LYNX CBL-XM2TM18
PRICE ON ENQUIRY
LYNX CBL-XM2TM18 XLR male to 1/4 in TRS adapter cable, 18 in (457 mm), XLR M to 1/4 in TRS. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Cable
| Type | XLR male to 1/4 in TRS adapter cable |
| Part number | CBL‑XM2TM18 |
| Connector, end 1 | XLR, 3‑pin male |
| Connector, end 2 | 1/4 in (6.35 mm) TRS plug, male |
| Length | 18 in (457 mm) |
| Signal | 1 channel (2 for stereo) |
Product overview
The LYNX CBL-XM2TM18 is an 18 in (457 mm) adapter cable with a male XLR connector at one end and a male 1/4 in TRS plug at the other: analogue in to 1/4 in balanced or unbalanced TRS.
The male XLR plugs into a female XLR analogue input, such as an input on a LYNX breakout cable, and the TRS plug connects to the balanced or unbalanced 1/4 in output of a source. Each cable carries one channel, so LYNX notes that two are needed for stereo.
In the box
- CBL-XM2TM18 XLR male to 1/4 in TRS adapter cable x 1
LYNX CBL-XM2TM18: frequently asked questions
Does it work with balanced and unbalanced sources?
Yes. LYNX describes it as analogue in to 1/4 in balanced or unbalanced TRS.
How many cables do I need for stereo?
Two: one per channel.
How long is it?
LYNX states 18 in, about 457 mm.
Where can I buy the LYNX CBL-XM2TM18 in India?
The LYNX CBL-XM2TM18 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: TRS source into an XLR input
Recording a source with 1/4 in outputs into an XLR analogue input.
Connections
| Connect | To |
|---|---|
| XLR male end | Female XLR analogue input |
| 1/4 in TRS end | Balanced or unbalanced 1/4 in output |
Setup
- Plug the male XLR end into the input.
- Plug the TRS end into the output of the source.
- Set the input level and check the signal.
Tip: Use two cables for a stereo source: left and right.
Workflow 2: Synths and outboard returns
Bringing keyboards or outboard processors with 1/4 in outputs into the recording system.
Connections
| Connect | To |
|---|---|
| 2 x CBL‑XM2TM18 | Left and right XLR inputs |
Setup
- Connect one cable to each 1/4 in output.
- Plug the XLR ends into a pair of inputs.
- Record a test and match levels.
