FYNE AUDIO F704 product guide and data sheet cover
‹
FYNE AUDIO F704 product guide and data sheet coverFYNE AUDIO F704 data sheet page 2: Elegant, refined and powerfulFYNE AUDIO F704 data sheet page 3: IsoFlare driver and multi-fibre conesFYNE AUDIO F704 data sheet page 4: BassTrax and the aluminium plinthFYNE AUDIO F704 data sheet page 5: Crossover and connectionsFYNE AUDIO F704 data sheet page 6: Placement and careFYNE AUDIO F704 data sheet page 7: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO F704

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: F700 SERIES

Fyne Audio F704: UK-built 2.5-way floorstander with 12-inch IsoFlare point source driver, BassTrax diffuser, 24 Hz - 26 kHz, 96 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2.5-way, downward-firing port with BassTrax Tractrix diffuser, twin cavity loading system
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)24 Hz - 26 kHz
Sensitivity (2.83 V/1 m)96 dB

Power

Recommended amplifier power20 - 300 W RMS
Continuous power handling150 W RMS
Peak power handling600 W

Drivers

IsoFlare point source driver1 × 300 mm: multi-fibre bass / midrange cone, FyneFlute surround, 75 mm titanium dome compression tweeter, ferrite magnet system
Bass driver1 × 300 mm multi-fibre cone, FyneFlute surround

Crossover

Crossover frequency200 Hz and 900 Hz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated

Physical

Cabinet constructionPressed high-density birch ply with extensive internal bracing
Dimensions (H × W × D)1339 × 540 × 561 mm (52.7 × 21.3 × 22.1 in)
Dimensions includeGrille, terminals and plinth; spikes excluded
Net weight, each67.7 kg (149.3 lb)
S-Trax position (from cabinet front edge)119 mm (4.7 in)
SuperTrax position (from cabinet front edge)95 mm (3.7 in)

Finishes

Finish optionsPiano Gloss Black, Piano Gloss White, Piano Gloss Walnut

Versions

F80000221Piano Gloss Black
F80000220Piano Gloss Walnut
F80000222Piano Gloss White

Product overview

The Fyne Audio F704 is the flagship of the UK-built F700 Series: a 2.5-way floorstanding loudspeaker with a 12-inch (300 mm) IsoFlare point source driver and a 12-inch multi-fibre bass driver in a twin-cavity tuned cabinet with BassTrax.

Using trickle-down technology from the F1 Series, the F704 delivers stunning dynamics for a truly captivating hi-fi experience. Its 300 mm IsoFlare driver uses a 75 mm titanium dome compression tweeter with a ferrite magnet system, crossing over at 900 Hz, and the 300 mm bass driver works below 200 Hz. Sensitivity is a very high 96 dB and the response reaches 24 Hz (-6 dB, typical in room).

IsoFlare point source drivers are at the heart of every F700 model. A compression tweeter is mounted coaxially at the heart of a potent bass / midrange driver with a rigid multi-fibre cone and a FyneFlute roll surround, so sound radiates isotropically from a single point for precise imaging and an even frequency response. The massive bass motor includes a flux focusing magnet for higher low-frequency sensitivity.

The cabinet is handcrafted from high-density birch plywood, chosen for its very low colouration, with a sculpted shape whose curved panels diffuse standing waves and extensive internal bracing, plus a twin-cavity tuning system. Below it, Fyne Audio's BassTrax system feeds a large downward-firing port onto a Tractrix profile diffuser cone on the machined aluminium plinth, creating a true 360-degree bass wavefront. The result is the depth and scale of a large ported speaker without the bass bloom of typical port / room interaction, and far less sensitivity to room position.

The crossover combines low-loss inductors, high-grade capacitors and high-purity silver-plated internal wiring treated by Fyne Audio's Cryo-Lite super-freezing and slow-thawing process for a clean, transparent signal path. The bi-wire terminal panel has premium gold-plated binding posts and gold-plated link cables, plus a fifth terminal for grounding the driver chassis against radio frequency interference. Each speaker is built in the UK and finished in high-gloss piano lacquer.

