TONEWINNER AT-200 product guide and data sheet cover
‹
TONEWINNER AT-200 product guide and data sheet coverTONEWINNER AT-200 data sheet page 2: Theatre and karaoke in oneTONEWINNER AT-200 data sheet page 3: ConnectionsTONEWINNER AT-200 data sheet page 4: Digital karaokeTONEWINNER AT-200 data sheet page 5: Easy Test EQTONEWINNER AT-200 data sheet page 6: EQ and set-upTONEWINNER AT-200 data sheet page 7: Control and videoTONEWINNER AT-200 data sheet page 8: Remote and musicTONEWINNER AT-200 data sheet page 9: Specifications
›

Brand: TONEWINNER

TONEWINNER AT-200

PRICE ON ENQUIRY

Category: AV Receivers & Processors | Series: AT SERIES

Tonewinner AT-200: 7.1.4 Dolby Atmos / DTS:X AV processor with digital karaoke, balanced outputs, HDMI 6-in / 2-out 4K, Easy Test EQ. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

Type7.1.4 Dolby Atmos theatre and karaoke AV processor (pre-amplifier)
Channels7.1.4 (12 channels)
Speaker layouts5.1, 5.1.2, 5.1.4, 7.1, 7.1.2, 7.1.4; up to two subwoofers
Outputs7.1.4 fully balanced (XLR) and RCA

Audio performance

SNR≥ 98 dB (A-weighted, direct mode, 1 kHz)
THD≤ 0.01 % (A-weighted)
Frequency response10 Hz - 50 kHz (+1 / -3 dB, analogue direct)
Channel separation> 80 dB (analogue direct)
Gain≥ 13 dB (analogue direct)
Maximum undistorted level≥ 2 Vrms (analogue direct)
Rated input impedance≥ 20 kΩ (analogue input)
Rated output impedance1 kΩ

Decoding and processing

Audio formatsDolby Atmos, Dolby TrueHD, Dolby Digital Plus, DTS:X, DTS-HD Master Audio, DTS Hi Res, DTS Virtual:X and earlier formats
UpmixingDolby Surround, DTS Neural:X
EQ11 bands (full-range channels), 5 bands (bass); independent EQ per input group
Bass managementIndependent crossover and slope for front, centre, surround, rear and height channels; bass enhancement
Room calibrationEasy Test EQ with ETM-2 microphone (not included)
Lip-syncUp to 1000 ms
OtherDRC dynamic range compression; audio and video matrix grouping
Karaoke7.1.4 digital karaoke; DSP reverberation; feedback exterminator; dynamic frequency shifting; anti-howling; external effects

Video

HDMI6 in, 2 out; 4K (3840 × 2160, 18 Gbps), 3D; ARC, CEC, standby pass-through; HDCP 2.2
Video formats2160p60, 1080p60 and lower; Dolby Vision, HDR10, HDR10+, HLG

Inputs and control

InputsWireless, analogue (3 stereo), optical (2), coaxial (2), USB disk, TF card, PC (USB Audio), HDMI (6)
MediaUSB disk and TF card up to 128 GB; APE, FLAC, WAV, MP3, WMA
ControlRS232, IR extension, 5 V trigger, IR remote, mobile app; English OSD

Physical

Power100 - 240 V~, 50 / 60 Hz
Dimensions (W × D × H)431 × 317 × 130 mm
Net weight5.3 kg
Gross weight7.2 kg

Product overview

The Tonewinner AT-200 is a 7.1.4 Dolby Atmos and DTS:X AV processor with built-in digital karaoke: a theatre and karaoke audio-video decoder with 7.1.4 fully balanced and RCA outputs, HDMI 6 in / 2 out with 4K, Dolby Vision and HDR10, ETQ automatic room calibration and one-button switching between cinema and karaoke.

The AT-200 is a surround decoding pre-amplifier that feeds separate power amplifiers or active speakers. It decodes Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, DTS:X, DTS-HD Master Audio and the earlier HD formats, and its Dolby Surround and DTS Neural:X processing gives ordinary stereo and surround material an immersive 3D presentation. Speaker layouts run from 5.1 up to 7.1.4, with up to two subwoofers.

