










TONEWINNER AD-8300PA
PRICE ON ENQUIRY
Tonewinner AD-8300PA eleven-channel home theatre power amplifier: 3 × 300 W + 8 × 155 W into 8 Ω, XLR and RCA inputs, 5 V trigger. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Model | AD-8300PA |
| Type | Eleven-channel home theatre power amplifier |
| Channels | 11 |
| Material | Aluminium alloy |
| Colour | Black |
Amplifier
| Amplifier output (8 Ω) | 3 × 300 W + 8 × 155 W (THD 1 %, 1 kHz) |
| Rated impedance | 8 Ω (adaptable 4-8 Ω) |
| Unit gain | 29 dB |
| Current output | 45 A |
| Power supply design | Switched mode, up to 3,000 W |
Audio performance
| Signal to noise ratio | ≥ 110 dB (A-weighted) |
| THD | ≤ 0.03 % (1 kHz, normal working condition) |
| Frequency range | 10 Hz - 118 kHz (+1 / -3 dB) |
Inputs and outputs
| Inputs | 11 × RCA, 11 × XLR |
| Speaker outputs | 11 pairs of binding posts |
| Trigger | 5 V in and out |
| Protection | Five circuit protections, overcurrent protector with reset button |
| Cooling | Four fans with temperature and wind-speed control |
Power
| Mains voltage | ~110-115 V / ~220-230 V |
Physical
| Unit size | 450 × 460 × 210 mm |
| Net weight | 20 kg |
| Gross weight | 25 kg |
| Accessories | Manual, guarantee card, power cord, signal wire |
Product overview
The Tonewinner AD-8300PA is an eleven-channel high-power amplifier for home theatres, made to work with AV processors and multi-channel preamplifiers, with a high-power design for the left, right and centre channels: 3 × 300 W plus 8 × 155 W into 8 Ω.
Eleven independent Hi-Fi amplifier circuit modules, one per channel, drive a complete large home theatre from a single chassis. The front left, front right and centre channels use a high-power design rated at 300 W each into 8 Ω, while the other eight channels deliver 155 W each into 8 Ω (THD 1 %, 1 kHz), so the screen channels keep their authority in loud film scenes while surrounds, backs and height channels are fully powered too.
The circuits use classic differential designs for low distortion, low noise and a high dynamic range, and high-power transistors give up to 45 A of current output. A switched-mode power supply rated up to 3,000 W feeds all eleven channels. Signal to noise is at least 110 dB (A-weighted), unit gain is 29 dB and the frequency range runs from 10 Hz to 118 kHz (+1 / -3 dB).
Every channel has both an RCA and an XLR input, so the AD-8300PA connects to balanced or unbalanced outputs of processors and preamplifiers for movies, music, singing and gaming. A 5 V trigger in and out lets it switch on together with the rest of the system, and it has a power-off memory function.
Five types of circuit protection look after safe operation, and an overcurrent protector on the back panel guards against overcurrent, overvoltage and short circuits; after it trips, a press of its button restores the amplifier. Four fans with temperature control and wind-speed control keep the components cool for long service. Tonewinner positions the AD-8300PA as a high-end amplifier for both home theatre and Hi-Fi, at home in living rooms, custom installations, experience rooms, clubs and karaoke rooms.
| left, right and centre into 8 Ω | 3 × 300 W |
| other channels into 8 Ω | 8 × 155 W |
| signal to noise (A-weighted) | ≥ 110 dB |
| net weight | 20 kg |
Key features
- Eleven independent Hi-Fi amplifier modules, one per channel
- Amplifier output: 3 × 300 W + 8 × 155 W into 8 Ω (THD 1 %, 1 kHz)
- High-power design for the front left, front right and centre channels
- Classic differential circuits: low distortion, low noise, high dynamic range
- High-power transistors with 45 A current output
- Switched-mode power supply up to 3,000 W
- Balanced (XLR) and unbalanced (RCA) input on every channel
- 5 V trigger in and out for synchronised power-on
- Five circuit protections plus a resettable overcurrent protector on the back panel
- Four-fan air cooling with temperature and wind-speed control
- Power-off memory in the powered-on state
- Aluminium alloy cabinet, gold-plated terminals and anti-vibration feet
Made for
- AV processors and multi-channel preamplifiers
- Large home theatres such as 7.2.4 Dolby Atmos rooms
- Living rooms and dedicated cinema rooms
- Custom installations and experience rooms
- Clubs and karaoke rooms
- High-end Hi-Fi as well as home theatre
In the box
- AD-8300PA power amplifier
- Manual
- Guarantee card
- Power cord
- Signal wire
Connections
- Inputs: 11 × RCA and 11 × XLR (one of each per channel) with balanced / unbalanced selection
- Speaker outputs: 11 pairs of gold-plated binding posts
- Trigger: 5 V in and out
- Overcurrent protector with reset button
- AC power input (~110-115 V / ~220-230 V)
Tonewinner AD-8300PA: frequently asked questions
What is the AD-8300PA used for?
