SCHOEPS TC, TC 2, T 20

Product overview

The SCHOEPS TC, TC 2 and T 20 are elegant miniature table stands with variable inclination and insulation from solid-borne sound.

They can be used unobtrusively. Hanging the cable in the wire eyelet between the pins and the bottom plate gives an elegant cable routing. The stands can also be operated without the vertical spacer when the microphone should sit close to the table, and the 3/8" table flange F 5 is suitable for a fixed installation.

The TC comes with the SGC 8 mm stand clamp for KC active cables and CCM microphones, and the T 20 with the SG 20 20 mm stand clamp for the CMC 1. The TC 2 is the dual version of the TC, for redundant miking or for aligning two microphones in different directions; it can also be used without its base plate as a double microphone mount on a stand.

Each stand weighs 195 g, the base is 57 mm in diameter, the finish is matte grey and the head swivels through ±100°.

Key features

• Miniature table stand with variable inclination
• Insulation from solid-borne sound
• Wire eyelet for elegant cable routing
• Usable without the vertical spacer, close to the table
• Head swivel ±100°
• 195 g, 57 mm diameter, matte grey

Made for

• Conference and video conferencing (CMC 1 Table Set)
• Unobtrusive table microphones with CCM microphones or KC cables
• Redundant miking or two directions with the TC 2

In the box

• Miniature table stand
• TC: SGC stand clamp (8 mm)
• T 20: SG 20 stand clamp (20 mm)
• Needed: microphone (CCM, CMC 1 with capsule, or capsule on KC), not included

SCHOEPS TC, TC 2, T 20: frequently asked questions

What is the difference between TC, TC 2 and T 20?

The TC has the SGC 8 mm clamp for KC and CCM, the T 20 has the SG 20 20 mm clamp for the CMC 1, and the TC 2 is the dual version of the TC for two microphones.

Can I install it permanently on a table?

Yes. The 3/8" table flange F 5 is suitable for a fixed installation at the table.

How do I keep the cable tidy?

Hang the cable in the wire eyelet between the pins and the bottom plate.

Can the TC 2 be used on a stand?

Yes. Without its base plate it works as a double microphone mount on a stand.

Where can I buy the SCHOEPS TC, TC 2, T 20 in India?

The SCHOEPS TC, TC 2, T 20 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Table microphone for conferences

Meeting rooms, video conferencing and podcasts.

Connections

Setup

1. Clip the microphone into the SGC clamp.
2. Set the inclination towards the speaker.
3. Hang the cable in the wire eyelet.
4. Connect to the input.

Tip: The CMC 1 Table Set is the ready-made SCHOEPS set for conferences.

Workflow 2: Two microphones on one base

Redundant recordings and two-direction pickup.

Connections

Setup

1. Fit both microphones in the TC 2 clamps.
2. Aim them in the same or in different directions.
3. Run both cables to separate inputs.

Tip: Without its base plate, the TC 2 doubles as a two-microphone mount on a stand.