SEETRONICS SE8FDP
MRP - Rs. 1,278
SEETRONICS SE8FDP D-shape RJ45 feedthrough panel connector, nickel plated metal flange, rear panel mount, CAT5e, RJ45 front and rear. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Product and electrical
| Connection type | RJ45 |
| Gender | Female |
| Contact resistance | < 10 mΩ |
| Rated current per contact | 0.5 A |
| Rated voltage | 50 V |
| Insulation resistance | ≥ 0.5 GΩ |
| Dielectric strength | 1 kV DC |
| Frequency range | 1‑100 MHz |
| Transmission performance | CAT5e |
Mechanical
| Insertion force | ≤ 40 N |
| Service life | > 1000 mating cycles |
| Locking device | Latch lock |
Material and environmental
| Contacts | Copper alloy |
| Contact surface | Au |
| Insert | PBT |
| Housing | Zinc alloy |
| Housing plating | Ni |
| Temperature range | -30 °C to +80 °C |
| Standards | TIA / EIA 568B; ISO / IEC 11801 |
Installation and packaging
| Panel fixing | M2.6 screws, 0.4 Nm, clockwise |
| Panel thickness | 1.5‑4 mm |
| Unit | 1 pc per bag |
| Inner carton | 50 pcs |
| Master carton | 5 inner cartons, 250 pcs |
| Accessory | Screws |
Product overview
The SEETRONICS SE8FDP is a D-shape RJ45 feedthrough panel connector with a uniform nickel plated metal flange and the standard D-style installation size.
It is installed from the rear of the panel and its rear end is a feedthrough RJ45, so patch cables plug in at the front and the rear without field termination. Fast locking and unlocking at front and rear give reliable, continuous signal transmission under moving conditions, and it conforms to CAT5e as defined by TIA / EIA 568B and ISO / IEC 11801.
| 1‑100 MHz | CAT5e |
| Standard installation size | D‑shape |
| Per contact | 0.5 A |
| Mating cycles | > 1000 |
Key features
- D-shape panel connector with uniform metal flange and standard D-style installation size
- Installed from the rear of the panel
- The rear end is a feedthrough RJ45
- Conforms to CAT5e (TIA / EIA 568B, ISO / IEC 11801)
- Fast locking and unlocking at front and rear for stable transmission under moving conditions
Installation
- Loosen the screws and separate the panel cover part from the base part
- Place the cover part on the front of the panel and the base part on the back
- Tighten the M2.6 screws clockwise with 0.4 Nm (panel thickness 1.5-4 mm)
In the box
- 1 x SE8FDP RJ45 feedthrough connector with screws
SEETRONICS SE8FDP: frequently asked questions
How is it mounted?
From the rear of the panel: cover part in front, base part behind, M2.6 screws at 0.4 Nm, panels 1.5 to 4 mm.
Do I need to terminate cables?
No. Both ends are RJ45, so standard patch cables plug into the front and rear.
Which category does it support?
CAT5e, 1 to 100 MHz.
Where can I buy the SEETRONICS SE8FDP in India?
The SEETRONICS SE8FDP is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Rack and stage box network ports
Adding RJ45 ports to racks, stage boxes and broadcast panels.
Connections
| Connect | To |
|---|---|
| Patch cable | SE8FDP front |
| Rear patch cable | SE8FDP rear |
Setup
- Prepare the D-size cut-out.
- Split cover and base.
- Clamp the panel and tighten M2.6 screws to 0.4 Nm.
- Plug in front and rear.
Tip: Panels 1.5 to 4 mm thick.
Workflow 2: Mobile productions
Network links that move during shows.
Connections
| Connect | To |
|---|---|
| Device | SE8FDP |
Setup
- Mount the feedthrough.
- Connect the internal patch.
- Plug in the field cable.
- Check the latch.
Tip: Fast locking front and rear.
