PRIMARE PRE35 product guide and data sheet cover
‹
PRIMARE PRE35 product guide and data sheet coverPRIMARE PRE35 data sheet page 2: Inside the PRE35PRIMARE PRE35 data sheet page 3: ConnectionsPRIMARE PRE35 data sheet page 4: Control and settingsPRIMARE PRE35 data sheet page 5: Modular by design
›

Brand: PRIMARE

PRIMARE PRE35

PRICE ON ENQUIRY

Category: Hi-Fi Amplifiers | Series: 35 SERIES

Primare PRE35 modular preamplifier: fully balanced, dual XLR inputs and outputs, THD + N < 0.002 %, ready for DM36 DAC and Prisma modules. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Preamplifier

TypeModular balanced stereo preamplifier, 35 Series
CircuitFully balanced analogue preamplification, four-layer main board
Optional modulesDM36 DAC module, SM35 Prisma network player module

Inputs and outputs

Balanced inputs2 × XLR stereo pair (A1, A2), 30 kΩ impedance
Unbalanced inputs3 × RCA stereo pair (A3 - A5), 15 kΩ impedance
Preamplifier outputs, XLR2 × stereo pair (PRE2, PRE3), 380 Ω impedance
Preamplifier output, RCA1 × stereo pair (PRE1), 100 Ω impedance
Line output1 × RCA stereo pair (LINE, fixed level), 100 Ω impedance

Performance

Gain, preamplifier outputRCA in / RCA out 16.5 dB; XLR in / XLR out 16.5 dB; RCA in / XLR out 22.5 dB; XLR in / RCA out 10.5 dB
Gain, line output0 dB
Analogue frequency response20 Hz - 20 kHz: ± 0.1 dB
Distortion, THD + N< 0.002 %, 20 Hz - 20 kHz
Signal to noise> 100 dB (AES17 filter)

Control

Remote controlC25 system remote control (IR)
RS232Outboard system control port
IR3.5 mm input / output
12 V trigger3.5 mm output

General

DisplayOLED
Power supplyLinear supply in operation; switch-mode supply for standby only
Power consumptionStandby < 0.3 W; operating 28 W < 50 W
Dimensions (W × D × H)430 × 420 × 106 mm with knobs and connectors; 430 × 382 × 106 mm without knobs and connectors
Weight11.3 kg
ColourBlack or titanium

Versions

PRE35-BLACKBlack
PRE35-TITANIUMTitanium

Product overview

The Primare PRE35 is a modular balanced stereo preamplifier from the 35 Series, with dual XLR inputs and outputs, fully balanced analogue preamplification circuitry and modular construction that allows sophisticated DAC and Prisma network modules to be added to the all-analogue preamplifier at any time.

The PRE35 is an exceptional system control centre, providing unprecedented low-noise, distortion-free selection and transmission of any analogue input. Its carefully crafted, fully balanced circuit design benefits from a four-layer main board for the shortest possible signal path; inputs are switched by relays for better isolation and sound than conventional CMOS switches, and a 2 × 4 channel balanced-mode volume control IC gives optimal channel balance and performance at low listening levels. Distortion (THD + N) stays below 0.002 % and the frequency response within ± 0.1 dB from 20 Hz to 20 kHz.

In normal operation the circuits run from a linear power supply: a switch-mode supply is used only in standby and turns completely off when the linear supply takes over, so the power is clean and noise-free. Two balanced XLR and three RCA inputs are matched by two pairs of balanced XLR preamplifier outputs, an RCA preamplifier output and a fixed-level RCA line output, so the PRE35 connects to a power amplifier with balanced or unbalanced inputs, while the line output feeds active speakers or an analogue recorder.

The PRE35 is built for easy integration: an OLED display developed for long life and readability, auto-sense input circuitry that selects a source as it starts playing, input aliases and input gain, and a fixed-gain setting that passes the front channels of a home theatre straight through. The C25 system remote control, with new proprietary control codes for faster response, RS232, IR in and out and a 12 V trigger output connect it to the rest of the system.

Modular by design, the PRE35 accepts the DM36 digital-to-analogue converter module and the SM35 Prisma network player module, either at the time of purchase or at a later date, for unprecedented system customisation. Its look and feel follow Scandinavian design: simple and elegant, with the signature control knob, known for its appearance and for how it feels in the hand as an input is selected or the volume adjusted. Primare calls it lagom: not too much, not too little, everything in balance, proportion and harmony.

