded gold-plated terminals. Cryogenic treatment of the complete crossover in Fyne Audio's own facility relaxes stresses in materials, solder joints and cables, and a grounding terminal drains radio frequency interference. The hand-assembled cabinets are finished in piano gloss black, white, lacquered walnut veneer or the new Natural Walnut.

Frequency response (-6 dB, typical in room) 24 Hz - 26 kHz
Sensitivity (2.83 V/1 m) 94 dB
Recommended amplifier power (RMS) 30 - 250 W
IsoFlare point source driver 10-inch

Key features

  • Special Production 2.5-way floorstander, hand built in the UK
  • 250 mm IsoFlare point source driver from the F1-10 with 75 mm titanium dome compression tweeter, neodymium magnet system
  • Large neodymium HF magnet damps voice-coil inductance losses for lower distortion
  • Second 250 mm multi-fibre bass driver with FyneFlute surround and twin-cavity loading
  • BassTrax Tractrix diffuser with a substantial downward-firing port for a 360-degree bass wavefront
  • Redesigned crossover with high-grade low-resonance polypropylene HF capacitors and high-purity internal wiring
  • Complete crossover cryogenically treated in Fyne Audio's own facility
  • Upgraded gold-plated bi-wire terminals with a chassis grounding terminal
  • F1-grade machined aluminium platform with heavy-duty M12 threaded support cones
  • Curved high-density birch-ply cabinet with extensive internal bracing
  • Natural Walnut, Piano Gloss Walnut, Piano Gloss Black or Piano Gloss White

Made for

  • Audiophile listening rooms
  • Large rooms and dedicated home cinemas
  • Low-powered amplifiers, thanks to the 94 dB sensitivity
  • Listeners who want power and dynamic range

Placement and set-up

  • Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
  • Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Thread the spikes and locking wheels into the platform and level from above with the adjustment tool; use the cups on wooden or delicate floors
  • Run in for around 100 hours at normal listening levels

In the box

  • F703SP loudspeakers with magnetic grilles
  • Accessories box: 8 M12 floor-coupling spikes, 8 spike locking wheels, 8 floor protection cups, 1 spike adjustment tool, 4 bi-wire links

Connections

  • Gold-plated bi-wire terminals: separate HF and LF pairs
  • Bi-wire links for single wiring
  • Earth / ground terminal connected to the driver chassis (optional use)
  • Accepts bare wire or 4 mm plugs

Finishes

  • Natural Walnut veneer
  • Piano Gloss Walnut (gloss lacquered walnut veneer)
  • Piano Gloss Black
  • Piano Gloss White

Fyne Audio F703SP: frequently asked questions

How does the F703SP differ from the F703?

It uses the IsoFlare driver from the F1-10, a redesigned and cryogenically treated crossover, higher-grade capacitors and wiring, upgraded gold-plated terminals and an F1-grade aluminium platform with M12 support cones, plus the new Natural Walnut finish.

What amplifier suits the F703SP?

Fyne Audio recommends 30 - 250 W RMS into the 8 Ω nominal impedance. Power handling is 125 W RMS continuous and 500 W peak, with 94 dB sensitivity (2.83 V/1 m).

Can the F703SP be bi-wired?

Yes. Connect the bi-wire links for a single cable, or omit them and use two sets of cable or a dedicated bi-wire cable for the best possible sound quality. The optional earth terminal grounds RF interference; a dedicated screened loudspeaker cable gives the best results.

How long does running in take?

Fyne Audio recommends simply listening at normal levels for around 100 hours for the F700SP models to reach optimum performance.

Should I listen with the grille on or off?

The magnetically attached grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best possible sound quality.

Where can I buy the Fyne Audio F703SP in India?

The Fyne Audio F703SP is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers building a Special Production stereo system in a mid to large-sized room.

Connections

ConnectTo
Integrated amplifier left speaker outputLeft F703SP terminals
Integrated amplifier right speaker outputRight F703SP terminals

Setup

  1. Thread the M12 spikes and locking wheels into the platform, place the speakers and level them from above with the adjustment tool; use the cups on wooden or marble floors.
  2. Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier switched off, connect the bi-wire links and wire positive to positive, negative to negative.
  4. Toe the speakers in towards the listening seat until the stereo image locks in.
  5. Remove the grilles and allow around 100 hours of normal listening to run them in.

Tip: Choose an amplifier in the 30 - 250 W RMS range.

Workflow 2: Bi-wired system with chassis earth

Listeners who want the last degree of detail and transparency.

Connections

ConnectTo
Amplifier outputs via two cable sets or a bi-wire cableF703SP HF and LF terminals, links removed
Screened cable screen or separate earth wireF703SP earth terminal

Setup

  1. Switch the amplifier off.
  2. Remove the bi-wire links.
  3. Wire each channel to the HF and LF pairs with two cable sets or a dedicated bi-wire cable.
  4. Optionally ground the earth terminal with a separate wire or, best, a screened loudspeaker cable.
  5. Check every connection for polarity before switching on.

Tip: Grounding the chassis stops radio frequency interference from reducing fine detail and resolution.

Workflow 3: Premium home cinema front pair

Home theatre owners building a high-end system around an AV processor or receiver.

Connections

ConnectTo
Source with HDMIAV receiver or processor
Front left / right outputsF703SP pair
Centre outputF57SP-6 or F57SP-8 centre channel
Subwoofer outputPowered subwoofer

Setup

  1. Place the F703SP pair either side of the screen, toed in towards the main seat.
  2. Add an F57SP centre channel, designed to integrate with the F700-based models.
  3. Wire everything with the receiver switched off.
  4. Run the receiver's speaker set-up for levels, distances and crossover.

Tip: IsoFlare point source drivers across the front keep voices and effects seamless as they pan across the screen.

Workflow 4: Room with limited placement options

Homes where the speakers cannot stand far out into the room.

Connections

ConnectTo
Amplifier speaker outputsF703SP pair

Setup

  1. Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
  2. Let BassTrax spread the port output in a 360-degree wavefront.
  3. Move the speakers a little at a time with familiar bass-rich music until the bass sounds even.
  4. Fine-tune the toe-in for imaging.

Tip: BassTrax makes the F700SP models far less dependent on placement than conventional ported speakers.

Workflow 5: Vinyl and high-resolution streaming

Listeners who play records and stream high-resolution music.

Connections

ConnectTo
TurntableAmplifier phono input
Network streamerAmplifier line input
Amplifier speaker outputsF703SP pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect the turntable and the streamer to the amplifier.
  3. Level the speakers on their M12 support cones so they stand firm.
  4. Set the toe-in so vocals sit centrally between the speakers.

Tip: Clean the cabinets only with a microfibre cloth; never use solvents or abrasives, and avoid long exposure to direct sunlight.

Workflow 6: Upgrade from an F700 Series pair

Owners of the F703 moving up to Special Production.

Connections

ConnectTo
Existing amplifier speaker outputsF703SP pair

Setup

  1. Place the F703SP where the F703 stood; the cabinet design is the same F700 shape.
  2. Wire it as before, single-wired with the links or bi-wired.
  3. Allow around 100 hours of running in.
  4. Re-check toe-in and spacing after running in.

Tip: Choose the new Natural Walnut finish if you want the classic look of Fyne Audio's Vintage models.

Request a Quote

FYNE AUDIO F703SP

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›