









TONEWINNER SUB-12TD
PRICE ON ENQUIRY
Tonewinner SUB-12TD 12-inch active subwoofer: ≥ 300 W into 4 Ω, double bass reflex, XLR and RCA inputs, volume, frequency, phase and EQ controls. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Model | SUB-12TD |
| Type | 12-inch active subwoofer, double bass reflex |
Driver
| Driver | 12" × 1 |
| Construction | Elastic cone, integrated moulded aluminium alloy frame, rubber surround, integrated moulded magnet |
Amplifier
| Amplifier output | ≥ 300 W (4 Ω) |
| Max power | ≤ 450 W |
| Max power consumption | 450 W max |
| Impedance | 8 Ω |
| Circuit | Constant current source, differential amplifying and push-pull circuits, four Darlington transistors |
| Filter capacitor | 20,000 μF |
| Transformer | 400 VA |
Acoustic performance
| Frequency range | 30 Hz - 250 Hz |
| Signal to noise ratio | ≥ 95 dB (A-weighted) |
| Distortion | ≤ 0.08 % |
| Min. input sensitivity | ≤ 350 mV |
Inputs and controls
| Inputs | Line input L / R (RCA), balanced input (XLR) |
| Controls | Volume, frequency, phase (0-180°), EQ |
| Indicator | On / standby indicator |
| Protection | Overvoltage, overcurrent, overload, overheat, short circuit |
Power
| Power supply | ~220 V / 50 Hz or ~110 V / 60 Hz (selectable) |
Physical
| Cabinet | 25 mm medium density fibreboard, rosewood veneer, cloth grille |
| Dimensions (W × D × H) | 370 × 467 × 470 mm |
| Net weight | 30.2 kg |
| Gross weight | 35 kg |
| Accessories | Manual × 1, certificate × 1 |
Product overview
The Tonewinner SUB-12TD is a 12-inch active home theatre subwoofer with a built-in amplifier rated at 300 W or more into 4 Ω, a double bass reflex design firing towards the floor, and adjustable volume, crossover frequency, phase and EQ.
The SUB-12TD is built for large amplitude, low distortion and a wide dynamic range. Its 12-inch bass driver combines an elastic cone with an integrated moulded aluminium alloy frame, a resilient rubber surround, a big voice coil and an integrated moulded magnet, so it can handle high-power, long-term dynamic driving and reach deep into the low frequencies.
Two bass reflex ports at the bottom of the cabinet send the rest of the sound energy towards the floor. This energy works together with the sound coming directly from the driver to fill the room with bass. The cabinet is made of 25 mm medium density fibreboard with a rosewood veneer, a polished surface and rounded corners, and the cloth grille lets the sound pass through easily.
Inside, a constant current source circuit, a differential amplifying circuit and a push-pull circuit with four Darlington transistors deliver the output power, supported by a 20,000 μF capacitor and a 400 VA transformer. Protection circuits cover overvoltage, overcurrent, overload, overheating and short circuits, so the subwoofer can deliver high power for long periods.
For connection there are left and right line inputs (RCA) feeding a built-in bass processor with automatic crossover, plus a balanced XLR input that reduces interference over long cable runs. Volume, crossover frequency, phase (0-180°) and an EQ switch let the bass be tuned to the room and to personal taste, and an input voltage selector covers both 220 V / 50 Hz and 110 V / 60 Hz mains.
| bass driver | 12" |
| amplifier output into 4 Ω | ≥ 300 W |
| frequency range | 30-250 Hz |
| net weight | 30.2 kg |
Key features
- 12-inch bass driver with elastic cone and integrated moulded aluminium alloy frame
- Resilient rubber surround, big voice coil and integrated moulded magnet for high power and deep bass
- Double bass reflex design: two ports at the bottom firing towards the floor
- Amplifier output: 300 W or more into 4 Ω
- Constant current source, differential and push-pull circuits with four Darlington transistors
- 20,000 μF capacitor and 400 VA transformer
- Adjustable volume, crossover frequency, phase (0-180°) and EQ
- Left / right line inputs with built-in bass processor and automatic crossover
- Balanced XLR input for long cable runs with less interference
- Protection against overvoltage, overcurrent, overload, overheating and short circuit
- 25 mm MDF cabinet with rosewood veneer and cloth grille
- Selectable mains voltage: 220 V / 50 Hz or 110 V / 60 Hz
Made for
- Home theatre systems with an AV receiver or processor
- Stereo systems that need deeper bass
- Medium and large living rooms and dedicated cinema rooms
- Systems with long cable runs, using the balanced input
In the box
- SUB-12TD active subwoofer
- User manual
- Certificate
Connections
- Line input: left and right RCA
- Balanced input: XLR
- Controls: volume, frequency, phase, EQ switch
- Input voltage selector, fuse holder, power switch
- AC power inlet
Tonewinner SUB-12TD: frequently asked questions
How powerful is the SUB-12TD?