Its second personality is karaoke. A dedicated theatre / karaoke button cycles through theatre mode, the built-in effector, an external effector and pure external vocal. The DSP adds multi-channel digital karaoke reverberation with multi-level tuning, a built-in feedback exterminator, dynamic frequency shifting and anti-howling, and the karaoke volume and music volume at power-on can be preset. The processor saves the settings of each HDMI input and recognises theatre or karaoke mode automatically.

Tonewinner's Easy Test EQ measures the room with the ETM-2 professional microphone (sold separately): it measures the distance from speakers to the seat, sets delay and sound pressure level, and calibrates and compensates each speaker's frequency response. EQ can then be refined with 11 bands for full-range channels and 5 for bass, crossover and slope are set independently for each channel group, and lip-sync reaches 1000 ms.

Video runs through HDMI 6 in / 2 out with 4K (3840 × 2160, 18 Gbps), 3D, Dolby Vision, HDR10, HDR10+ and HLG, HDCP 2.2, ARC, CEC and standby pass-through. Music plays from USB disks and TF cards up to 128 GB in APE, FLAC, WAV, MP3 and WMA, from a PC over USB Audio, or wirelessly from a phone; RS232, IR extension and a 5 V trigger connect it to the rest of the home.

Dolby Atmos / DTS:X channels 7.1.4
Signal to noise ratio ≥ 98 dB
Frequency response (+1 / -3 dB) 10 Hz - 50 kHz
HDMI with 4K and Dolby Vision 6 in / 2 out

Key features

  • 7.1.4 Dolby Atmos and DTS:X decoder, with Dolby Surround and DTS Neural:X upmixing
  • 7.1.4 fully balanced XLR and RCA outputs; up to two subwoofers
  • Digital karaoke: DSP reverberation, feedback exterminator, frequency shifting and anti-howling
  • One-click theatre / karaoke switch: theatre, built-in effector, external effector, pure external vocal
  • Karaoke 5.1 input for an external effect processor
  • Easy Test EQ automatic room calibration (ETM-2 microphone sold separately)
  • 11-band (full range) and 5-band (bass) EQ, independent EQ per input group
  • Independent crossover and slope for each channel group; DRC dynamic range compression
  • HDMI 6 in / 2 out, 4K, 3D, Dolby Vision, HDR10, HDR10+, HLG, HDCP 2.2, ARC, CEC
  • Audio and video matrix grouping with one-click scene switching
  • USB disk and TF card music up to 128 GB, USB Audio from a PC, wireless transmission
  • RS232, IR extension, 5 V trigger, mobile app control, English OSD

Made for

  • Home theatres from 5.1 to 7.1.4 with separate power amplifiers
  • Living rooms and family rooms that combine films and karaoke
  • Bedrooms and media rooms with a TV or projector
  • Commercially customised cinemas and karaoke rooms

In the box

  • AT-200 AV processor
  • Remote control
  • HDMI 4K cable
  • Power cord
  • Manual and certificate

Connections

  • 6 × HDMI input; 2 × HDMI output (OUT 1 with ARC)
  • 13 × balanced XLR analogue output (7.1.4 with two subwoofers)
  • RCA line outputs (7.1.4)
  • Karaoke 5.1 RCA input and 6 × XLR karaoke output
  • 3 × stereo analogue input (AN1 / SAT, AN2, AN3)
  • 2 × coaxial and 2 × optical digital input
  • 2 × microphone input (MIC 1, MIC 2)
  • AUTO SET MIC input for calibration
  • USB (for PC), USB disk and micro TF card
  • Wireless antenna, IR input, trigger output, RS232
  • Mains inlet, 100 - 240 V

Tonewinner AT-200: frequently asked questions

Is the AT-200 an AV receiver?

No. It is an AV processor (pre-amplifier) with no built-in power amplifiers. Its 7.1.4 balanced XLR and RCA outputs feed power amplifiers or active speakers.

How does the karaoke function work?

A theatre / karaoke button switches between theatre mode, the built-in karaoke effector, an external effector and pure external vocal. The DSP provides reverberation, multi-level tuning, a feedback exterminator, frequency shifting and anti-howling, and karaoke and music volumes can be preset for power-on.

Is the calibration microphone included?

No. Easy Test EQ calibration uses the ETM-2 professional microphone, which is not included.

Which speaker layouts and video formats does it support?

Speaker layouts 5.1, 5.1.2, 5.1.4, 7.1, 7.1.2 and 7.1.4 with up to two subwoofers. Video runs at 4K (2160p60) and lower resolutions, with 3D, Dolby Vision, HDR10, HDR10+ and HLG.

