FYNE AUDIO Vintage Ten product guide and data sheet cover
‹
FYNE AUDIO Vintage Ten product guide and data sheet coverFYNE AUDIO Vintage Ten data sheet page 2: Back in the day never sounded so goodFYNE AUDIO Vintage Ten data sheet page 3: Latest IsoFlare driverFYNE AUDIO Vintage Ten data sheet page 4: BassTrax in its most advanced formFYNE AUDIO Vintage Ten data sheet page 5: Energy and PresenceFYNE AUDIO Vintage Ten data sheet page 6: Connections and specifications
›

Brand: FYNE AUDIO

FYNE AUDIO Vintage Ten

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: VINTAGE SERIES

Fyne Audio Vintage Ten: hand-built walnut floorstander, 10-inch IsoFlare driver, twin-cavity BassTrax, 26 Hz - 26 kHz, 94 dB. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2-way, downward-firing port with BassTrax Tractrix diffuser
Nominal impedance8 Ω
Frequency response (-6 dB, typical in room)26 Hz - 26 kHz
Sensitivity (2.83 V/1 m)94 dB

Power

Recommended amplifier power20 - 280 W RMS
Continuous power handling140 W RMS
Peak power handling560 W

Drivers

Drive unit complement1 × 250 mm IsoFlare point source driver, multi-fibre bass / midrange cone, 75 mm titanium alloy dome compression tweeter, neodymium magnet system

Crossover

Crossover frequency750 Hz
Crossover typeBi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
System adjustmentsHigh frequency energy (750 Hz - 26 kHz) ±3 dB; Presence (2.5 - 5.0 kHz) ±3 dB

Physical

Dimensions (H × W × D)1040 × 468 × 489 mm (40.9 × 18.4 × 19.3 in)
Net weight, each54.6 kg
Cabinet constructionBirch ply with oiled walnut and solid walnut trim, extensive internal bracing
TerminalsBi-wire, gold plated, with earth terminal
S-Trax position (from cabinet front edge)124 mm (4.9 in)
SuperTrax position (from cabinet front edge)100 mm (3.9 in)

Finishes

FinishWalnut

Product overview

The Fyne Audio Vintage Ten is a 2-way floorstanding loudspeaker from the Vintage Series, pairing a hand-built twin-cavity birch ply cabinet in walnut and burr walnut with a 250 mm (10-inch) IsoFlare point source driver, a 75 mm titanium dome compression tweeter and the BassTrax Tractrix diffuser.

The Vintage Ten blends the cabinet finery of traditional loudspeakers with Fyne Audio's leading-edge engineering in a bold, no-compromise design. Although it is a sizeable cabinet, it is kept relatively slim so it sits easily in small and medium listening rooms, yet it has all the advances of its larger siblings: a 250 mm (10-inch) IsoFlare driver with FyneFlute roll surround, the BassTrax downward-firing port system and hand-built, Deep Cryogenically Treated crossovers. With its Presence and HF Energy controls, it is the most room-agnostic floorstander in the Vintage Series.

Every Vintage model uses the latest IsoFlare driver: the multi-fibre bass / midrange cone shares a common centre with the compression tweeter, so sound leaves as if from a single point, time aligned across the spectrum, with precise stereo imaging even off axis. The tweeter uses Fyne Audio's flagship 75 mm titanium dome, first developed for the F1-10 and F1-12, driven by a neodymium magnet with a vented rear chamber that pushes resonance below the 750 Hz crossover and break-up above the range of hearing. The massive cast aluminium chassis is bonded to a dedicated cabinet brace, and the FyneFlute roll surround terminates cone energy at the perimeter.

BassTrax appears here in its most advanced, highly tuned form. The lower chamber of the twin-cavity cabinet vents downwards onto a large Tractrix diffuser cone that turns the bass into a 360-degree spherical wavefront, giving extended, smooth and tuneful bass that integrates into the room and makes the large cabinet much less critical of position. Twin-cavity loading broadens the tuning, reduces cone excursion and blocks standing waves.

