






TOTEM ACOUSTIC Bison Tower
PRICE ON ENQUIRY
Totem Acoustic Bison Tower: compact ported two-way floorstanding speaker, 5.25-inch woofer, 1.3-inch soft dome tweeter, 33 Hz - 30 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Design | Ported two-way tower speaker |
| Frequency response | 33 Hz - 30 kHz ± 3 dB |
| Sensitivity | 88 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 30 - 150 W |
| Crossover frequency | 2.5 kHz (first order) |
Drivers
| Woofer | 5.25 in (133.35 mm), copper-clad voice coil |
| Tweeter | 1.3 in (33 mm) laser-etched textile soft dome |
Connections
| Speaker terminals | Four-way, bi-wireable |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Placement from rear wall | 8 in - 3 ft (203.2 - 914.4 mm) |
| Placement between speakers | 3 - 10 ft (914.4 - 3048 mm) |
| Break-in time | 70 - 100 hours |
Physical
| Width | 175 mm (6.89 in) |
| Height | 850 mm (33.465 in); 864 mm (34.016 in) with claws installed |
| Depth | 232 mm (9.134 in); 242 mm (9.528 in) with grille installed |
| Weight | 14.47 kg (31.90 lb) |
| Feet | Decoupling claws, high-density inert composite, 1/4-inch 20 thread insert |
| Mass loading | Optional, lower cavity |
| Grille | Magnetic, included |
| Made in | Canada |
Versions
| BISON-TOWER-BLACK-ASH | Black Ash |
| BISON-TOWER-BLACK-WALNUT | Black Walnut |
| BISON-TOWER-WHITE-OAK | White Oak |
| BISON-TOWER-SATIN-WHITE | Satin White |
Product overview
The Totem Acoustic Bison Tower is a modestly sized, made-in-Canada floorstanding speaker: a ported two-way design with a custom 5.25-inch woofer, a 1.3-inch laser-etched textile soft dome tweeter, a hand-made crossover and decoupling claw feet.
It is an easy-listening, musically captivating full-range speaker that fills the room with spatial cues, extended harmonics and a full-scale portrayal of instruments and vocals. Its non-directional sound surprises with its dynamics, and the music comes across fresh, sparkling and revitalising.
The Bison Tower is impeccably proportioned, not finicky about placement and easy to match with any decor, yet its sonic abilities contradict its modest size. It shares the merits of the other speakers in the Bison family and is meant to reward its owner whether it is used in a simple stereo system, with a tube amplifier or as part of a complete Totem surround system.
Inside, Totem's custom-engineered drivers, a 5.25-inch woofer with a copper-clad voice coil and a 1.3-inch (33 mm) soft dome tweeter, are joined by a hand-made first-order crossover at 2.5 kHz. The cabinet is built with artisanal construction and stands on Totem's composite claw feet, a lower cavity can be mass-loaded with dry sand for extra stability, the four-way terminals are bi-wireable, and magnetic grilles are included. Finishes: Black Ash, Black Walnut, White Oak and Satin White.
| Frequency response (± 3 dB) | 33 Hz - 30 kHz |
| Sensitivity | 88 dB |
| Recommended amplifier power | 30 - 150 W |
| Impedance | 8 Ω |
Key features
- Compact full-range floorstanding speaker of the Bison series, made in Canada
- Custom-engineered 5.25-inch woofer with copper-clad voice coil
- Custom 1.3-inch (33 mm) laser-etched textile soft dome tweeter
- Hand-made first-order crossover at 2.5 kHz
- Ported two-way design
- Artisanal cabinet construction
- Decoupling claw feet of high-density inert composite, voiced to need no spikes or ball bearings
- Optional mass loading of the lower cavity
- Bi-wireable four-way speaker terminals
- Magnetic grilles included
- Finishes: Black Ash, Black Walnut, White Oak and Satin White
Made for
- Stereo music systems in living rooms, bedrooms and studies
- Simple stereo systems with an integrated amplifier, including tube amplifiers
- Front left and right channels of a Totem surround system
- Music, films, TV and video games
Placement and set-up
- 8 in - 3 ft (203.2 - 914.4 mm) from the rear wall
- 3 - 10 ft (914.4 - 3048 mm) between the speakers
- No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other
- Listening position about 1.5 times the distance between the speakers
- Break-in: 70 - 100 hours of music, without very loud levels during that time
In the box
- Bison Tower loudspeaker
- Magnetic grille
- Decoupling claw feet with screws
- