FYNE AUDIO Vintage Classic Gold VIII SP product guide and data sheet cover
‹
FYNE AUDIO Vintage Classic Gold VIII SP product guide and data sheet coverFYNE AUDIO Vintage Classic Gold VIII SP data sheet page 2: Vintage performance, classic styleFYNE AUDIO Vintage Classic Gold VIII SP data sheet page 3: Upgraded IsoFlare driverFYNE AUDIO Vintage Classic Gold VIII SP data sheet page 4: Energy and PresenceFYNE AUDIO Vintage Classic Gold VIII SP data sheet page 5: Bi-wire, bi-amp and earthFYNE AUDIO Vintage Classic Gold VIII SP data sheet page 6: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO Vintage Classic Gold VIII SP

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: VINTAGE CLASSIC GOLD SP SERIES

Fyne Audio Vintage Classic Gold VIII SP: retro 2-way floorstander, upgraded 8-inch IsoFlare driver, twin-cavity BassTrax, 30 Hz - 34 kHz, 91 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port, twin cavity, BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)30 Hz - 34 kHz
Sensitivity (2.83 V/1 m)91 dB

Power

Recommended amplifier power30 - 200 W RMS
Continuous power handling100 W RMS

Drivers

Drive unit complement1 × 200 mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, ferrite magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Full Cryo Treatment
System adjustmentsHigh frequency energy (1.8 kHz - 34 kHz) ±3 dB; Presence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)873 × 380 × 300 mm (34.4 × 15.0 × 11.8 in)
Dimensions includePlinth, terminals and grille; spikes excluded
Net weight, each26.3 kg
Cabinet constructionHigh density birch ply with extensive internal bracing
TerminalsBi-wire, gold plated, with earth terminal
GrilleMagnetic, acoustically transparent cloth
S-Trax position (from cabinet front edge)79 mm (3.1 in)
SuperTrax position (from cabinet front edge)55 mm (2.2 in)

Finishes

FinishWalnut

Product overview

The Fyne Audio Vintage Classic Gold VIII SP is a premium 2-way floorstanding loudspeaker from the Vintage Classic Gold SP Series, combining a retro rectangular walnut cabinet with gold-anodised trim, an upgraded 200 mm (8-inch) IsoFlare point source driver and the patented twin-cavity BassTrax Tractrix diffuser.

The Vintage Classic Gold VIII SP is a premium 2-way loudspeaker that combines timeless retro design with advanced engineering. Its 200 mm (8-inch) IsoFlare point source driver, a multi-fibre bass / midrange cone with a 25 mm magnesium dome tweeter at its centre, gives rich, detailed sound from 30 Hz to 34 kHz with precise imaging even off axis, while the BassTrax Tractrix diffuser adds deep, controlled bass from a hand-crafted, real-wood-veneered birch ply cabinet.

The Gold SP (Special Production) Series bridges the vintage look of the Vintage Classic Series and the performance of the flagship Vintage Series. It keeps the iconic rectangular cabinet but upgrades it to high-density birch ply, and adds upgraded IsoFlare drivers, redesigned crossovers, better internal wiring, gold-plated high-purity copper terminals and a more acoustically transparent grille cloth, all made at Fyne Audio's factory in Scotland.

In the IsoFlare driver the multi-fibre bass / midrange cone shares a common centre with the compression tweeter, so sound radiates isotropically with constant directivity and precise imaging even off axis. The 25 mm magnesium dome tweeter uses a ferrite magnet system for a smooth, extended response, following the same design principles as the larger models, and crosses over at 1.8 kHz. A FyneFlute surround terminates cone energy without time smearing, the high-power ferrite LF motor uses a copper shorting ring that cuts midrange distortion tenfold, and the driver sits on a rigid cast aluminium chassis.

Twin-cavity reflex loading broadens the tuning frequency, reduces cone excursion and blocks standing waves, and the port fires downwards onto the BassTrax Tractrix diffuser hidden beneath the grille cloth at the base, spreading bass in a 360-degree wavefront. The bi-wired crossover is computer optimised, tuned by ear, hand wired on fibreboard panels with polypropylene capacitors, laminated iron core inductors, precision resistors and PC-OCC wiring, and cryogenically treated in house. An earth terminal and front Energy and Presence controls (each ±3 dB) complete the package.

Frequency response (-6 dB, typical in room) 30 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 91 dB
Recommended amplifier power (RMS) 30 - 200 W
IsoFlare point source driver 8-inch

Key features

  • Gold SP (Special Production) 2-way floorstander with 1970s-inspired styling
  • Upgraded 200 mm IsoFlare point source driver with multi-fibre cone and FyneFlute surround
  • 25 mm magnesium dome compression tweeter with ferrite magnet system
  • Twin-cavity BassTrax Tractrix diffuser for 360-degree bass and easy placement
  • Redesigned bi-wired crossover at 1.8 kHz, cryogenically treated in house
  • Gold-plated high-purity copper bi-wire terminals and PC-OCC internal wiring
  • Front Energy and Presence controls, each ±3 dB
  • Earth terminal against radio frequency interference
  • High-density birch ply cabinet with extensive internal bracing, walnut veneer and gold-anodised metalwork
  • More acoustically transparent magnetic grille, storable on the rear

Made for

  • Stereo music systems in small and medium rooms
  • Valve and solid-state amplifiers alike
  • Bi-wired and bi-amplified systems
  • Listeners who love classic hi-fi looks with high-end performance
  • Rooms where speakers must stand nearer the walls, thanks to BassTrax

Placement and set-up

  • Unpack and position with the help of an assistant
  • Stereo: about 1.5 - 4.5 m apart, at least 0.5 m from the rear wall and 1 m from the side walls
  • Toe the cabinets in towards the listening position to focus the image
  • Fit the four M12 spikes and locking wheels, level the speaker and tighten the wheels; use the cups on wooden floors
  • Start Energy and Presence at the centre, then make small adjustments
  • Run in for around 100 hours at normal listening levels

In the box

  • Vintage Classic Gold VIII SP loudspeakers with magnetic grilles
  • Accessories box: 8 × M12 floor coupling spikes, 8 spike locking wheels, 8 floor protection cups, 4 bi-wire links

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Walnut veneer with gold-anodised metalwork

Fyne Audio Vintage Classic Gold VIII SP: frequently asked questions

What amplifier suits the Vintage Classic Gold VIII SP?

