





PRIMARE PRE35 DAC
PRICE ON ENQUIRY
Primare PRE35 DAC balanced preamplifier: XLR and RCA inputs and outputs, DM36 DAC with optical, coaxial and USB-B inputs, MQA. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Preamplifier
| Type | Modular balanced stereo preamplifier with DM36 DAC module, 35 Series |
| Circuit | Fully balanced analogue preamplification, four-layer main board |
| Optional module | SM35 Prisma network player module |
Analogue inputs and outputs
| Balanced inputs | 2 × XLR stereo pair (A1, A2), 30 kΩ impedance |
| Unbalanced inputs | 3 × RCA stereo pair (A3 - A5), 15 kΩ impedance |
| Preamplifier outputs, XLR | 2 × stereo pair (PRE2, PRE3), 380 Ω impedance |
| Preamplifier output, RCA | 1 × stereo pair (PRE1), 100 Ω impedance |
| Line output | 1 × RCA stereo pair (LINE, fixed level), 100 Ω impedance |
Digital (DM36 module)
| Optical inputs | 4 × optical (D6 - D9), up to 192 kHz / 24-bit |
| Coaxial inputs | 2 × RCA (D10, D11), up to 192 kHz / 24-bit |
| USB input | 1 × USB-B (input 12), up to 384 kHz / 32-bit; DSD256 (11.2 MHz) |
| Digital output | 1 × coaxial RCA: digital inputs at their native format; analogue inputs selectable 48 or 96 kHz |
| PCM up-sampling | 44.1 / 48 kHz to 88.2 / 96 kHz, on or off |
| MQA | Full MQA processing; MQA and MQA Studio shown on the display |
| DAC frequency response | 44.1 kHz: +0.1 / -0.4 dB; 48 / 96 / 192 kHz: +0.1 / -0.2 dB (20 Hz - 20 kHz) |
Performance
| Gain, preamplifier output | RCA in / RCA out 16.5 dB; XLR in / XLR out 16.5 dB; RCA in / XLR out 22.5 dB; XLR in / RCA out 10.5 dB |
| Gain, line output | 0 dB |
| Analogue frequency response | 20 Hz - 20 kHz: ± 0.1 dB |
| Distortion, THD + N | < 0.002 %, 20 Hz - 20 kHz |
| Signal to noise | > 100 dB (AES17 filter) |
Control
| Remote control | C25 system remote control (IR) |
| RS232 | Outboard system control port |
| IR | 3.5 mm input / output |
| 12 V trigger | 3.5 mm output |
General
| Display | OLED |
| Power supply | Linear supply in operation; switch-mode supply for standby only |
| Power consumption | Standby < 0.3 W; operating 33 W < 50 W |
| Dimensions (W × D × H) | 430 × 420 × 106 mm with knobs and connectors; 430 × 382 × 106 mm without knobs and connectors |
| Weight | 11.3 kg |
| Colour | Black or titanium |
Versions
| PRE35-DAC-BLACK | Black |
| PRE35-DAC-TITANIUM | Titanium |
Product overview
The Primare PRE35 DAC is the PRE35 modular balanced stereo preamplifier with the DM36 digital-to-analogue converter module installed: fully balanced analogue preamplification with XLR and RCA inputs and outputs, plus a full-featured DAC stage for PCM up to 384 kHz / 32-bit and DSD256 with MQA processing. The SM35 Prisma network player module can be added at any time.
The PRE35 DAC is an exceptional system control centre, providing unprecedented low-noise, distortion-free selection and transmission of any analogue input. Its carefully crafted, fully balanced circuit design benefits from a four-layer main board for the shortest possible signal path; the inputs are switched by relays for better isolation and sound than conventional CMOS switches, and a 2 × 4 channel balanced-mode volume control IC gives optimal channel balance and performance at low listening levels.
In normal operation the audio circuits run from a linear power supply: a switch-mode supply is used only in standby and turns completely off when the linear supply takes over, so the power is clean and noise-free. Two balanced XLR and three RCA inputs are matched by two pairs of balanced XLR preamplifier outputs, an RCA preamplifier output and a fixed-level RCA line output, so the PRE35 DAC connects to a power amplifier with balanced or unbalanced inputs, and the line output feeds active speakers or an analogue recorder.
The DM36 is a completely new, thoroughly designed digital-to-analogue converter that improves on its predecessor, the DM35, with a sound that is more richly detailed and lifelike and more precise three-dimensionality within a larger soundstage. Four optical and two coaxial inputs accept up to 192 kHz / 24-bit, the USB-B input connects a computer at up to 384 kHz / 32-bit and DSD256, and a coaxial output passes the digital signal on. PCM up-sampling raises 44.1 and 48 kHz audio to 88.2 and 96 kHz, and full MQA processing includes MQA CD playback from the CD15 Prisma, DD15, CD35 Prisma and DD35 over an optical or coaxial connection, with MQA or MQA Studio shown on the OLED display.
