FYNE AUDIO Vintage Classic VIII product guide and data sheet cover
‹
FYNE AUDIO Vintage Classic VIII product guide and data sheet coverFYNE AUDIO Vintage Classic VIII data sheet page 2: Back in the day never sounded so goodFYNE AUDIO Vintage Classic VIII data sheet page 3: IsoFlare point source driverFYNE AUDIO Vintage Classic VIII data sheet page 4: Energy and Presence controlsFYNE AUDIO Vintage Classic VIII data sheet page 5: Bi-wire, bi-amp and earthFYNE AUDIO Vintage Classic VIII data sheet page 6: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO Vintage Classic VIII

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: VINTAGE CLASSIC SERIES

Fyne Audio Vintage Classic VIII: 1970s-style 2-way floorstanding speaker with 8-inch IsoFlare driver, BassTrax, 30 Hz - 34 kHz, 91 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port, twin cavity, BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)30 Hz - 34 kHz
Sensitivity (2.83 V/1 m)91 dB

Power

Recommended amplifier power30 - 200 W RMS
Continuous power handling100 W RMS
Peak power handling400 W

Drivers

Drive unit complement1 × 200 mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround, 25 mm magnesium dome compression tweeter, ferrite magnet system

Crossover

Crossover frequency1.8 kHz
Crossover typeBi-wired passive low loss, 2nd order low pass, 1st order high pass, Cryo-Lite treated
System adjustmentsHigh frequency energy (1.8 kHz - 34 kHz) ±3 dB; Presence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)873 × 380 × 300 mm (34.4 × 15.0 × 11.8 in)
Dimensions includeGrille and terminals and plinth; spikes excluded
Net weight, each29.1 kg
Cabinet constructionHigh density fibreboard, walnut veneered, with extensive internal bracing
TerminalsBi-wire, with earth terminal
GrilleWood-framed woven cloth, magnetic
S-Trax position (from cabinet front edge)74 mm (2.9 in)
SuperTrax position (from cabinet front edge)50 mm (2.0 in)

Finishes

FinishWalnut

Product overview

The Fyne Audio Vintage Classic VIII is a 2-way floorstanding loudspeaker from the Vintage Classic Series, pairing 1970s-style looks (walnut veneer, black baffle, gold trim and analogue control knobs) with a 200 mm (8-inch) IsoFlare point source driver and the patented BassTrax Tractrix diffuser.

Tall, slim and elegant, the Vintage Classic VIII builds on the SM version with a larger floorstanding cabinet for a fuller, richer and more engaging sound. Its 200 mm (8-inch) Vintage Classic IsoFlare driver with FyneFlute roll surround and proven 25 mm magnesium dome compression tweeter works with a smaller form-factor BassTrax porting system that delivers remarkable bass from a relatively compact cabinet.

The IsoFlare driver is a point source: the multi-fibre bass / midrange cone shares a common centre with the compression tweeter, so sound radiates isotropically with no nodes or lobes, and stereo imaging stays precisely focused on and off axis. The 25 mm magnesium dome compression tweeter uses a ferrite magnet system and crosses over at 1.8 kHz. A FyneFlute roll surround dissipates cone energy at the outer edge, and the driver is built on a rigid cast aluminium chassis coupled to the internal bracing through damping material.

BassTrax, slightly simplified for the Vintage Classic Series, ports the cabinet vertically at the base onto a mathematically shaped Tractrix diffuser cone. The bass leaves as a 360-degree wavefront through vents on all four sides, concealed behind grille cloth that wraps round the plinth. Bass is deep, articulate and tuneful, and the Classic VIII can stand nearer to side and rear walls than a conventional front or rear ported design.

The hand-built crossover is computer modelled, tuned by ear and hard wired on vibration-damping fibreboard, with low-loss laminated core inductors, precision resistors, polypropylene capacitors and silver-plated crystal OFC wiring, then Cryo-Lite treated (frozen to -170 °C and slowly thawed) to relieve micro-stresses. Bi-wire terminals allow single-wire, bi-wire or bi-amp connection, and an earth terminal grounds the driver chassis against radio frequency interference. On the baffle, weighted Energy and Presence knobs (each ±3 dB) sit on a gold panel printed with frequency response graphs.

The rectangular cabinet, wider than it is deep, is thick high-density fibreboard with a unique bracing structure, veneered in real walnut. The wood-framed grille uses a woven cloth whose colour and pattern were inspired by Scottish kilt fabrics, and attaches with hidden magnets to the front, or to the back for storage. Designed by Fyne Audio's engineers in Scotland, the Vintage Classic VIII suits music lovers who want classic style with modern sound.

Frequency response (-6 dB, typical in room) 30 Hz - 34 kHz
Sensitivity (2.83 V/1 m) 91 dB
Recommended amplifier power (RMS) 30 - 200 W
IsoFlare point source driver 8-inch

Key features

  • 2-way floorstanding loudspeaker with 1970s-inspired styling
  • 200 mm IsoFlare point source driver with multi-fibre cone and FyneFlute roll surround
  • 25 mm magnesium dome compression tweeter with ferrite magnet system
  • BassTrax Tractrix diffuser with 360-degree bass venting on all four sides
  • Hand-built crossover at 1.8 kHz, Cryo-Lite treated
  • Front-panel Energy and Presence knobs, each ±3 dB
  • Bi-wire terminals for single-wire, bi-wire or bi-amp connection, plus an earth terminal
  • High-density fibreboard cabinet with extensive internal bracing and real walnut veneer
  • Black baffle with anodised gold trim and frequency-graph control panel
  • Wood-framed woven-cloth grille with hidden magnets, storable on the rear

Made for

  • Stereo music systems in medium rooms
  • Valve and solid-state amplifiers alike
  • Bi-wired and bi-amplified systems
  • Listeners who love classic hi-fi looks
  • Rooms where the speakers must stand nearer the walls, thanks to BassTrax

Placement and set-up

  • Stereo: about 1.5 - 4.5 m apart
  • At least 0.5 m from the rear wall and no closer than 1 m to the side walls
  • Experiment with toe-in towards the listener for the best stereo imaging
  • Fit the four M8 spikes and locking wheels, level the speaker and lock the wheels; use the cups on wooden floors
  • Start Energy and Presence at the centre, then make small adjustments
  • Remove the grilles for critical listening and store them magnetically on the rear

In the box

  • Vintage Classic VIII loudspeakers with magnetic woven-cloth grilles
  • Accessories box: 8 × M8 floor coupling spikes, 8 spike locking wheels, 8 floor protection cups, 4 bi-wire links

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Walnut veneer with black baffle and gold trim

Fyne Audio Vintage Classic VIII: frequently asked questions

What amplifier suits the Vintage Classic VIII?

Fyne Audio recommends 30 - 200 W RMS into its 8 Ω nominal impedance; continuous power handling is 100 W RMS and peak power handling 400 W. With 91 dB sensitivity (2.83 V/1 m) it also suits lower-power valve amplifiers, which will simply limit maximum volume in large rooms.

Can it be bi-wired or bi-amped?

Yes. It has separate HF and LF terminals. Use the supplied links for single wire (best connected to the HF terminals), remove them for bi-wire with two cable sets or a bi-wire cable, or remove them and drive each section from its own amplifier.

What do the Energy and Presence knobs do?

Energy sets the tweeter level from the 1.8 kHz crossover upwards and controls how bright the sound is. Presence affects only 2.5 - 5.0 kHz, changing articulation, vocal clarity and image depth. Each gives ±3 dB; start both at the centre.

How close to the wall can it stand?

Ideally at least 0.5 m from the rear wall and 1 m from the side walls. Because BassTrax spreads bass evenly all round the cabinet, it is less sensitive to boundaries than a conventional front or rear ported speaker.

Should I listen with the grilles on?