How is the firmware updated?

Copy the latest firmware to a USB disk, connect it to the USB port and restart the processor; the update runs automatically.

Where can I buy the Tonewinner AT-200 in India?

The Tonewinner AT-200 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: 7.1.4 Dolby Atmos home theatre

Home theatres built with separate power amplifiers and height speakers.

Connections

ConnectTo
Blu-ray player and set-top box HDMI outputsAT-200 HDMI 1 - 6
AT-200 HDMI OUT 1TV or projector
AT-200 XLR analogue outputsPower amplifier inputs
AT-200 Sw1 / Sw2 outputsActive subwoofers

Setup

  1. Connect the sources to the HDMI inputs and HDMI OUT 1 to the display.
  2. Run balanced XLR cables from the 7.1.4 outputs to the power amplifiers.
  3. Select the 7.1.4 layout in the English OSD speaker setup.
  4. Set crossover and slope for each channel group.
  5. Run Easy Test EQ with the ETM-2 microphone, then fine-tune the EQ.

Tip: Settings are saved automatically for each HDMI input.

Workflow 2: Family room for films and karaoke

Families who want one system for movie nights and singing.

Connections

ConnectTo
MicrophonesAT-200 MIC 1 / MIC 2 inputs
Karaoke player or set-top box HDMI outputAT-200 HDMI input
AT-200 outputsPower amplifiers and speakers

Setup

  1. Connect the microphones to MIC 1 and MIC 2.
  2. Press the theatre / karaoke button to choose the built-in effector.
  3. Set reverberation and tuning levels, and preset the power-on karaoke and music volumes.
  4. Use anti-howling and the feedback exterminator to keep the microphones clean.
  5. Press the button again to return to theatre mode for films.

Tip: The processor recognises theatre or karaoke mode automatically for each HDMI input.

Workflow 3: Karaoke with an external effect processor

Karaoke rooms that already use a dedicated effect unit.

Connections

ConnectTo
External effect processor 5.1 outputAT-200 KARAOKE IN (RCA)
AT-200 KARAOKE OUT (XLR)External effect processor or power amplifiers

Setup

  1. Connect the effect processor to the karaoke input.
  2. Choose external effector or pure external vocal with the theatre / karaoke button.
  3. Balance the vocal and music levels.
  4. Save the settings and lock them from the remote.

Tip: Pure external vocal mode passes the external vocal without the built-in effects.

Workflow 4: Room calibration with Easy Test EQ

Owners who want an evenly balanced sound in their own room.

Connections

ConnectTo
ETM-2 microphone (not included)AT-200 AUTO SET MIC input

Setup

  1. Place the ETM-2 microphone at the main seat and connect it.
  2. Start the EQ test from the menu or the MIC SETUP key on the remote.
  3. Let it measure speaker distances, set delay and level and calibrate each channel's frequency response.
  4. Adjust the 11-band or 5-band EQ by hand if wanted and back up the settings.

Tip: A one-click factory reset on the remote returns to default settings if needed.

Workflow 5: Music from USB, TF card and phone

Listeners who want lossless music without a separate player.

Connections

ConnectTo
USB disk or TF card (up to 128 GB)AT-200 USB or micro TF slot
ComputerAT-200 USB (for PC)
PhoneAT-200 wireless input

Setup

  1. Load APE, FLAC, WAV, MP3 or WMA files on a USB disk or TF card.
  2. Insert it and browse the music in the mobile app or on the OSD.
  3. For a computer, use the USB Audio input.
  4. Stream from a phone through the wireless input.

Tip: Firmware updates also install from a USB disk: copy the file, connect and restart.

Workflow 6: Smart-home and rack integration

Installations with central control and hidden equipment.

Connections

ConnectTo
Smart home controllerAT-200 RS232 port
AT-200 TRIGGER OUTPower amplifier trigger input
IR extenderAT-200 IR IN

Setup

  1. Connect the controller to the RS232 port.
  2. Link the 5 V trigger to the power amplifiers.
  3. Fit an IR extender (not included) if the processor is in a closed cabinet.
  4. Use CEC and HDMI output management for the display.

Tip: Standby pass-through keeps HDMI video going to the TV while the processor is in standby.

Request a Quote

TONEWINNER AT-200

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›