TONEWINNER AT-300 product guide and data sheet cover
‹
TONEWINNER AT-300 product guide and data sheet coverTONEWINNER AT-300 data sheet page 2: Theatre and music centreTONEWINNER AT-300 data sheet page 3: Professional decodingTONEWINNER AT-300 data sheet page 4: Easy Test EQTONEWINNER AT-300 data sheet page 5: Set-up on the screenTONEWINNER AT-300 data sheet page 6: ConnectionsTONEWINNER AT-300 data sheet page 7: Control and videoTONEWINNER AT-300 data sheet page 8: Music and specifications
›

Brand: TONEWINNER

TONEWINNER AT-300

PRICE ON ENQUIRY

Category: AV Receivers & Processors | Series: AT SERIES

Tonewinner AT-300: 16-channel 9.3.4 / 7.3.6 Dolby Atmos / DTS:X AV processor, balanced outputs, HDMI 6-in / 2-out 4K with eARC, Easy Test EQ. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

Type16-channel Dolby Atmos AV processor (pre-amplifier)
Channels9.3.4 / 7.3.6
Outputs9.1.4 fully balanced (XLR); 9.3.4 RCA
Speaker layouts5.1, 5.1.2, 5.1.4, 7.1, 7.1.2, 7.3.4, 7.3.6, 9.3.4 and others

Audio performance

SNR≥ 98 dB (A-weighted, direct mode)
THD≤ 0.02 % (1 kHz, normal working)
Frequency response10 Hz - 50 kHz (+1 / -3 dB, analogue direct)
Channel separation> 80 dB (analogue direct)
Gain≥ 14 dB (analogue direct)
Input level≥ 2 Vrms (analogue direct)
Rated input impedance20 kΩ (analogue input)
Rated output impedance1 kΩ
Volume range0 - 80 by default; actual gain -65 to +15

Decoding and processing

Audio formatsDolby Atmos, Dolby TrueHD, Dolby Digital Plus, DTS:X, DTS-HD Master Audio, DTS Hi Res and earlier HD formats
ProcessingFloating-point DSP with two audio processors; virtual surround and wides
EQ11 bands (full-range channels), 5 bands (bass); per input group
Bass managementIndependent crossover and slope for front, centre, surround, rear and height; bass enhancement
Room calibrationEasy Test EQ with ETM-2 microphone
Lip-syncUp to 1000 ms
OtherDRC; audio and video matrix grouping

Video

HDMI6 in, 2 out; eARC; CEC; HDCP 2.2; standby pass-through
Video formats3840 × 2160 4K / 60 Hz, 18 Gbps, up to 32-bit input, RGB / YUV 4:4:4, 3D; Dolby Vision, HDR10, HDR10+, HLG

Inputs and control

Audio inputs2 × optical, 2 × coaxial, 3 × stereo analogue; USB Audio (PC); wireless
MediaUSB disk and TF card up to 128 GB; APE, FLAC, WAV, MP3, WMA
ControlRS232, IR extension, 5 V trigger, IR remote, mobile app; English OSD

Physical

Power voltage100 - 240 V~, 50 - 60 Hz
Dimensions (W × H × D)431 × 100 × 326 mm
Net weight4.4 kg (spec table)
Gross weight8 kg
ColourBlack

Product overview

The Tonewinner AT-300 is a 16-channel theatre and music-centre AV processor for 9.3.4 and 7.3.6 systems: Dolby Atmos and DTS:X decoding, 9.1.4 fully balanced and 9.3.4 RCA outputs, HDMI 6 in / 2 out with 4K, Dolby Vision and eARC, and Tonewinner's Easy Test EQ room calibration.

The AT-300 is a surround decoding pre-amplifier for homes, private cinemas and theatres. It decodes Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, DTS:X, DTS-HD Master Audio and the other earlier HD formats, and drives separate power amplifiers or active speakers in layouts from 5.1 up to 7.3.6 and 9.3.4, with up to three subwoofers.