The crossover draws on the electronics of the flagship F1 Series: hand built with point-to-point wiring on vibration-damping fibreboard, with laminated iron core inductors, non-inductive thick film resistors, high-grade polypropylene capacitors, an autotransformer matching the compression tweeter to the amplifier and silver-plated crystal OFC wiring, then Deep Cryogenically Treated at a specialist facility. Gold-plated bi-wire terminals, an earth terminal and a hand-crafted Presence and Energy adjustment dial complete it. The cabinet sides are curved with variable radii to stop standing waves, and the oiled walnut, burr walnut inlays and gold-anodised metalwork are finished by hand in Scotland.

Frequency response (-6 dB, typical in room) 26 Hz - 26 kHz
Sensitivity (2.83 V/1 m) 94 dB
Recommended amplifier power (RMS) 20 - 280 W
IsoFlare point source driver 10-inch

Key features

  • 2-way Vintage Series floorstander with hand-finished walnut, burr walnut and gold-anodised metalwork
  • 250 mm IsoFlare point source driver with multi-fibre cone and FyneFlute roll surround
  • 75 mm titanium alloy dome compression tweeter with neodymium magnet system
  • Twin-cavity BassTrax Tractrix diffuser for 360-degree bass
  • Hand-built, Deep Cryogenically Treated bi-wired crossover at 750 Hz
  • Hand-crafted front Energy and Presence adjustment dial, each ±3 dB
  • Gold-plated bi-wire terminals and earth terminal
  • Birch ply cabinet with variable-radius curved sides and extensive internal bracing
  • Oiled walnut and solid walnut trim, cared for with the supplied wood wax
  • Wood-framed grille with traditional cloth weave

Made for

  • High-end stereo systems in small and medium listening rooms
  • Valve and solid-state amplifiers alike
  • Bi-wired and bi-amplified systems
  • Listeners who love traditional cabinet craftsmanship
  • Rooms where the speakers must stand nearer the walls, thanks to BassTrax

Placement and set-up

  • Unpack and position with the help of an assistant
  • Stereo: about 1.5 - 4.5 m apart, at least 0.5 m from the rear wall and 1 m from the side walls
  • Toe the cabinets in towards the listening position to focus the image
  • Fit the four M12 spikes and locking wheels, level the speaker and tighten the wheels; use the cups on wooden floors
  • Start Energy and Presence at the centre, then make small adjustments
  • Treat the oiled walnut sparingly with the wood wax several times a year, avoiding the baffle and grille cloth

In the box

  • Vintage Ten loudspeakers with grilles
  • Accessories box: 8 × M12 floor coupling spikes, 8 spike locking wheels, 8 floor protection cups, 1 tin of wood wax, 4 bi-wire links

Connections

  • Two pairs of gold-plated speaker terminals (HF and LF) for single-wire, bi-wire or bi-amp use
  • Bi-wire links supplied for single-wire connection
  • Earth (ground) terminal connected to the driver chassis
  • Accepts 4 mm banana plugs or spade connectors

Finishes

  • Walnut: oiled walnut veneer with burr walnut inlays and gold-anodised metalwork

Fyne Audio Vintage Ten: frequently asked questions

What amplifier suits the Vintage Ten?

Fyne Audio recommends 20 - 280 W RMS into its 8 Ω nominal impedance; continuous power handling is 140 W RMS and peak power handling 560 W. With 94 dB sensitivity (2.83 V/1 m) it also suits low-power valve amplifiers, which will simply limit the maximum volume in large rooms.

Can it be bi-wired or bi-amped?

Yes. Use the supplied links for single wire (best connected to the HF terminals), remove them for bi-wire with two cable sets or a bi-wire cable, or remove them and drive the LF and HF sections from separate amplifiers.

What do the Energy and Presence controls do?

Energy sets the tweeter level from the 750 Hz crossover upwards and controls how bright the sound is; Presence affects only 2.5 - 5.0 kHz, changing articulation, vocal clarity and image depth. Each gives ±3 dB; start both at the centre.

How do I care for the walnut finish?

Dust with a lint-free cloth such as muslin, and treat the oiled walnut sparingly with the supplied wood wax several times a year, or when the finish looks dry, keeping it off the baffle and grille cloth. Never use solvents or abrasives.