THD + N, 20 Hz - 20 kHz < 0.002 %
Frequency response, 20 Hz - 20 kHz ± 0.1 dB
Analogue stereo inputs 2 × XLR + 3 × RCA
Preamplifier outputs, plus LINE 2 × XLR + 1 × RCA

Key features

  • Fully balanced analogue preamplifier with dual XLR inputs and outputs
  • Four-layer main board for the shortest possible signal path
  • Low-noise, distortion-free selection and transmission of any analogue input
  • Two XLR and three RCA inputs; two XLR and one RCA preamplifier outputs plus a fixed-level LINE output
  • Linear power supply in operation; the switch-mode standby supply turns completely off
  • Relay input switching and a 2 × 4 channel balanced-mode volume control IC
  • THD + N < 0.002 % and frequency response ± 0.1 dB, 20 Hz - 20 kHz
  • OLED display, auto sense, input aliases and input gain from -30 dB to +30 dB
  • Fixed-gain setting for surround sound pass-through in a multi-channel system
  • C25 system remote control with new proprietary control codes, RS232, IR in / out and 12 V trigger out
  • Modular design: DM36 DAC and SM35 Prisma network player modules can be added at any time
  • Scandinavian design with the signature control knob, in black or titanium

Made for

  • Separates systems with a stereo power amplifier, such as the Primare A35.2, on balanced or unbalanced inputs
  • Balanced sources such as the CD35 CD player, and phono preamplifiers such as the R35
  • Systems that will add digital inputs and network streaming later
  • Multi-channel home theatre systems, passing the front channels through at fixed gain
  • Custom installations with RS232, IR and 12 V trigger control

In the box

  • PRE35 preamplifier
  • Mains cable
  • Trigger cable
  • C25 remote control with batteries
  • AC Polarity Pen

Connections

  • 2 × balanced analogue stereo inputs, XLR (A1, A2), 30 kΩ
  • 3 × unbalanced analogue stereo inputs, RCA (A3 to A5), 15 kΩ
  • 2 × balanced preamplifier outputs, XLR (PRE2, PRE3), 380 Ω
  • 1 × preamplifier output, RCA (PRE1), 100 Ω
  • 1 × line output (LINE, fixed level), RCA, 100 Ω
  • RS232 outboard system control port
  • IR in and IR out, 3.5 mm
  • 12 V trigger out, 3.5 mm
  • Mains inlet with power switch on the back panel

Finishes

  • Black (PRE35-BLACK)
  • Titanium (PRE35-TITANIUM)

Primare PRE35: frequently asked questions

How do I connect the PRE35 to a power amplifier?

If the power amplifier has balanced inputs, such as the Primare A35.2, connect the PRE2 or PRE3 left and right outputs to them with high-quality XLR cables. If it has only unbalanced inputs, use the PRE1 left and right RCA outputs with high-quality RCA cables.

Can I add digital inputs and streaming later?

Yes. The PRE35 is modular: the DM36 digital-to-analogue converter module and the SM35 Prisma network player module can be added either at the time of purchase or at a later date. The SM35 needs a DAC module, so the DM36 comes first.

Which sources can I connect?

Up to two balanced sources on XLR inputs A1 and A2, such as the Primare CD35 CD player, and up to three unbalanced sources on RCA inputs A3 to A5, such as a phono preamplifier or a streamer with analogue outputs. Each input can be renamed and its level matched with input gain.

Can the PRE35 be used in a home theatre system?

Yes. Any input can be set to fixed gain (0 dB, equivalent to volume setting 66). This works as a surround sound pass-through, so the front left and right channels of a multi-channel system pass through the PRE35 to the power amplifier at a level set by the processor.

How do I get the best sound from the PRE35?

Use the supplied AC Polarity Pen to make sure the live pin of the mains cable goes to the left-hand pin of the power connector, viewed from the back. The PRE35 starts to sound its best after a burn-in of about 24 hours, with a further smaller improvement over at least another three days of playing. Leave at least 50 mm of free space around the sides and top for ventilation.

Where can I buy the Primare PRE35 in India?

The Primare PRE35 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Separates with an A35.2 power amplifier

Listeners building a preamplifier and power amplifier system in a dedicated listening room.