Frequency response (-6 dB, typical in room) 24 Hz - 26 kHz
Sensitivity (2.83 V/1 m) 96 dB
Recommended amplifier power (RMS) 20 - 300 W
IsoFlare point source driver 12-inch

Key features

  • UK-built 2.5-way floorstanding loudspeaker with trickle-down technology from the flagship F1 Series
  • 300 mm IsoFlare point source driver with 75 mm titanium dome compression tweeter at its centre
  • Additional 300 mm multi-fibre bass driver with FyneFlute surround and twin-cavity loading
  • BassTrax Tractrix diffuser under a large downward-firing port for a 360-degree bass wavefront
  • Multi-fibre cones, FyneFlute roll surrounds and flux focusing magnet
  • Sculpted, curved cabinet in high-density birch plywood with extensive internal bracing
  • Crossover with low-loss inductors, high-grade capacitors and Cryo-Lite treated silver-plated wiring
  • Bi-wire terminals with gold-plated binding posts and link cables, plus a chassis earth terminal
  • Machined aluminium plinth of twin 8 mm plates with spikes, large knurled lock rings and aluminium cups
  • Magnetically attached grille
  • High-gloss piano lacquer in black, white or walnut veneer

Made for

  • Large listening rooms and dedicated cinemas
  • Low-powered amplifiers, thanks to the 96 dB sensitivity
  • Front channels of a reference home theatre
  • Listeners who want the flagship of the F700 Series

Placement and set-up

  • Stereo: about 1.5 - 4.5 m (5 - 15 ft) apart
  • Ideally no closer than 0.5 m (20 in) to the rear wall and 1 m (3 ft) to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Thread the four carpet spikes and adjustment thumb wheels into the plinth and level from above with the HEX key provided; use the cups on wooden or delicate floors

In the box

  • F704 loudspeaker with magnetic grille
  • Gold-plated link wires
  • 4 carpet spikes with adjustment thumb wheels
  • Floor cups
  • HEX key

Connections

  • Bi-wire terminal panel: HF and LF terminal pairs with gold-plated binding posts
  • Gold-plated link wires for single wiring
  • Fifth terminal: earth / ground connection to the driver chassis (optional use)
  • Accepts bare wire or 4 mm plugs

Finishes

  • Piano Gloss Black
  • Piano Gloss White
  • Piano Gloss Walnut (high-gloss piano lacquer over walnut veneer)

Fyne Audio F704: frequently asked questions

What amplifier suits the F704?

Fyne Audio recommends 20 - 300 W RMS into the F704's 8 Ω nominal impedance. Power handling is 150 W RMS continuous and 600 W peak, with 96 dB sensitivity (2.83 V/1 m), so it works well even with modest amplifiers.

How close to the wall can the F704 stand?

Ideally no closer than 0.5 m to the rear wall and 1 m to the side walls. Because BassTrax spreads the port output in a 360-degree wavefront, the F700 Series is far less sensitive to room position than traditional hi-fi speakers.

Can the F704 be bi-wired?

Yes. There are separate HF and LF terminal pairs. Use the link wires provided for a single cable, or omit them and wire with two sets of cable or a dedicated bi-wire cable for the best possible sound quality.

What is the fifth terminal for?

It connects to the drive unit chassis so radio frequency interference can be grounded instead of getting back to the amplifier and masking fine detail. A separate earth wire works, but a dedicated screened loudspeaker cable gives the best results.

Should I listen with the grille on or off?

The magnetically attached grille is designed for maximum transparency, but Fyne Audio recommends removing it for the best possible sound quality.

Where can I buy the Fyne Audio F704 in India?

The Fyne Audio F704 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers building a high-end stereo system in a mid to large-sized room.

