






PRIMARE I35 DAC
PRICE ON ENQUIRY
Primare I35 DAC integrated amplifier: UFPD 2, 2 × 150 W into 8 Ω, DM36 DAC with optical, coaxial and USB-B inputs, MQA. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Amplifier
| Type | Modular stereo integrated amplifier with DM36 DAC module, 35 Series |
| Amplifier module | Primare UFPD 2 |
| Power supply | Primare APFC (switch-mode, Active Power-Factor Correction) |
| Amplifier output | 2 × 150 W into 8 Ω, 2 × 300 W into 4 Ω |
| Optional module | SM35 Prisma network player module |
Analogue inputs and outputs
| Balanced inputs | 2 × XLR stereo pair (A1, A2), 30 kΩ impedance |
| Unbalanced inputs | 3 × RCA stereo pair (A3 - A5), 15 kΩ impedance |
| Preamplifier output | 1 × RCA stereo pair (PRE), 100 Ω impedance |
| Line output | 1 × RCA stereo pair (LINE), 100 Ω impedance |
| Speaker outputs | Left and right terminals for spade terminals, banana plugs or bare wires |
Digital (DM36 module)
| Optical inputs | 4 × optical (D6 - D9), up to 192 kHz / 24-bit |
| Coaxial inputs | 2 × RCA (D10, D11), up to 192 kHz / 24-bit |
| USB input | 1 × USB-B (input 12), up to 384 kHz / 32-bit; DSD256 (11.2 MHz) |
| Digital output | 1 × coaxial RCA: digital inputs at their native format; analogue inputs selectable 48 or 96 kHz |
| PCM up-sampling | 44.1 / 48 kHz to 88.2 / 96 kHz, on or off |
| MQA | Full MQA processing; MQA and MQA Studio shown on the display |
| DAC frequency response | 44.1 kHz: +0.1 / -0.4 dB; 48 / 96 / 192 kHz: +0.1 / -0.2 dB (20 Hz - 20 kHz) |
Performance
| Gain, RCA inputs | Preamplifier output 16.5 dB; line output 0 dB; speaker output 42.5 dB |
| Gain, XLR inputs | Preamplifier output 10.5 dB; speaker output 36.5 dB |
| Analogue frequency response | 20 Hz - 20 kHz: -0.2 dB |
| Distortion, THD + N | < 0.05 %, 20 Hz - 20 kHz, 10 W at 8 Ω |
| Signal to noise | > 100 dB (AES17 filter) |
Control
| Remote control | C25 system remote control (IR) |
| RS232 | Outboard system control port |
| IR | 3.5 mm input / output |
| 12 V trigger | 3.5 mm output |
General
| Display | OLED |
| Power consumption | Standby < 0.5 W (ECO standby mode); operating 40 W < 600 W |
| Dimensions (W × D × H) | 430 × 420 × 106 mm with knobs and connectors; 430 × 382 × 106 mm without knobs and connectors |
| Weight | 11 kg |
| Colour | Black or titanium |
Versions
| I35-DAC-BLACK | Black |
| I35-DAC-TITANIUM | Titanium |
Product overview
The Primare I35 DAC is the I35 modular integrated amplifier with the DM36 digital-to-analogue converter module installed: UFPD 2 amplification delivering 150 W per channel into 8 Ω, balanced and unbalanced analogue inputs, and a full-featured DAC stage for PCM up to 384 kHz / 32-bit and DSD256, with up-sampling options and MQA processing. The SM35 Prisma network player module can be added at any time.
Providing 150 W per channel into 8 Ω, and 300 W into 4 Ω, of absolutely linear UFPD 2 amplification across the entire audible bandwidth, the I35 DAC delivers naturally fast, clean and agile sound with an unprecedented ability to bring music to life. In UFPD 2 a new error amplifier circuit leaves the gain-versus-frequency curve untouched, so the bandwidth does not have to be limited: phase shift in the audio band stays very low, a custom-made output coil keeps feedback control working across the entire audio band, and the result is even more linear amplification with lower noise and truly black backgrounds.
Two XLR inputs feed fully balanced preamplifier circuitry, the inputs are switched by relays for better isolation and sound than conventional CMOS switches, and a 2 × 4 channel balanced-mode volume control IC was selected for optimal channel balance and performance at low listening levels. Power comes from Primare's APFC switch-mode supply, chosen because it can follow the rapidly varying demand of the UFPD 2 module, with capacitive storage for peak transients and dual PFC converters running 180 degrees out of phase to minimise interference with other equipment on the same mains supply.
The DM36 is a completely new, thoroughly designed digital-to-analogue converter that improves on its predecessor, the DM35, with a sound that is more richly detailed and lifelike and more precise three-dimensionality within a larger soundstage. Four optical and two coaxial inputs accept up to 192 kHz / 24-bit, the USB-B input connects a computer at up to 384 kHz / 32-bit and DSD256, and a coaxial output passes the digital signal on. PCM up-sampling raises 44.1 and 48 kHz audio to 88.2 and 96 kHz, and full MQA processing includes MQA CD playback from the CD15 Prisma, DD15, CD35 Prisma and DD35 over an optical or coaxial connection, with MQA or MQA Studio shown on the OLED display.
