LYNX CBL-L2AudioA
PRICE ON ENQUIRY
LYNX CBL-L2AudioA analogue cable for the E44 and LynxTWO-A: 25-pin male D-sub to 4 male and 4 female XLR, shielded twisted pair, 6 ft. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
LYNX CBL-L2AudioA
| Card end | 25‑pin male D‑sub |
| Inputs | 4 female XLR |
| Outputs | 4 male XLR |
| Cable | Shielded twisted pair |
| Length | 6 feet (1.8 m) |
| For | LYNX E44 and LynxTWO‑A |
Product overview
The LYNX CBL-L2AudioA is the analogue audio cable for the LYNX E44 and LynxTWO-A cards: 25-pin male D-sub to 4 male and 4 female XLR connectors on six-foot shielded twisted pair cabling.
It plugs into the 25-pin audio port on the card bracket and carries the card's four balanced analogue inputs (female XLR) and four outputs (male XLR). The digital I/O and word clock of the E44 use the separate CBL-ESYNC cable.
| Analogue inputs and outputs | 4 + 4 |
| Male and female | XLR |
| Length | 6 ft |
| Twisted pair | Shielded |
Key features
- 25-pin male D-sub for the E44 / LynxTWO-A audio port
- 4 female XLR (inputs) and 4 male XLR (outputs)
- Shielded twisted pair cabling, six feet
Compatible with
- LYNX E44 (Rev C)
- LYNX LynxTWO-A
In the box
- CBL-L2AudioA cable
LYNX CBL-L2AudioA: frequently asked questions
What is the pinout?
IN 1-4 hot on pins 24, 21, 18, 15 and OUT 1-4 hot on pins 10, 7, 4, 1, with cold and ground on the adjacent pins (E22 / E44 manual); pin 13 is not used.
Where can I buy the LYNX CBL-L2AudioA in India?
The LYNX CBL-L2AudioA is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Four-channel recording
Studios recording four sources at once.
Connections
| Connect | To |
|---|---|
| Preamplifier outputs | Female XLR inputs 1‑4 |
| Monitors and cue | Male XLR outputs 1‑4 |
Setup
- Connect the D-sub to the E44 audio port.
- Connect the XLR connectors.
- Set levels in Lynx Mixer.
- Record four channels.
Tip: Balanced XLR connections give the best noise performance.
Workflow 2: Measurement and archiving
Labs and archives using the E44 as a precise instrument.
Connections
| Connect | To |
|---|---|
| Device under test or playback machine | XLR inputs |
| Test signal destination | XLR outputs |
Setup
- Connect the inputs and outputs.
- Set the full-scale level.
- Choose the sample rate.
- Capture the signals.
Tip: The E44 supports sample rates up to 192 kHz.