Fyne Audio recommends 30 - 200 W RMS into its 8 Ω nominal impedance; continuous power handling is 100 W RMS. With 91 dB sensitivity (2.83 V/1 m) it also suits lower-power valve amplifiers, which will simply limit the maximum volume in large rooms.

How is Gold SP different from the Vintage Classic Series?

Gold SP keeps the rectangular retro cabinet but upgrades it to high-density birch ply, and adds upgraded IsoFlare drivers, redesigned crossovers, better internal wiring and terminals, twin-cavity BassTrax and a more transparent grille cloth.

Can it be bi-wired or bi-amped?

Yes. Use the supplied links for single wire (best connected to the HF terminals), remove them for bi-wire with two cable sets or a bi-wire cable, or remove them and drive the LF and HF sections from separate amplifiers.

Can I listen with the grilles on?

The Gold SP grille cloth is more acoustically transparent for listeners who prefer to keep it fitted, though Fyne Audio recommends removing it for the best sound. It can be stored magnetically on the rear of the cabinet.

How long does running in take?

Fyne Audio recommends around 100 hours of listening at normal levels for the speakers to reach optimum performance.

Where can I buy the Fyne Audio Vintage Classic Gold VIII SP in India?

The Fyne Audio Vintage Classic Gold VIII SP is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers building a high-end two-channel system.

Connections

ConnectTo
Integrated amplifier left / right speaker outputsGold VIII SP HF terminals (links fitted)
Amplifier ground terminalEarth terminal (optional)

Setup

  1. With an assistant, lift each speaker off its foam cushions and fit the four M12 spikes and locking wheels.
  2. Place the speakers about 1.5 - 4.5 m apart, at least 0.5 m from the rear wall and 1 m from the side walls; level them and tighten the wheels.
  3. With the amplifier off, connect to the HF terminals with the bi-wire links fitted.
  4. Toe the speakers in towards the listening seat until the image focuses.
  5. Set Energy and Presence to the centre and adjust in small steps.

Tip: Choose an amplifier in the 30 - 200 W RMS range and allow around 100 hours for running in.

Workflow 2: Bi-wired system

Listeners getting the most from one stereo amplifier.

Connections

ConnectTo
Amplifier left outputLeft speaker HF and LF terminals
Amplifier right outputRight speaker HF and LF terminals

Setup

  1. Switch the amplifier off and remove the bi-wire links.
  2. Run two sets of cable, or a dedicated bi-wire cable, to the HF and LF terminals.
  3. Terminate with good 4 mm banana plugs or spades.
  4. Check polarity at every terminal.

Tip: Fyne Audio states that bi-wiring gives the best possible sound quality.

Workflow 3: Bi-amplified system

Enthusiasts with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
PreamplifierLF and HF power amplifiers
LF power amplifierLF terminals of both speakers
HF power amplifierHF terminals of both speakers

Setup

  1. Remove the bi-wire links: they must not be fitted when bi-amping.
  2. Use one stereo amplifier for both LF sections and the other for both HF sections.
  3. Match the amplifier gains.
  4. Run an earth wire or screened cable to the earth terminals if radio interference is present.

Tip: Leaving the links in place while bi-amping can damage the amplifiers.

Workflow 4: Valve amplifier and vinyl system

Owners of valve amplifiers and turntables who want matching classic looks.

Connections

ConnectTo
TurntablePhono input or phono preamplifier
Valve amplifier 8 Ω outputsGold VIII SP terminals (links fitted)

Setup

  1. Connect the turntable through a phono stage to the amplifier.
  2. Wire the amplifier to the speakers with the links fitted.
  3. Make use of the 91 dB (2.83 V/1 m) sensitivity for good levels from modest power.
  4. Fine-tune Presence for vocal clarity and image depth.

Tip: Powers below the recommended minimum will not damage the speakers; they limit maximum volume and dynamic range.

Workflow 5: Home cinema front pair

Living rooms and cinema rooms where films and music share one system.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front left / right outputsGold VIII SP pair
AV receiver subwoofer outputPowered subwoofer (optional)

Setup

  1. Stand the pair either side of the screen, toed in towards the main seat.
  2. Connect them to the receiver's front left and right outputs.
  3. Run the receiver's speaker set-up for levels and distances.
  4. Use the Energy control to balance the treble against the room.

Tip: BassTrax spreads bass evenly, so the speakers blend well even near the screen wall.

Workflow 6: Adding super tweeters

Gold VIII SP owners extending the system with Fyne Audio's add-on super tweeters.

Connections

ConnectTo
Speaker terminalsS-Trax or SuperTrax input

Setup

  1. Place an S-Trax on top of each cabinet 79 mm from the front edge, or a SuperTrax 55 mm from the front edge.
  2. Connect the super tweeter as described in its own manual.
  3. Set its level by ear with familiar recordings.
  4. Dust the cabinets with a lint-free cloth such as muslin; never use solvents or abrasives.

Tip: These front-edge positions are published by Fyne Audio for this model.

Request a Quote

FYNE AUDIO Vintage Classic Gold VIII SP

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›