TELEFUNKEN M82

Product overview

The TELEFUNKEN M82 is a robust end-address large-diaphragm dynamic microphone from the TELEFUNKEN Dynamic Series, designed with kick drum and broadcast vocals in mind and fitted with two independent onboard EQ switches.

Its large dynamic diaphragm has superb low-frequency capability for fat, punchy kick drum tones, while the KICK EQ and HIGH BOOST switches let you tailor the response to the source with ease. That makes the M82 equally suited to vocals, percussion, guitar and bass amplifiers, organ and brass instruments, as well as broadcast and podcast voice. Each M82 is hand assembled and tested in TELEFUNKEN's American facility.

Key features

• Large-diaphragm 32 mm dynamic capsule with superior low-frequency definition
• Balanced mid and high-frequency response that adds clarity and intelligibility
• Independently switchable two-band EQ: KICK EQ mid cut and HIGH BOOST
• Four distinct EQ curves to match the microphone to the source
• Very high SPL handling: 146 dB SPL for 1% THD
• End-address design for easy positioning on most sound sources
• Cardioid polar pattern
• Designed and hand assembled in the USA

Large-diaphragm low end

The 32 mm dynamic moving-coil capsule reaches down to 25 Hz, giving kick drums and bass cabinets real weight and definition, while the balanced mid and high-frequency response keeps attack and articulation clear. With 146 dB SPL handling, the M82 stays clean inside a kick drum or right on a loud speaker.

KICK EQ and HIGH BOOST switches

KICK EQ is a low-midrange notch filter with a 6 dB cut at 350 Hz that removes the boxy character of a kick drum and adds definition; it also helps bass amps or any source that needs a cleaner low midrange. HIGH BOOST engages a slow-rising shelf starting around 2 kHz that opens the top end by 6 dB at 10 kHz for added presence. Because the switches work independently, the M82 offers four distinct responses.

Broadcast and podcast voice

With HIGH BOOST on and KICK EQ off, TELEFUNKEN recommends the M82 for broadcast voice. The large diaphragm gives speech a full, warm body and the high-frequency lift adds intelligibility. The end-address design makes it natural to speak straight into, and the optional M 788 Podcast Microphone Boom Arm suits desk set-ups.

End-address design

You address the M82 from its end, like a handheld microphone, so it is quick to aim into a kick drum port, at a speaker cone or at a presenter. The 155 mm, 434 g body is mounted with the included M 782 stand mount and connects with the included SGMC-5R 5-metre right-angle XLR cable.

One microphone, many sources

Beyond kick drum and voice, TELEFUNKEN lists clear EQ recommendations for a wide range of sources. Leave both switches off for vocals, clean electric guitar, brass and woodwind. Use HIGH BOOST alone for distorted guitar amps and mallet-based percussion. Use KICK EQ alone for a bass cabinet or the bottom of an organ rotating-speaker cabinet, and both switches together for floor and rack toms. This flexibility makes the M82 a dependable workhorse in the studio and on stage.

Versions and sets

• M82 (SYTM-065): the microphone with the M 782 stand mount, SGMC-5R 5-metre right-angle XLR cable and ZB82 zipper bag

In the box

• TELEFUNKEN M82 dynamic microphone
• M 782 Stand Mount
• SGMC-5R 5-metre right-angle XLR cable
• ZB82 Microphone Zipper Bag

TELEFUNKEN warranty: 90 days on the capsule, extended to one year when the microphone is registered with TELEFUNKEN; Dynamic Series warranties are fully transferable between owners. Optional accessory: M 788 Podcast Microphone Boom Arm.

TELEFUNKEN M82: frequently asked questions

Which EQ setting should I use for kick drum?

TELEFUNKEN suggests KICK EQ on with HIGH BOOST off for a vintage kick sound, and both switches on for a modern kick sound or a kick drum with a resonant head.

Can the M82 be used for podcasts and broadcast?

Yes. Broadcast and podcast vocals are among its recommended applications; TELEFUNKEN suggests HIGH BOOST on and KICK EQ off for broadcast voice.

Does the M82 need phantom power?

No. It is a dynamic moving-coil microphone and works from any standard mic input.

What else is the M82 suited for?

Bass and guitar amps, floor and rack toms, vocals, clean electric guitar, brass and woodwind, mallet percussion and organ cabinets, using the EQ settings TELEFUNKEN recommends.

Where can I buy the TELEFUNKEN M82 in India?

The TELEFUNKEN M82 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Kick drum

Kick drum on stage and in the studio, the source the M82 was designed for.

Connections

Setup

1. Thread the M82 onto the included M 782 stand mount and fit it to a microphone stand.
2. Connect the SGMC-5R right-angle cable from the M82 to the stage box, console or interface.
3. Aim the end of the microphone at the kick drum, through the port of the resonant head or at the batter head.
4. Choose KICK EQ on for a vintage sound, or both switches on for a modern sound, then set gain at full playing level.

Tip: The M82 handles 146 dB SPL for 1% THD, so it stays clean right at the drum.

Workflow 2: Bass cabinets

Bass guitar amplifiers, where the 25 Hz low end and KICK EQ give weight with a clear low midrange.

Connections

Setup

1. Thread the M82 onto the included M 782 stand mount and fit it to a microphone stand.
2. Connect the SGMC-5R right-angle cable to the stage box, console or interface.
3. Aim the end of the microphone at the speaker cone of the bass cabinet.
4. Switch KICK EQ on and HIGH BOOST off (TELEFUNKEN setting 3), then set gain.

Workflow 3: Guitar amps

Clean and distorted electric guitar cabinets.

Connections

Setup

1. Thread the M82 onto the included M 782 stand mount and fit it to a microphone stand.
2. Connect the SGMC-5R right-angle cable to the console or interface.
3. Aim the end of the microphone at the speaker cone.
4. Use both switches off for clean guitar, or HIGH BOOST on for distorted amps, then set gain.

Workflow 4: Broadcast and podcast voice

Presenters, podcasters and voice work, where the large diaphragm adds body to speech.

Connections

Setup

1. Mount the M82 on the M 782 stand mount, or on the optional M 788 Podcast Microphone Boom Arm.
2. Connect the SGMC-5R right-angle cable to the interface or console.
3. Switch HIGH BOOST on and KICK EQ off, as TELEFUNKEN recommends for broadcast voice.
4. Speak into the end of the microphone and set gain at normal speaking level.

Tip: Keep the presenter at a steady distance for a consistent tone.

Workflow 5: Floor and rack toms

Toms on a drum kit, using TELEFUNKEN's recommended setting 4.

Connections

Setup

1. Thread the M82 onto the included M 782 stand mount and fit it to a microphone stand.
2. Connect the SGMC-5R right-angle cable to the stage box or console.
3. Aim the end of the microphone at the drum head, clear of the sticks.
4. Switch both KICK EQ and HIGH BOOST on, then set gain while the drummer plays at full level.

Workflow 6: Brass and woodwind

Horns and reeds, listed by TELEFUNKEN under setting 1 (both switches off).

Connections

Setup

1. Thread the M82 onto the included M 782 stand mount and fit it to a microphone stand.
2. Connect the SGMC-5R right-angle cable to the console or interface.
3. Aim the end of the microphone at the bell or body of the instrument.
4. Leave both EQ switches off and set gain on the loudest passages.