Where can I buy the Fyne Audio Vintage Ten in India?

The Fyne Audio Vintage Ten is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: High-end stereo listening room

Music lovers building a reference two-channel system.

Connections

ConnectTo
Integrated or power amplifier left / right outputsVintage Ten HF terminals (links fitted)
Amplifier ground terminalEarth terminal (optional)

Setup

  1. With an assistant, lift each speaker off its foam cushions.
  2. Fit the four M12 spikes and locking wheels and slide the speakers into place, about 1.5 - 4.5 m apart, 0.5 m from the rear wall and 1 m from the side walls.
  3. Level each speaker with the spikes and tighten the locking wheels; use the cups on wooden or marble floors.
  4. With the amplifier off, connect to the HF terminals with the bi-wire links fitted.
  5. Toe in towards the seat and set Energy and Presence to the centre before fine-tuning.

Tip: Choose an amplifier in the 20 - 280 W RMS range.

Workflow 2: Bi-wired system

Listeners getting the most from one stereo amplifier.

Connections

ConnectTo
Amplifier left outputLeft speaker HF and LF terminals
Amplifier right outputRight speaker HF and LF terminals

Setup

  1. Switch the amplifier off and remove the bi-wire links.
  2. Run two sets of cable, or a dedicated bi-wire cable, to the HF and LF terminals.
  3. Terminate with good 4 mm banana plugs or spades.
  4. Check polarity at every terminal.

Tip: Fyne Audio states that bi-wiring gives the best possible sound quality.

Workflow 3: Bi-amplified system

Enthusiasts with two stereo power amplifiers or four monoblocks.

Connections

ConnectTo
PreamplifierLF and HF power amplifiers
LF power amplifierLF terminals of both speakers
HF power amplifierHF terminals of both speakers

Setup

  1. Remove the bi-wire links: they must not be fitted when bi-amping.
  2. Use one stereo amplifier for both LF sections and the other for both HF sections, or four monoblocks.
  3. Match the amplifier gains.
  4. Run an earth wire or screened cable to the earth terminals if radio interference is present.

Tip: Leaving the links in place while bi-amping can damage the amplifiers.

Workflow 4: Valve amplifier and vinyl system

Owners of valve amplifiers and turntables who want matching traditional craftsmanship.

Connections

ConnectTo
TurntablePhono input or phono preamplifier
Valve amplifier 8 Ω outputsVintage Ten terminals (links fitted)

Setup

  1. Connect the turntable through a phono stage to the amplifier.
  2. Wire the amplifier to the speakers with the links fitted.
  3. Make use of the 94 dB (2.83 V/1 m) sensitivity for good levels from modest power.
  4. Fine-tune Presence for vocal clarity and image depth.

Tip: Powers below the recommended minimum will not damage the speakers; they limit maximum volume and dynamic range.

Workflow 5: Dedicated cinema room front pair

Cinema rooms where films and music share one high-end system.

Connections

ConnectTo
Source with HDMIAV processor or receiver
Front left / right outputs (direct or via a power amplifier)Vintage Ten pair

Setup

  1. Place the pair either side of the screen with the stereo wall distances.
  2. Drive them from the front outputs, through a stereo power amplifier if the processor has pre-outs.
  3. Run the processor's speaker set-up for levels and distances.
  4. Use Energy to balance the treble against the room's furnishings.

Tip: BassTrax spreads bass evenly, helping the large cabinets blend with the room.

Workflow 6: Care and super tweeters

Vintage Ten owners maintaining and extending their system.

Connections

ConnectTo
Speaker terminalsS-Trax or SuperTrax input (optional)

Setup

  1. Dust the cabinets with a lint-free cloth such as muslin.
  2. Several times a year, treat the oiled walnut sparingly with the supplied wood wax, away from the baffle and grille cloth.
  3. To add Fyne Audio super tweeters, place an S-Trax 124 mm or a SuperTrax 100 mm from the cabinet's front edge.
  4. Cover unused speakers with their cloth bags; avoid heat, humidity and direct sunlight.

Tip: Use the wood wax in a well-ventilated area and keep it away from children.

Request a Quote

FYNE AUDIO Vintage Ten

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›