Modular by design, the PRE35 DAC can take the SM35 Prisma network player module at any time, adding network streaming with multi-room and multi-zone playback managed from the Prisma app. Its look and feel follow Scandinavian design: simple and elegant, with approachable functionality and the signature control knob, known for its appearance and for how it feels in the hand as an input is selected or the volume adjusted. Primare calls it lagom: not too much, not too little, everything in balance, proportion and harmony.
| THD + N, 20 Hz - 20 kHz | < 0.002 % |
| PCM via USB-B, plus DSD256 | 384 kHz / 32-bit |
| Preamplifier outputs, plus LINE | 2 × XLR + 1 × RCA |
| 4 optical, 2 coaxial, 1 USB-B | 7 digital inputs |
Key features
- Fully balanced analogue preamplifier with a four-layer main board for the shortest possible signal path
- DM36 DAC module installed: PCM up to 384 kHz / 32-bit and DSD256 via USB-B, PCM up-sampling and full MQA processing
- Two XLR and three RCA analogue inputs
- Two pairs of XLR and one pair of RCA preamplifier outputs, plus a fixed-level RCA line output
- Four optical and two coaxial digital inputs, up to 192 kHz / 24-bit; coaxial digital output
- USB-B input to use the preamplifier as a computer's sound output device
- Linear power supply in operation; the switch-mode standby supply turns completely off
- Relay input switching and a 2 × 4 channel balanced-mode volume control IC
- THD + N < 0.002 % and frequency response ± 0.1 dB, 20 Hz - 20 kHz
- OLED display with MQA and MQA Studio indication; auto sense, input aliases, input gain and fixed gain
- C25 system remote control, RS232, IR in / out and 12 V trigger out
- Ready for the SM35 Prisma network player module; Scandinavian design in black or titanium
Made for
- Separates systems with a stereo power amplifier, such as the Primare A35.2, on balanced or unbalanced inputs
- Living rooms where a TV, a computer and a CD player share one control centre
- Primare CD sources such as the DD35 and CD35 Prisma, including MQA CD playback
- Multi-channel home theatre systems, passing the front channels through at fixed gain
- Custom installations with RS232, IR and 12 V trigger control
In the box
- PRE35 DAC preamplifier
- Mains cable
- Trigger cable
- C25 remote control with batteries
- AC Polarity Pen
Connections
- 2 × balanced analogue stereo inputs, XLR (A1, A2), 30 kΩ
- 3 × unbalanced analogue stereo inputs, RCA (A3 to A5), 15 kΩ
- 2 × balanced preamplifier outputs, XLR (PRE2, PRE3), 380 Ω
- 1 × preamplifier output, RCA (PRE1), 100 Ω
- 1 × line output (LINE, fixed level), RCA, 100 Ω
- 4 × optical digital inputs (D6 to D9), up to 192 kHz / 24-bit
- 2 × coaxial digital inputs, RCA (D10, D11), up to 192 kHz / 24-bit
- 1 × USB-B computer input (input 12), up to 384 kHz / 32-bit and DSD256
- 1 × coaxial digital output, RCA
- RS232, IR in and IR out (3.5 mm), 12 V trigger out (3.5 mm)
- Mains inlet with power switch on the back panel
Finishes
- Black (PRE35-DAC-BLACK)
- Titanium (PRE35-DAC-TITANIUM)
Primare PRE35 DAC: frequently asked questions
How do I connect the PRE35 DAC to a power amplifier?
If the power amplifier has balanced inputs, such as the Primare A35.2, connect the PRE2 or PRE3 left and right outputs to them with high-quality XLR cables. If it has only unbalanced inputs, use the PRE1 left and right RCA outputs with high-quality RCA cables.
What does the DM36 module add to the PRE35?
A full-featured digital-to-analogue converter stage: four optical and two coaxial digital inputs (up to 192 kHz / 24-bit), a USB-B computer input (up to 384 kHz / 32-bit and DSD256), a coaxial digital output, PCM up-sampling and full MQA processing. The balanced analogue circuitry, inputs, outputs and controls are those of the PRE35.
Can I connect a computer to the PRE35 DAC?
Yes. Connect the computer to the USB-B input with a USB-A to USB-B cable and select input 12; the preamplifier then appears as a sound output device called Primare USB Audio DAC. Some computers need the Primare USB audio driver from primare.net; others need no driver. Set STANDBY MODE to NORMAL if the preamplifier should wake from the computer input.
Does the PRE35 DAC play MQA?
Yes. The DM36 module provides full MQA processing, and MQA CD playback is supported from the Primare CD15 Prisma, DD15, CD35 Prisma and DD35 over an optical or coaxial connection. The OLED display shows MQA, or MQA. for MQA Studio.
Can I add network streaming later?
Yes. The SM35 Prisma network player module can be added at any time, adding network streaming with multi-room and multi-zone playback managed from the Prisma app. With both the DM36 and SM35 installed, the PRE35 Prisma also offers wireless loudspeaker connectivity.