The built-in amplifier is rated at an output of 300 W or more into 4 Ω. The spec table lists a maximum power of 450 W, which the parameter picture gives as the maximum power consumption.
How low does it go?
The official spec table gives a frequency range of 30 Hz to 250 Hz.
Can I connect it with a balanced cable?
Yes. Besides the left and right RCA line inputs there is a balanced XLR input, which reduces interference over long cable runs.
Why are the ports at the bottom?
The double bass reflex design uses two ports at the bottom of the cabinet that send sound energy towards the floor. Combined with the sound from the driver, this fills the room with bass.
Does it work on Indian mains voltage?
Yes. The input voltage selector on the rear panel covers 220 V / 50 Hz as well as 110 V / 60 Hz.
Where can I buy the Tonewinner SUB-12TD in India?
The Tonewinner SUB-12TD is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Subwoofer for a 5.1 living-room home theatre
Families adding deep bass to a TV and AV receiver system.
Connections
| Connect | To |
|---|---|
| AV receiver subwoofer (LFE) output | SUB-12TD line input (RCA) |
| SUB-12TD | Mains socket, voltage selector on 220 V |
Setup
- Check that the input voltage selector is set to 220 V / 50 Hz before connecting power.
- Connect the receiver's subwoofer output to the line input with an RCA cable.
- Place the subwoofer on a solid floor near the front of the room.
- Switch on with the power switch and set the volume knob to a moderate level.
- Run the receiver's speaker set-up and fine-tune the level.
Tip: The two bass ports fire towards the floor, so keep the feet on a firm surface and the base unobstructed.
Workflow 2: Balanced connection in a dedicated cinema room
Cinema rooms where the rack is far from the subwoofer.
Connections
| Connect | To |
|---|---|
| AV processor balanced subwoofer output | SUB-12TD balanced XLR input |
Setup
- Run an XLR cable from the processor's balanced subwoofer output to the balanced input.
- Place the subwoofer in the front of the room.
- Set the frequency control and phase to suit the main speakers.
- Calibrate levels from the processor.
Tip: The balanced input reduces interference over long cable runs.
Workflow 3: Adding bass to a stereo system
Music listeners with a stereo amplifier and bookshelf speakers.
Connections
| Connect | To |
|---|---|
| Stereo preamplifier L / R outputs | SUB-12TD line inputs L / R |
Setup
- Connect the left and right outputs of the preamplifier to the left and right line inputs.
- Use the frequency knob to set where the subwoofer takes over from the main speakers.
- Turn the phase control from 0 to 180° and keep the setting with the fullest bass at the listening seat.
- Balance the volume with the main speakers.
Tip: The built-in bass processor and automatic crossover handle the stereo signal.
Workflow 4: Tuning bass to the room
Anyone fine-tuning the subwoofer after installation.
Connections
| Connect | To |
|---|---|
| Source playing bass-rich music or films | SUB-12TD |
Setup
- Start with the volume low and the frequency control in the middle.
- Adjust the frequency until the subwoofer blends with the main speakers.
- Try both ends of the phase control and keep the fuller sound.
- Switch the EQ to suit personal taste.
- Raise the volume to the desired level.
Tip: Make small changes and listen from the main seat.
Workflow 5: Long film sessions at high level
Home cinema owners who watch films for hours.
Connections
| Connect | To |
|---|---|
| AV receiver | SUB-12TD |
Setup
- Leave space behind the cabinet around the rear heat sink.
- Set the volume so the receiver is not clipping the input.
- Enjoy long sessions: the amplifier is designed for long-term high-power driving.
- Rely on the protection against overvoltage, overcurrent, overload, overheating and short circuits.
Tip: The on / standby indicator on the rear panel shows the working status.
Workflow 6: Two-room setup with a choice of inputs
Homes moving the subwoofer between a stereo and a home theatre system.
Connections
| Connect | To |
|---|---|
| Home theatre processor | SUB-12TD balanced input |
| Stereo preamplifier | SUB-12TD line inputs |
Setup
- Connect the processor to the balanced XLR input.
- Connect the stereo preamplifier to the RCA line inputs.
- Use the source currently playing; switch the other off.
- Readjust volume and frequency for each system.
Tip: Note the knob settings for each system so switching is quick.