Modular by design, the I35 DAC can take the SM35 Prisma network player module at any time, adding network streaming with multi-room and multi-zone playback managed from the Prisma app. It continues the Primare tradition of astonishing performance from compact, elegant integrated amplifiers that install easily into virtually any living environment, with the simple Scandinavian look, the signature control knob, known for how it feels in the hand, and the idea of lagom: not too much, not too little, everything in balance, proportion and harmony.
| Amplifier output into 8 Ω (2 × 300 W into 4 Ω) | 2 × 150 W |
| PCM via USB-B, plus DSD256 | 384 kHz / 32-bit |
| 4 optical, 2 coaxial, 1 USB-B | 7 digital inputs |
| Signal to noise, AES17 filter | > 100 dB |
Key features
- UFPD 2 amplification: amplifier output 2 × 150 W into 8 Ω, 2 × 300 W into 4 Ω, absolutely linear across the entire audible bandwidth
- DM36 DAC module installed: PCM up to 384 kHz / 32-bit and DSD256 via USB-B, PCM up-sampling and full MQA processing
- Four optical and two coaxial digital inputs, up to 192 kHz / 24-bit; coaxial digital output
- USB-B input to use the amplifier as a computer's sound output device
- Fully balanced preamplifier circuitry with two XLR and three RCA analogue inputs
- Relay input switching and a 2 × 4 channel balanced-mode volume control IC
- APFC switch-mode power supply with dual PFC converters and capacitive storage for peak transients
- OLED display with MQA and MQA Studio indication
- Input alias names, auto sense, input gain from -30 dB to +30 dB and fixed gain for surround sound pass-through
- Variable PRE and fixed LINE outputs; speaker mute for listening through a headphone amplifier
- C25 system remote control, RS232, IR in / out and 12 V trigger out
- Ready for the SM35 Prisma network player module; Scandinavian design in black or titanium
Made for
- Stereo listening rooms with both analogue and digital sources
- Living-room TV sound through an optical input
- Computer audio at the desk or in the living room through USB-B
- Primare CD sources such as the DD35 and CD35 Prisma, including MQA CD playback
- Multi-channel home theatre systems, as the amplifier for the front channels via fixed gain
- Custom installations with RS232, IR and 12 V trigger control
In the box
- I35 DAC integrated amplifier
- Mains cable
- IR cable
- Trigger cable
- C25 remote control with batteries
- AC Polarity Pen
Connections
- 2 × balanced analogue stereo inputs, XLR (A1, A2), 30 kΩ
- 3 × unbalanced analogue stereo inputs, RCA (A3 to A5), 15 kΩ
- 4 × optical digital inputs (D6 to D9), up to 192 kHz / 24-bit
- 2 × coaxial digital inputs, RCA (D10, D11), up to 192 kHz / 24-bit
- 1 × USB-B computer input (input 12), up to 384 kHz / 32-bit and DSD256
- 1 × coaxial digital output, RCA
- PRE (variable level) and LINE (fixed level) outputs, RCA, 100 Ω
- Loudspeaker terminals for spade terminals, banana plugs or bare wires
- RS232, IR in and IR out (3.5 mm), 12 V trigger out (3.5 mm)
- Mains inlet with power switch on the back panel
Finishes
- Black (I35-DAC-BLACK)
- Titanium (I35-DAC-TITANIUM)
Primare I35 DAC: frequently asked questions
What does the DM36 module add to the I35?
A full-featured digital-to-analogue converter stage: four optical and two coaxial digital inputs (up to 192 kHz / 24-bit), a USB-B computer input (up to 384 kHz / 32-bit and DSD256), a coaxial digital output, PCM up-sampling and full MQA processing. The analogue inputs, UFPD 2 amplifier and controls are those of the I35.
Can I connect a computer to the I35 DAC?
Yes. Connect the computer to the USB-B input with a USB-A to USB-B cable and select input 12; the amplifier then appears as a sound output device called Primare USB Audio DAC. Some computers need the Primare USB audio driver from primare.net; others need no driver. Set STANDBY MODE to NORMAL if the amplifier should wake from the computer input.
Does the I35 DAC play MQA?
Yes. The DM36 module provides full MQA processing, and MQA CD playback is supported from the Primare CD15 Prisma, DD15, CD35 Prisma and DD35 over an optical or coaxial connection. The OLED display shows MQA, or MQA. for MQA Studio.
Can I add network streaming later?
Yes. The modular design allows the SM35 Prisma network player module to be added at any time, adding network streaming with multi-room and multi-zone playback managed from the Prisma app.
Can the I35 DAC be used in a home theatre system?
Yes. Any input can be set to fixed gain (0 dB, equivalent to volume setting 66), which works as a surround sound pass-through, so the I35 DAC can power the front left and right channels of a multi-channel system.