Where can I buy the Primare PRE35 DAC in India?
The Primare PRE35 DAC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Separates with an A35.2 power amplifier
Listeners building a preamplifier and power amplifier system in a dedicated listening room.
Connections
| Connect | To |
|---|---|
| PRE35 DAC PRE2 XLR outputs | A35.2 balanced inputs |
| PRE35 DAC TRIG OUT | A35.2 TRIG IN (supplied trigger cable) |
| A35.2 speaker outputs | Pair of passive loudspeakers |
Setup
- Place both units on a rack made for audio equipment, with at least 50 mm of space around the sides and top.
- Connect the PRE2 left and right outputs to the power amplifier's balanced inputs with high-quality XLR cables.
- Run the trigger cable from the PRE35 DAC TRIG OUT to the power amplifier's TRIG IN so it follows the preamplifier on and to standby.
- Check the mains plugs with the AC Polarity Pen and switch on at the back panels.
- Select a source and set the volume with the signature control knob.
Tip: For a power amplifier with only unbalanced inputs, use the PRE1 RCA outputs.
Workflow 2: TV and computer in the living room
Families who play TV sound, films and computer music through one hi-fi system.
Connections
| Connect | To |
|---|---|
| TV optical digital output | PRE35 DAC optical input D6 |
| Computer USB port | PRE35 DAC USB-B input (input 12) |
| PRE35 DAC PRE outputs | Power amplifier |
Setup
- Connect the TV's optical output to D6 and give the input the alias TV.
- Set AUTO SENSE for D6 to WAKE+SELECT so the system wakes when the TV plays.
- Connect the computer to the USB-B input and choose Primare USB Audio DAC as its sound output device.
- Set STANDBY MODE to NORMAL so the preamplifier can also wake from the computer input.
Tip: Some computers need the Primare USB audio driver from primare.net.
Workflow 3: CD with MQA from a DD35
CD collectors who want a dedicated transport feeding the DM36 DAC.
Connections
| Connect | To |
|---|---|
| DD35 COAXIAL digital out | PRE35 DAC coaxial input D10 |
| PRE35 DAC TRIG OUT | DD35 TRIG IN |
Setup
- Connect the DD35 coaxial output to coaxial input D10 with a digital RCA cable.
- Give D10 the alias CD.
- Link the PRE35 DAC TRIG OUT to the DD35 TRIG IN with the trigger cable.
- Play a disc: MQA CDs are recognised and the display shows MQA or MQA. for MQA Studio.
Tip: PCM up-sampling raises CD audio from 44.1 kHz to 88.2 kHz for conversion; it can be switched off in AUDIO SETTINGS.
Workflow 4: Stereo and home theatre on one system
Home theatre owners who want the front loudspeakers to serve both films and music.
Connections
| Connect | To |
|---|---|
| AV processor front left / right pre-outs | PRE35 DAC analogue input set to FIXED |
| PRE35 DAC PRE outputs | Power amplifier for the front loudspeakers |
Setup
- Connect the processor's front left and right pre-outs to one PRE35 DAC input.
- Set VOLUME for that input to FIXED (0 dB, equivalent to volume 66) and confirm the loud-volume warning.
- The processor now sets the level of the front channels for films.
- Keep the other inputs variable for stereo listening through the PRE35 DAC volume control.
Tip: Fixed gain overrules MAXIMUM VOLUME, so set the processor levels before playing.
Workflow 5: Vinyl with the R35
Record collectors adding a turntable to a Primare separates system.
Connections
| Connect | To |
|---|---|
| R35 XLR outputs | PRE35 DAC balanced input A1 |
| PRE35 DAC TRIG OUT | R35 TRIG IN; R35 TRIG OUT to the next Primare product |
Setup
- Connect the R35 XLR outputs to balanced input A1 with XLR cables.
- Give A1 the alias PHONO and match its level with INPUT GAIN.
- Run the trigger from the PRE35 DAC TRIG OUT to the R35 TRIG IN and daisy-chain onwards from the R35 TRIG OUT.
- If DECREASE INPUT GAIN appears, lower the gain until the warning clears.
Tip: Disable unused inputs with STATUS so only the sources in use are offered.
Workflow 6: Custom-installed system with central control
Installers and owners of whole-home and media-room systems.
Connections
| Connect | To |
|---|---|
| Controller system | PRE35 DAC RS232 port (null modem cable) |
| PRE35 DAC TRIG OUT | TRIG IN of the power amplifier |
| IR distribution | PRE35 DAC IR IN / IR OUT (3.5 mm) |
Setup
- Connect the controller to the RS232 port with a twisted (null modem) cable.
- Run the trigger cable from TRIG OUT so the power amplifier follows the preamplifier on and to standby.
- Use IR in and IR out for wired IR control of equipment in a cabinet.
- Lock the front panel in GENERAL SETTINGS if needed.
Tip: The C25 remote also operates the other Primare products in the system through its AMP, CD and PRE modes.