Inside, a floating-point DSP handles the Dolby Atmos and DTS:X decoding and the creation of virtual surround and wide channels, while two dedicated audio processors work with it to shape the frequency response, timbre and sound effects, keeping the sound field separated and the surround coherent. Bass management sets crossover and slope independently for front, centre, surround, rear and height channels, with bass enhancement, and EQ offers 11 bands on full-range channels and 5 on bass, independently for each input group.

Easy Test EQ calibrates the room with the ETM-2 professional microphone: it measures the distance from each speaker to the seat, sets delay and level, calibrates each speaker's frequency response and balances the full-range channels against the bass. Lip-sync reaches 1000 ms, and DRC dynamic range compression keeps late-night listening comfortable.

The video section passes 4K at 60 Hz (3840 × 2160, 18 Gbps) with RGB / YUV 4:4:4, 3D, Dolby Vision, HDR10, HDR10+ and HLG, HDCP 2.2 and CEC, and the main output supports eARC. Music plays from USB disks and TF cards up to 128 GB, from a PC over USB Audio or wirelessly, and RS232, IR extension and a 5 V trigger link the AT-300 into smart homes.

Channels: 9.3.4 / 7.3.6 16
Signal to noise ratio ≥ 98 dB
Frequency response (+1 / -3 dB) 10 Hz - 50 kHz
HDMI video with eARC 4K / 60 Hz

Key features

  • 16-channel Dolby Atmos and DTS:X processor, backward compatible with all HD audio formats
  • 9.1.4 fully balanced XLR and 9.3.4 RCA outputs; layouts up to 7.3.6 / 9.3.4
  • Floating-point DSP with two dedicated audio processors; virtual surround and wides
  • Easy Test EQ automatic room calibration with the ETM-2 microphone
  • 11-band (full range) and 5-band (bass) EQ, independent for each input group
  • Independent crossover and slope per channel group; bass enhancement; DRC
  • HDMI 6 in / 2 out, 4K 60 Hz, 3D, Dolby Vision, HDR10, HDR10+, HLG, HDCP 2.2
  • eARC on the main HDMI output; CEC; standby pass-through
  • Audio and video matrix grouping with one-click synchronisation
  • USB disk and TF card music up to 128 GB (APE, FLAC, WAV, MP3, WMA), USB Audio, wireless transmission
  • RS232, IR extension, 5 V trigger, mobile app, English OSD
  • Lip-sync up to 1000 ms; parameter lock and backup

Made for

  • Private cinemas with 7.3.6 or 9.3.4 Dolby Atmos layouts
  • Home theatres with separate multi-channel power amplifiers
  • Houses, cinemas and theatres needing a flexible decoder
  • Combined cinema and music systems

In the box

  • AT-300 AV processor
  • Remote control
  • HDMI 4K cable
  • Power cord
  • Manual and certificate

Connections

  • 6 × HDMI input; 2 × HDMI output (MAIN with eARC, SUB)
  • 14 × balanced XLR output
  • 16 × RCA line output (including 3 subwoofer outputs)
  • Analogue stereo inputs and expansion input
  • 2 × coaxial and 2 × optical digital input
  • AUTO SET MIC input
  • USB disk, USB (for PC) and micro TF card
  • Wireless antenna, IR input, trigger output, RS232
  • Mains inlet, 100 - 240 V

Tonewinner AT-300: frequently asked questions

Is the AT-300 an AV receiver?

No. It is a 16-channel AV processor (pre-amplifier) without power amplifiers. Its balanced XLR and RCA outputs feed power amplifiers or active speakers.

Which speaker layouts does it support?

5.1, 5.1.2, 5.1.4, 7.1, 7.1.2, 7.3.4, 7.3.6 and 9.3.4 among others, with 9.1.4 fully balanced output and 9.3.4 RCA output.

How is the room calibrated?

With Easy Test EQ and the ETM-2 professional microphone. It measures speaker distances, sets delay and level, calibrates each speaker's frequency response and balances full-range channels against the bass.

