SCHOEPS RG 12

Product overview

The SCHOEPS RG 12 is a stand connector that joins two STR vertical support rods, or any other rods of 12 mm diameter, at an adjustable angle.

The angle between the two rods may be adjusted over a wide range, so a vertical rod and an angled rod form a simple boom.

With a CMC microphone fixed at the end and no counterweight, the maximum recommended length of the angled rod is approximately 50 cm.

Key features

• Connects two vertical support rods (STR) or any 12 mm rods
• Angle adjustable over a wide range
• Up to approx. 50 cm angled rod with a CMC at the end, without counterweight

Made for

• Building booms from STR rods
• Angled microphone positions on stands

In the box

• RG 12 stand connector

SCHOEPS RG 12: frequently asked questions

What does the RG 12 connect?

Two STR vertical support rods or any other rods of 12 mm diameter.

How long can the angled rod be?

With a CMC fixed at the end and no counterweight, approximately 50 cm is the maximum recommended length.

Is there a version for other rods?

SCHOEPS also offers the RG 8 swivel joint.

Where can I buy the SCHOEPS RG 12 in India?

The SCHOEPS RG 12 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Simple boom from two rods

Engineers building compact booms.

Connections

Setup

1. Fit the RG 12 on the vertical rod.
2. Insert the second rod and set the angle.
3. Mount the CMC at the end of the angled rod, up to approx. 50 cm without counterweight.

Tip: Keep the angled rod within about 50 cm for a CMC without counterweight.

Workflow 2: Angled microphone position

Users placing a microphone off-axis from a stand.

Connections

Setup

1. Join the two 12 mm rods with the RG 12.
2. Adjust the angle.
3. Tighten and aim the microphone.

Tip: Works with any 12 mm rods, not only STR.