LYNX CBL-ICC

Product overview

The LYNX CBL-ICC is an internal clock cable: it can be used to clock-sync any LYNX PCI or PCIe audio cards inside the computer.

Fitted between two LYNX audio cards in the same computer, the CBL-ICC shares the sample clock internally, so the cards run in sync without an external clock cable at the back of the machine. The official picture shows a grey jacketed cable with a compact connector at each end.

Compatible with

• Any LYNX PCI audio card
• Any LYNX PCIe audio card

In the box

• CBL-ICC internal clock cable x 1

LYNX CBL-ICC: frequently asked questions

What does the CBL-ICC do?

LYNX states that it can be used to internally clock sync any LYNX PCI or PCIe audio cards.

Which cards can it link?

Any LYNX PCI or PCIe audio cards, as LYNX states on the product page.

Where can I buy the LYNX CBL-ICC in India?

The LYNX CBL-ICC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Two cards in one computer

Studios running more than one LYNX PCI or PCIe card for a larger channel count.

Connections

Setup

1. Switch the computer off and disconnect the power.
2. Fit both cards, then connect the CBL-ICC between their internal clock connectors.
3. Close the computer and switch on.
4. Set one card as the clock master and the other to follow the internal clock in the card settings.

Tip: Handle the cards by their edges and ground yourself before working inside the computer.

Workflow 2: Expanding an existing system

Adding a second LYNX card to a working setup.

Connections

Setup

1. Install the new card and link it with the CBL-ICC.
2. Start the computer and confirm both cards report the same sample rate and lock.
3. Record a test across channels of both cards.