Does it support eARC and HDR?

Yes. The main HDMI output supports eARC, and video passes at 4K 60 Hz with 3D, Dolby Vision, HDR10, HDR10+ and HLG.

How is the firmware updated?

Copy the latest firmware to a USB disk, connect it to the USB port and restart; the update runs automatically.

Where can I buy the Tonewinner AT-300 in India?

The Tonewinner AT-300 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: 9.1.4 balanced cinema

Private cinemas with wide speakers and four height channels.

Connections

ConnectTo
Blu-ray player and streaming box HDMI outputsAT-300 HDMI 1 - 6
AT-300 HDMI OUT MAINProjector or TV
AT-300 XLR outputsMulti-channel power amplifiers

Setup

  1. Connect the sources to the HDMI inputs and the MAIN output to the display.
  2. Run balanced XLR cables from the 9.1.4 outputs to the power amplifiers.
  3. Choose the speaker layout in the English OSD.
  4. Set crossover and slope for each channel group.
  5. Run Easy Test EQ, then refine the EQ by hand.

Tip: Balanced outputs suit long cable runs to an equipment rack.

Workflow 2: 7.3.6 theatre with three subwoofers

Rooms that want deep, even bass and a full overhead layer.

Connections

ConnectTo
AT-300 Sw1 / Sw2 / Sw3 RCA outputsThree active subwoofers
AT-300 RCA outputsPower amplifiers for the main and six height channels

Setup

  1. Place three subwoofers around the room and connect each to its own output.
  2. Connect the main and height channels to the power amplifiers.
  3. Select 7.3.6 in the speaker setup.
  4. Calibrate with Easy Test EQ and use bass enhancement if wanted.

Tip: Calibration balances the full-range channels against the bass.

Workflow 3: Room calibration with Easy Test EQ

Owners who want an even, balanced sound at the main seat.

Connections

ConnectTo
ETM-2 microphoneAT-300 AUTO SET MIC input

Setup

  1. Place the microphone at the main seat and connect it.
  2. Start the EQ test from the OSD menu.
  3. Let it measure distances, set delay and level and calibrate each speaker's response.
  4. Back up the settings and lock them.

Tip: EQ can be set independently for each input group, for example a different curve for films and music.

Workflow 4: Living-room system with eARC TV

Families who stream from the TV's own apps.

Connections

ConnectTo
TV HDMI eARC portAT-300 HDMI OUT MAIN (eARC)
Set-top box or consoleAT-300 HDMI input

Setup

  1. Connect the TV's eARC port to the MAIN HDMI output.
  2. Connect the other sources to the HDMI inputs.
  3. Turn on eARC and CEC in the TV.
  4. Use audio and video matrix groups to switch scenes with one click.

Tip: Standby pass-through keeps video going to the TV while the processor is in standby.

Workflow 5: Lossless music centre

Listeners who want music through the theatre system.

Connections

ConnectTo
USB disk or TF card (up to 128 GB)AT-300 USB or micro TF slot
ComputerAT-300 USB (for PC)
PhoneAT-300 wireless input

Setup

  1. Load APE, FLAC, WAV, MP3 or WMA files.
  2. Insert the USB disk or TF card and browse in the app or OSD.
  3. Use USB Audio for a computer.
  4. Stream wirelessly from a phone.

Tip: DRC keeps late-night listening at a comfortable level.

Workflow 6: Smart-home integration

Homes with central control and racks out of sight.

Connections

ConnectTo
Smart home controllerAT-300 RS232 port
AT-300 TRIGGER OUTPower amplifier trigger input
IR extender (not included)AT-300 IR IN

Setup

  1. Connect the controller to the RS232 port.
  2. Link the 5 V trigger to the amplifiers.
  3. Add an IR extender if the processor sits in a closed cabinet.
  4. Use the one-touch lock to protect the finished settings.

Tip: A one-button factory reset is available if the settings need to start again.

Request a Quote

TONEWINNER AT-300

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›