NEUTRIK NAC3FXXB-W-S

Product overview

The NEUTRIK NAC3FXXB-W-S is a powerCON locking AC mains cable connector, keyed and colour coded grey for power-out, with screw terminals for cable diameters of 6 to 12 mm.

The powerCON FXXA/FXXB is a single-phase (3 conductor) lockable power connector with circuit breaking capability when mated with powerCON XX series receptacles. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed to guarantee a safe power connection. It is certified to IEC EN 60320-1, UL 60320-1 and CSA C22.2 No. 60320-1 and accepted for cord sets as per IEC EN 60799:2021.

Features and benefits

• IEC EN 60320-1 / UL 60320-1 / CSA C22.2 No. 60320-1 certified: accepted as a component for cord sets according to IEC 60799 / UL 817 and equipment according to IEC 62368-1; UL US 498 / UL CA 498
• Ergonomic design with a slip-proof two-component moulded housing
• Power-in (blue) and power-out (grey) versions with different keying to avoid intermating
• NEUTRIK locking bushing and strain relief for cable diameters 6 mm to 12 mm
• Easy to assemble: the strain relief locks with the insert mechanically and aligns with the housing
• Extremely robust and reliable
• Easy and reliable twist lock system
• Improved kink protection by the two-component bushing

Assembly

Place the bushing and chuck over the cable first, prepare the cable as shown in the NEUTRIK product manual, slide the conductors into the contacts and clamp them with the screws (Torx T8, 0.7 Nm), then fit the chuck on the insert, slide both into the housing and push and turn the bushing on. All three parts must have the same colour coding: grey for power-out.

In the box

• 1 x NAC3FXXB-W-S cable connector

NEUTRIK NAC3FXXB-W-S: frequently asked questions

What is the rating of the NAC3FXXB-W-S?

EN 60320-1: 16 A 250 V AC with circuit breaking capability; cUL 60320-1, UL USA 498 and UL CA 498: 20 A 127 V AC.

Which cable diameters does it take?

6 to 12 mm, with wire sizes of 1.5 to 2.5 mm² (16 to 12 AWG).

Is it power-in or power-out?

Power-out: it is keyed and colour coded grey. The blue power-in versions have different keying so the two cannot be intermated.

How is it locked?

With a twist lock system.

Where can I buy the NEUTRIK NAC3FXXB-W-S in India?

The NEUTRIK NAC3FXXB-W-S is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Power link between devices

A locked power-out cable from a powerCON grey outlet to the next device.

Connections

Setup

1. Slide bushing and chuck over the cable.
2. Prepare the cable as in the product manual.
3. Clamp L, N and PE with the Torx T8 screws (0.7 Nm).
4. Assemble insert, chuck and housing and push-turn the bushing.

Tip: All three parts must be the same colour: grey for power-out.

Workflow 2: Daisy-chained powered loudspeakers

Linking mains power from one powered loudspeaker's powerCON grey outlet to the next.

Connections

Setup

1. Assemble the connector on the link cable.
2. Mate it with the powerCON grey outlet.
3. Twist to lock.
4. Check the lock before use.

Tip: Circuit breaking capability when mated with powerCON XX series receptacles.

Workflow 3: Lighting fixtures

Linking power between stage lighting fixtures with powerCON grey outlets.

Connections

Setup

1. Choose cable within 6-12 mm O.D.
2. Assemble as per the manual.
3. Mate and twist-lock.
4. Label each feed.

Tip: Rated EN 60320-1: 16 A 250 V AC.

Workflow 4: Cord sets

Building certified cord sets.

Connections

Setup

1. Use cable types from the NEUTRIK cable list for the -S version.
2. Assemble as per the manual.
3. Test the cord set.
4. Mark the cord set.

Tip: Accepted for cord sets as per IEC EN 60799:2021.

Workflow 5: Touring power looms

Rugged mains connections for touring.

Connections

Setup

1. Assemble on rubber or PVC mains cable.
2. Tighten the bushing.
3. Mate and twist-lock.
4. Inspect regularly.

Tip: Slip-proof two-component moulded housing.

Workflow 6: Power-out link leads

Making short locking link leads from a powerCON grey outlet.

Connections

Setup

1. Cut the cable to length.
2. Prepare the cable.
3. Assemble the NAC3FXXB-W-S.
4. Mate with the powerCON grey outlet and lock.

Tip: Power-in (blue) and power-out (grey) keying prevents intermating.