





PRIMARE 19" Rack Mount
PRICE ON ENQUIRY
Primare 19" Rack Mount: robust bracket kit for SP25, SPA25 Prisma, A35.2 and A35.8, also I25, I35, PRE35, CD35, R35. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Type | 19-inch rack-mount bracket kit |
| Installations | Home and marine |
| Contents | 2 brackets, 4 screws |
| Fitting | Brackets fasten to the underside of the component |
Compatibility
| Designed for | SP25, SPA25 Prisma, A35.2, A35.8 |
| Also fits, 35 mm gap above | I25, I35, PRE35, CD35 |
| Also fits, 41 mm gap above | R35 |
Product overview
The Primare 19" Rack Mount is a robust, easy-to-install pair of rack-mount brackets that fits Primare components into a standard 19-inch equipment rack, designed for both home and marine installations.
The kit consists of two steel brackets that fasten to the underside of the component with screws. Fitting takes only a few minutes: place the component upside down on a soft surface, remove four screws from the base, set the two brackets in place and fasten them with the four screws included. The front ears then mount the component in a 19-inch rack like any other piece of rack equipment.
The rack mount is designed primarily for the SP25 processor, the SPA25 Prisma and the A35.2 and A35.8 power amplifiers, which fill the brackets to the top. It also takes the I25, I35, PRE35 and CD35, leaving a 35 mm gap between the top of the component and the top of the rack mount, and the R35, with a 41 mm gap. Outside dimension drawings for all current Primare models are available from Primare to help plan the rack.
It suits custom-installed media rooms, home cinema racks, equipment rooms for whole-home systems and boat installations, where components need to be held firmly in a rack rather than standing on a shelf.
Key features
- Standard 19-inch rack mounting for Primare components
- Robust brackets, easy to install with the four screws included
- Designed for home and marine installations
- Designed primarily for SP25, SPA25 Prisma, A35.2 and A35.8
- Also fits I25, I35, PRE35, CD35 (35 mm gap above) and R35 (41 mm gap above)
Made for
- Custom-installed media rooms and home cinema racks
- Equipment rooms for whole-home audio systems
- Marine installations
In the box
- 2 × rack-mount brackets
- 4 × fixing screws
Primare 19" Rack Mount: frequently asked questions
Which Primare components does it fit?
It is designed primarily for the SP25, SPA25 Prisma, A35.2 and A35.8. It can also be used with the I25, I35, PRE35 and CD35, with a 35 mm gap from the top of the component to the top of the rack mount, and with the R35, with a 41 mm gap.
How is it installed?
Place the component on a soft surface with the bottom side up, remove the four screws marked #1, place the two brackets as shown in the installation drawing and fasten them at the positions marked #2 using the four screws included.
Can it be used on a boat?
Yes. Primare designed the rack mount for both home and marine installations.
Where can I buy the Primare 19" Rack Mount in India?
The Primare 19" Rack Mount is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Power amplifier in a media-room rack
Installers and owners of home cinema and media rooms with a 19-inch equipment rack.
Connections
| Connect | To |
|---|---|
| Two rack-mount brackets | Underside of the A35.8, A35.2 or SP25 |
| Bracket front ears | 19-inch rack rails |
Setup
- Place the component on a soft surface with the bottom side up.
- Remove the four screws marked #1.
- Place the two brackets as shown in the installation drawing.
- Fasten the brackets at the positions marked #2 with the four screws included.
- Turn the component over and fix the front ears to the rack rails.
Tip: These models fill the brackets to the top, so the rack front looks flush.
Workflow 2: Integrated amplifier or source in a rack
Owners who want an I25, I35, PRE35, CD35 or R35 in the same rack as the rest of the system.
Connections
| Connect | To |
|---|---|
| Two rack-mount brackets | Underside of the component |
| Bracket front ears | 19-inch rack rails |
Setup
- Fit the brackets to the underside in the same way, with the four screws included.
- Allow for the gap above the component: 35 mm for I25, I35, PRE35 and CD35, 41 mm for R35.
- Plan the rack positions with Primare's outside dimension drawings.
- Mount the component in the rack.
Tip: Leave the space above the component free for ventilation.








