SONODYNE SYNC 3002

Product overview

The SONODYNE SYNC 3002 is the delegate base unit of the SYNC IP based digital conference system, with a 2.23 inch OLED display, illuminated touch controls, voting and earphone monitoring.

The SYNC 3002 is the base of the delegate conference unit: the SYNC 2001 (500 mm) or SYNC 2002 (420 mm) gooseneck microphone screws onto it to form the complete unit. It is powered by the SYNC 1001 controller over a T-type 8 core cable shielded by full-line aluminium foil, and its hand in hand connection supports hot plugging for easy installation and maintenance. Up to 180 conference units connect with the SYNC 4001 power extender, and up to 1000 with a separate data extender.

Key features

• Touch type illuminated switches: microphone switch bright green in standby, bright red when on
• 2.23 inch bright full-view OLED display for voting, voting mode, unit parameters, date and time, speaking and monitoring volume
• Voting through the digital base
• Headphone output and volume adjustment buttons on the side
• Service buttons for requesting tea, coffee, pen, paper and more
• Powered by the SYNC 1001; T-type 8 core connection with hot plugging
• Interference suppression against mobile phones

Speaking and requesting to speak

The SYNC 1001 sets how delegates speak: FIFO, APPLY, FREE, LIMIT or VOICE. In APPLY mode a delegate's request waits, shown by the green light ring of the gooseneck, until the chairman unit approves it; the ring then glows red and the microphone is live. The controller can limit how many delegates speak at once and for how long.

Microphone

With the SYNC 2001 or SYNC 2002 fitted, the delegate unit uses a professional high-fidelity condenser microphone with a cardioid capsule (-46 dBV/Pa), 20 Hz - 20 kHz, 2 kΩ input impedance and 125 dB SPL.

In the box

• SYNC 3002 delegate base unit

SONODYNE SYNC 3002: frequently asked questions

Does the SYNC 3002 include a microphone?

No. It is the delegate base only; the SYNC 2001 (500 mm) or SYNC 2002 (420 mm) gooseneck microphone screws onto it.

What is the difference from the SYNC 3001?

The SYNC 3001 is the chairman unit, with a priority button and the function of approving delegates' speech requests. The SYNC 3002 is the delegate unit.

Can delegates vote?

Yes. Voting runs through the digital base, and the display shows the voting and voting mode.

Where can I buy the SONODYNE SYNC 3002 in India?

The SONODYNE SYNC 3002 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Delegate seats in a boardroom

Boardrooms and meeting rooms.

Connections

Setup

1. Screw a gooseneck onto each SYNC 3002.
2. Chain the units on the 8 core T-cable from the SYNC 1001.
3. Number every unit once with Edit ID on the controller.

Tip: Hand in hand connection supports hot plugging.

Workflow 2: Requesting to speak

Meetings run in APPLY mode.

Connections

Setup

1. Press the microphone button on the SYNC 3002.
2. The ring glows green while the request waits.
3. The ring glows red when the chairman approves.

Tip: The chairman unit approves requests.

Workflow 3: Free discussion

Workshops and open discussions.

Connections

Setup

1. Set FREE mode for up to 20 open microphones, or VOICE mode.
2. Delegates switch on with the touch button or simply speak (VOICE).
3. Adjust speak volume from the controller.

Tip: The microphone switch is green in standby and red when on.

Workflow 4: Voting

Committees, councils and assemblies.

Connections

Setup

1. The chairman starts the vote.
2. Each delegate votes on the base.
3. The display shows voting and voting mode.

Tip: Voting needs no external computer.

Workflow 5: Monitoring with headphones

Delegates who want to hear the meeting clearly.

Connections

Setup

1. Plug headphones into the side socket.
2. Set the level with the volume buttons.
3. The display shows the monitoring volume.

Tip: Earphone load > 10 Ω, 10 mW.

Workflow 6: Large halls

Halls with up to 180 delegates.

Connections

Setup

1. Group the delegate units on the SYNC 4001 outputs.
2. Connect the extenders to the SYNC 1001.
3. Set the speak mode and speak number.

Tip: Up to 180 conference units with the SYNC 4001.