LYNX CBL-L2AudioB

Product overview

The LYNX CBL-L2AudioB is the replacement audio cable for the LynxTWO-B: a 6 ft breakout that carries the card's analogue inputs and outputs from one 25-pin D-sub connector to individual XLR connectors.

As the official picture shows, the multicore cable fans out to eight colour-coded, labelled XLR connectors: two female XLR for the inputs (IN 1 and IN 2) and six male XLR for the outputs, so every channel is easy to identify behind a desk or rack. The D-sub end carries the LYNX logo and fits the audio connector of the LynxTWO-B.

Compatible with

• LynxTWO-B: replacement audio cable

In the box

• CBL-L2AudioB LynxTWO-B audio cable x 1

LYNX CBL-L2AudioB: frequently asked questions

Which product is the CBL-L2AudioB for?

LYNX lists it as the replacement audio cable for the LynxTWO-B.

How long is the cable?

LYNX states a length of 6 feet (about 1.83 m).

Where can I buy the LYNX CBL-L2AudioB in India?

The LYNX CBL-L2AudioB is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Connecting the LynxTWO-B to a studio

Studios restoring or extending a LynxTWO-B system.

Connections

Setup

1. Switch the computer and connected equipment off.
2. Plug the 25-pin D-sub into the LynxTWO-B audio connector and tighten the screws.
3. Connect the female XLR inputs to the source outputs and the male XLR outputs to the destination inputs, following the colour-coded labels.
4. Switch on and check each channel at low level.

Tip: The coloured, labelled XLR shells make it quick to trace each channel behind a rack.

Workflow 2: Replacing a worn or damaged cable

Owners of a LynxTWO-B whose original audio cable is damaged or missing.

Connections

Setup

1. Note which XLR goes to which device before removing the old cable.
2. Unplug the old cable with the system switched off.
3. Fit the CBL-L2AudioB and reconnect each XLR to the same device.
4. Power up and confirm every input and output.