It is an eleven-channel power amplifier that takes the pre-outs of an AV processor or multi-channel preamplifier and powers all the speakers of a large home theatre, such as a 7.2.4 Dolby Atmos room.
How much power does each channel give?
According to the spec table, the left, right and centre channels give 300 W each and the other eight channels 155 W each into 8 Ω (THD 1 %, 1 kHz). Rated impedance is 8 Ω, adaptable to 4-8 Ω speakers.
Can I use balanced cables?
Yes. Every channel has both an XLR (balanced) and an RCA (unbalanced) input, so it works with processors that have either kind of output.
Will it switch on with my processor?
Yes. Connect the 5 V trigger output of the processor to the trigger input and the amplifier powers on and off with it; the trigger output passes the signal on to further devices.
What happens if the overcurrent protector trips?
The protector on the back panel cuts in to avoid damage from overcurrent, overvoltage or a short circuit. Check the speaker wiring, then press the protector button to restore the amplifier.
Where can I buy the Tonewinner AD-8300PA in India?
The Tonewinner AD-8300PA is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: 7.2.4 Dolby Atmos cinema room
Owners of a dedicated home cinema with eleven speakers.
Connections
| Connect | To |
|---|---|
| AV processor pre-outs (11 channels) | AD-8300PA XLR or RCA inputs |
| AD-8300PA speaker outputs | 7 ear-level and 4 height speakers |
| Processor trigger out | AD-8300PA trigger in |
Setup
- Connect the front left, front right and centre pre-outs to the high-power channels.
- Connect the surround, back and height pre-outs to the other eight channels.
- Wire each speaker to its pair of binding posts, observing + and -.
- Connect the 5 V trigger so the amplifier starts with the processor.
- Run the processor's room calibration.
Tip: Use the XLR inputs when the processor has balanced outputs.
Workflow 2: Living-room theatre with a Tonewinner processor
Families building a large living-room system.
Connections
| Connect | To |
|---|---|
| Tonewinner AV processor | AD-8300PA inputs |
| AD-8300PA | Floor-standing, centre, surround and ceiling speakers |
Setup
- Place the amplifier on a ventilated shelf near the processor.
- Run one signal cable per channel.
- Connect the speakers to the gold-plated terminals.
- Link the trigger and switch on from the processor.
Tip: Tonewinner's own living-room suggestion pairs the AD-8300PA with one of its AV processors.
Workflow 3: Karaoke cinema room
Homes and clubs that mix films and singing.
Connections
| Connect | To |
|---|---|
| Processor or karaoke mixer outputs | AD-8300PA inputs |
| AD-8300PA | Room speakers |
Setup
- Feed the main left, right and centre to the high-power channels.
- Use the remaining channels for surrounds and ceiling speakers.
- Set the levels at the processor.
- Check that all channels play before a session.
Tip: The four temperature-controlled fans keep the amplifier cool during long sessions.
Workflow 4: Custom installation rack
Installers fitting the amplifier into an equipment rack.
Connections
| Connect | To |
|---|---|
| AD-8300PA | Ventilated rack position |
| Trigger out | Next amplifier or device trigger in |
Setup
- Allow free airflow around the fans.
- Check the mains voltage marking matches the local supply.
- Chain the 5 V trigger out to other devices for synchronised start.
- Label all eleven speaker runs.
Tip: The 20 kg unit measures 450 × 460 × 210 mm; plan shelf depth accordingly.
Workflow 5: High-power stereo for Hi-Fi
Listeners who also want two-channel music from the same rack.
Connections
| Connect | To |
|---|---|
| Stereo preamplifier left / right outputs | AD-8300PA front left / right inputs |
| AD-8300PA | Main stereo speakers |
Setup
- Use the front left and right channels, rated 300 W each into 8 Ω.
- Connect balanced XLR cables where the preamplifier offers them.
- Wire the main speakers.
- Set volume on the preamplifier.
Tip: Tonewinner describes the AD-8300PA as suitable for both home theatre and Hi-Fi.
Workflow 6: Resetting after a protection trip
Anyone whose amplifier has shut down.
Connections
| Connect | To |
|---|---|
| AD-8300PA | Speakers and processor |
Setup
- Switch off and check every speaker wire for shorts.
- Check the input cables are seated.
- Press the overcurrent protector button on the back panel.
- Switch on again and play at moderate level.
Tip: The overcurrent protector is designed for fast restoration after tripping.