Connections

ConnectTo
PRE35 PRE2 XLR outputsA35.2 balanced inputs
PRE35 TRIG OUTA35.2 TRIG IN (supplied trigger cable)
A35.2 speaker outputsPair of passive loudspeakers

Setup

  1. Place both units on a rack made for audio equipment, with at least 50 mm of space around the sides and top.
  2. Connect the PRE2 left and right outputs to the power amplifier's balanced inputs with high-quality XLR cables.
  3. Run the trigger cable from the PRE35 TRIG OUT to the power amplifier's TRIG IN so it follows the preamplifier on and to standby.
  4. Check the mains plugs with the AC Polarity Pen and switch on at the back panels.
  5. Select a source and set the volume with the signature control knob.

Tip: For a power amplifier with only unbalanced inputs, use the PRE1 RCA outputs.

Workflow 2: CD35 and PRE35

Music lovers pairing the PRE35 with a Primare CD player.

Connections

ConnectTo
CD35 XLR outputsPRE35 balanced input A1
PRE35 TRIG OUTCD35 TRIG IN (supplied trigger cable)
PRE35 PRE outputsPower amplifier

Setup

  1. Connect the CD35 to balanced input A1 with high-quality XLR cables.
  2. Give A1 the alias CD so the display names the source.
  3. Connect the trigger cable from the PRE35 TRIG OUT to the CD35 TRIG IN.
  4. The CD35 now switches on, or to standby, when the standby button of the PRE35 is pressed.

Tip: Set INPUT GAIN so the CD plays at the same level as the other sources.

Workflow 3: Vinyl with the R35

Record collectors adding a turntable to a Primare separates system.

Connections

ConnectTo
R35 XLR outputsPRE35 balanced input A2
PRE35 TRIG OUTR35 TRIG IN; R35 TRIG OUT to the next Primare product

Setup

  1. Connect the R35 XLR outputs to balanced input A2 with XLR cables.
  2. Give A2 the alias PHONO and match its level with INPUT GAIN.
  3. Run the trigger from the PRE35 TRIG OUT to the R35 TRIG IN and daisy-chain onwards from the R35 TRIG OUT.
  4. If DECREASE INPUT GAIN appears, lower the gain until the warning clears.

Tip: Disable unused inputs with STATUS so only the sources in use are offered.

Workflow 4: Stereo and home theatre on one system

Home theatre owners who want the front loudspeakers to serve both films and music.

Connections

ConnectTo
AV processor front left / right pre-outsPRE35 analogue input set to FIXED
PRE35 PRE outputsPower amplifier for the front loudspeakers

Setup

  1. Connect the processor's front left and right pre-outs to one PRE35 input.
  2. Set VOLUME for that input to FIXED (0 dB, equivalent to volume 66) and confirm the loud-volume warning.
  3. The processor now sets the level of the front channels for films.
  4. Keep the other inputs variable for stereo listening through the PRE35 volume control.

Tip: Fixed gain overrules MAXIMUM VOLUME, so set the processor levels before playing.

Workflow 5: Living-room TV sound

Families who want the TV and music through the same hi-fi system.

Connections

ConnectTo
TV with an analogue audio outputPRE35 unbalanced input A3 (RCA)
PRE35 PRE outputsPower amplifier and loudspeakers

Setup

  1. Connect the TV's analogue output to input A3 and name it TV.
  2. Set AUTO SENSE for A3 to WAKE+SELECT.
  3. The PRE35 now wakes from standby and selects the TV when sound arrives.
  4. Set DEFAULT VOLUME to a comfortable start-up level.

Tip: AUTO-STANDBY returns the PRE35 to standby after 10, 15 or 20 minutes without signal or use.

Workflow 6: Custom-installed system with central control

Installers and owners of whole-home and media-room systems.

Connections

ConnectTo
Controller systemPRE35 RS232 port (null modem cable)
PRE35 TRIG OUTTRIG IN of the power amplifier
IR distributionPRE35 IR IN / IR OUT (3.5 mm)

Setup

  1. Connect the controller to the RS232 port with a twisted (null modem) cable.
  2. Run the trigger cable from TRIG OUT so the power amplifier follows the PRE35 on and to standby.
  3. Use IR in and IR out for wired IR control of equipment in a cabinet.
  4. Lock the front panel in GENERAL SETTINGS if needed.

Tip: The C25 remote also operates the other Primare products in the system through its AMP, CD and PRE modes.

Request a Quote

PRIMARE PRE35

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›