Where can I buy the Primare I35 DAC in India?
The Primare I35 DAC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo listening room with CD and vinyl
Music lovers building a two-channel Primare system round one integrated amplifier.
Connections
| Connect | To |
|---|---|
| DD35 or CD35 coaxial digital out | I35 DAC coaxial input D10 |
| R35 phono preamplifier XLR outputs | I35 DAC balanced input A1 |
| I35 DAC speaker terminals | Pair of passive loudspeakers |
Setup
- Place the I35 DAC on a rack or stand made for audio equipment, with at least 50 mm of space around the sides and top.
- Connect red to + and black to - on both loudspeakers, using spades, banana plugs or bare wire.
- Connect the CD source to coaxial input D10 and the phono preamplifier to balanced input A1 with XLR cables.
- Rename the inputs with ALIAS (for example CD and PHONO) and match their levels with INPUT GAIN.
- Run the supplied trigger cable from the I35 TRIG OUT to the CD source's TRIG IN so it follows the amplifier on and to standby.
Tip: With the DM36 module, MQA CD playback is supported from the DD35 and CD35 Prisma over optical or coaxial.
Workflow 2: Living-room TV sound
Families who want TV, films and music through the same pair of loudspeakers.
Connections
| Connect | To |
|---|---|
| TV optical digital output | I35 DAC optical input D6 |
| I35 DAC speaker terminals | Loudspeakers beside the TV |
Setup
- Connect the TV's optical output to optical input D6 and give the input the alias TV.
- Set AUTO SENSE for D6 to WAKE+SELECT so the amplifier wakes and selects the TV when sound arrives.
- Set STANDBY MODE to ECO: standby consumption stays below 0.5 W and the amplifier can still wake from the analogue and digital inputs.
- Set DEFAULT VOLUME to a comfortable start-up level.
Tip: AUTO-STANDBY returns the amplifier to standby after 10, 15 or 20 minutes without signal or use.
Workflow 3: Desktop and computer audio
Home offices and study rooms where music plays from a computer.
Connections
| Connect | To |
|---|---|
| Computer USB port | I35 DAC USB-B input (USB-A to USB-B cable) |
| I35 DAC speaker terminals | Bookshelf or floorstanding loudspeakers |
Setup
- Install the Primare USB audio driver from primare.net if the computer needs it.
- Connect the computer to the USB-B input with a USB-A to USB-B cable.
- Select input 12 on the amplifier.
- Choose Primare USB Audio DAC as the computer's sound output device.
- Set STANDBY MODE to NORMAL so the amplifier can also wake from the computer input.
Tip: The USB-B input accepts PCM up to 384 kHz / 32-bit and DSD256.
Workflow 4: Front channels of a 5.1 home theatre
Home theatre owners who want the I35 DAC to power the front speakers for films and music.
Connections
| Connect | To |
|---|---|
| AV processor front left / right pre-outs | I35 DAC analogue input set to FIXED |
| I35 DAC speaker terminals | Front left and right loudspeakers |
| Stereo sources | Other I35 DAC inputs (variable) |
Setup
- Connect the processor's front left and right pre-outs to one analogue input.
- Set VOLUME for that input to FIXED (0 dB, equivalent to volume 66) and confirm the loud-volume warning.
- The processor now controls the front channel level for films.
- Keep the other inputs variable for stereo listening through the I35 DAC volume control.
Tip: Fixed gain overrules MAXIMUM VOLUME, so set the processor levels before playing.
Workflow 5: Late-night headphone listening
Listeners who share a home and want quiet listening at night.
Connections
| Connect | To |
|---|---|
| I35 DAC LINE or PRE output (RCA) | Headphone amplifier input |
| Headphone amplifier | Headphones |
Setup
- Connect a headphone amplifier to the LINE output (volume on the headphone amplifier) or the PRE output (volume on the I35 DAC).
- Turn on SPEAKER MUTE in AUDIO SETTINGS; the display shows SM in front of the volume.
- The loudspeakers stay silent while the RCA outputs remain active.
- Press and hold MUTE on the C25 remote to switch back to the loudspeakers.
Tip: When speaker mute is turned off, the volume returns to the DEFAULT VOLUME setting.
Workflow 6: Custom-installed system with central control
Installers and owners of whole-home and media-room systems.
Connections
| Connect | To |
|---|---|
| Controller system | I35 DAC RS232 port (null modem cable) |
| I35 DAC TRIG OUT | TRIG IN of another component |
| IR distribution | I35 DAC IR IN / IR OUT (3.5 mm) |
Setup
- Connect the controller to the RS232 port with a twisted (null modem) cable.
- Run the supplied trigger cable from TRIG OUT so another component follows the amplifier on and to standby.
- Use the IR cable and IR in / out for wired IR control of equipment in a cabinet.
- Lock the front panel in GENERAL SETTINGS if needed.
Tip: The C25 remote also operates the other Primare products in the system through its AMP, CD and PRE modes.








