GRACE DESIGN SB-MH

Product overview

The GRACE DESIGN SB-MH is the Spacebar modular standard mic holder: it clamps on any 7/8" Spacebar tube and holds a microphone at a precise position on the engraved scale.

Like all Spacebar modular mic holders it uses an adjustable clamping handle: turning it clockwise clamps the holder securely on the tube, and pulling while rotating sets the handle at a convenient angle. A sight hole positions the holder on the centimetre indicator circles of the tube scale. In the SB-BL vertical configuration two SB-MH holders carry most microphones on a 53 cm tube.

Compatible with

• Spacebar modular 7/8" tubes (E407, E420, E421)
• Spacebar SB-BL vertical configuration

In the box

• SB-MH standard mic holder

Available versions

• Standard 5/8-27 thread
• BSW 3/8-16 thread

GRACE DESIGN SB-MH: frequently asked questions

What is the difference to the SB-AMH?

The SB-AMH adds an adjustable top with a +90 to -90 degree angle scale; the SB-MH is the standard holder.

Which threads are available?

Standard 5/8-27 or BSW 3/8-16.

Where can I buy the GRACE DESIGN SB-MH in India?

The GRACE DESIGN SB-MH is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Vertical pair on the SB-BL

Recordists using large diaphragm microphones in a vertical configuration.

Connections

Setup

1. Clamp the holders on the tube.
2. Mount the microphones.
3. Set the 90° angle between them.
4. Tilt the assembly to aim.

Tip: The whole vertical assembly rotates on a horizontal axis.

Workflow 2: Adding a fixed position to an array

Users of modular arrays.

Connections

Setup

1. Loosen the handle.
2. Set the sight hole on the scale.
3. Clamp.
4. Lock the clip with the nut.

Tip: Pull the handle while rotating to change its resting angle.