Connections

ConnectTo
Integrated amplifier left speaker outputLeft F704 terminals
Integrated amplifier right speaker outputRight F704 terminals

Setup

  1. Fit the carpet spikes and thumb wheels, place the speakers and level them from above with the HEX key; use the cups on wooden or marble floors.
  2. Set the speakers about 1.5 - 4.5 m apart, ideally 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier switched off, connect the link wires and wire positive to positive, negative to negative.
  4. Toe the speakers in towards the listening seat until the stereo image locks in.
  5. Remove the grilles for the best sound.

Tip: Choose an amplifier in the 20 - 300 W RMS range; the high sensitivity suits low-powered valve and solid-state designs alike.

Workflow 2: Bi-wired system with chassis earth

Listeners who want the last degree of detail from their amplifier and cables.

Connections

ConnectTo
Amplifier outputs via two cable sets or a bi-wire cableF704 HF and LF terminals, link wires omitted
Screened cable screen or separate earth wireF704 earth terminal

Setup

  1. Switch the amplifier off.
  2. Remove the link wires between the HF and LF terminals.
  3. Wire each channel to the HF and LF pairs with two cable sets or a dedicated bi-wire cable.
  4. Optionally ground the fifth terminal with a separate earth wire or, best, a screened loudspeaker cable.
  5. Check every connection for polarity before switching on.

Tip: Grounding the chassis keeps radio frequency interference from masking fine detail.

Workflow 3: Home cinema front pair

Families building a premium living-room or dedicated cinema around an AV receiver.

Connections

ConnectTo
TV or projector source with HDMIAV receiver
AV receiver front left / right outputsF704 pair
AV receiver centre outputF57SP-6 or F57SP-8 centre channel
AV receiver subwoofer outputPowered subwoofer

Setup

  1. Place the F704 pair either side of the screen, toed in towards the main seat.
  2. Add an F57SP centre channel, voiced and finished to match the F700 Series.
  3. Wire everything with the receiver switched off.
  4. Run the receiver's speaker set-up for levels, distances and crossover.

Tip: Matching IsoFlare drivers across the front keeps voices and effects seamless as they pan across the screen.

Workflow 4: Room with limited placement options

Homes where the speakers cannot stand far out into the room.

Connections

ConnectTo
Stereo amplifier speaker outputsF704 pair

Setup

  1. Place the speakers as far from the walls as the room allows, ideally at least 0.5 m from the rear wall.
  2. Let the BassTrax diffuser spread the port output in a 360-degree wavefront.
  3. Play familiar bass-rich music and move the speakers a little at a time until the bass sounds even.
  4. Fine-tune the toe-in for imaging.

Tip: BassTrax avoids the bass bloom of typical port / room interaction, so placement can follow the room's practical needs.

Workflow 5: Vinyl and streaming system

Listeners who play records and stream high-resolution music.

Connections

ConnectTo
TurntableAmplifier phono input
Network streamerAmplifier line input
Amplifier speaker outputsF704 pair

Setup

  1. Keep the turntable on a solid surface away from the speakers.
  2. Connect the turntable and the streamer to the amplifier.
  3. Spike the speakers and lock the spikes with the knurled rings so the cabinets stay steady.
  4. Set the toe-in so vocals sit in the centre between the speakers.

Tip: Clean the piano-lacquer cabinets only with a microfibre cloth and keep them out of long exposure to direct sunlight.

Workflow 6: Living room TV and music system

Homes where one stereo pair serves films and music.

Connections

ConnectTo
TV audio outputAmplifier HDMI ARC or optical input (as the amplifier provides)
Amplifier speaker outputsF704 pair

Setup

  1. Place a speaker either side of the TV, about 1.5 - 4.5 m apart.
  2. Connect the TV to the amplifier's matching input.
  3. Wire the F704 pair to the amplifier.
  4. Set the TV to send its sound to the external audio output.

Tip: The deep, even bass from BassTrax often makes a separate subwoofer unnecessary for stereo TV sound.

Request a Quote

FYNE AUDIO F704

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›