The magnetic grilles are designed for maximum transparency, but Fyne Audio recommends removing them for the best sound. They can be stored magnetically on the rear of the cabinet.

Where can I buy the Fyne Audio Vintage Classic VIII in India?

The Fyne Audio Vintage Classic VIII is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers building a two-channel system around an integrated amplifier.

Connections

ConnectTo
Integrated amplifier left / right speaker outputsClassic VIII HF terminals (links fitted)
Amplifier ground terminalEarth terminal (optional)

Setup

  1. Fit the four M8 spikes and locking wheels, level each speaker and lock the wheels; use the cups on wooden or marble floors.
  2. Place the speakers about 1.5 - 4.5 m apart, at least 0.5 m from the rear wall and 1 m from the side walls.
  3. With the amplifier off, connect to the HF terminals with the bi-wire links fitted.
  4. Toe the speakers in towards the listening seat until the image focuses.
  5. Remove the grilles for critical listening and store them on the rear.

Tip: Choose an amplifier in the 30 - 200 W RMS range.

Workflow 2: Bi-wired system

Listeners getting the most from one stereo amplifier.

Connections

ConnectTo
Amplifier left outputLeft speaker HF and LF terminals
Amplifier right outputRight speaker HF and LF terminals

Setup

  1. Switch the amplifier off and remove the bi-wire links.
  2. Run two sets of cable, or a dedicated bi-wire cable, to the HF and LF terminals.
  3. Terminate with good 4 mm banana plugs or spades.
  4. Check polarity at every terminal.

Tip: Fyne Audio states that bi-wiring gives the best possible sound quality.

Workflow 3: Vintage valve system

Owners of valve (tube) amplifiers who want a matching classic look.

Connections

ConnectTo
Valve amplifier 8 Ω outputsSpeaker terminals (links fitted)
TurntableAmplifier phono input or phono preamplifier

Setup

  1. Connect the turntable through a phono stage to the amplifier.
  2. Wire the amplifier to the speakers with the links fitted.
  3. Make use of the 91 dB (2.83 V/1 m) sensitivity for good levels from modest power.
  4. Fine-tune Presence for vocal clarity and image depth.

Tip: Amplifiers below the recommended minimum power will not damage the speakers; they limit maximum volume and dynamic range.

Workflow 4: Home cinema front pair

Living rooms where films and music share one system.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front left / right outputsClassic VIII pair
AV receiver subwoofer outputPowered subwoofer (optional)

Setup

  1. Stand the pair either side of the TV, toed in towards the main seat.
  2. Connect them to the receiver's front left and right outputs.
  3. Run the receiver's speaker set-up for levels and distances.
  4. Use the Energy control to balance the treble against the room's furnishings.

Tip: BassTrax spreads bass evenly, so the speakers blend well even when placed near the TV wall.

Workflow 5: Bi-amplified system

Enthusiasts with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
PreamplifierLF and HF power amplifiers
LF power amplifierLF terminals of both speakers
HF power amplifierHF terminals of both speakers

Setup

  1. Remove the bi-wire links: they must not be fitted when bi-amping.
  2. Use one stereo amplifier for the LF sections and the other for the HF sections.
  3. Match the amplifier gains.
  4. Run an earth wire or screened cable to the earth terminals if radio interference is present.

Tip: Leaving the links in place while bi-amping can damage the amplifiers.

Workflow 6: Adding super tweeters

Classic VIII owners extending the system with Fyne Audio's add-on super tweeters.

Connections

ConnectTo
Speaker terminalsS-Trax or SuperTrax input

Setup

  1. Place an S-Trax on top of each cabinet 74 mm from the front edge, or a SuperTrax 50 mm from the front edge.
  2. Connect the super tweeter as described in its own manual.
  3. Set its level by ear with familiar recordings.
  4. Clean the cabinet with a microfibre cloth, never with solvents or abrasives.

Tip: Fyne Audio publishes these front-edge positions so each super tweeter lines up correctly with this model.

Request a Quote

FYNE AUDIO Vintage Classic VIII

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›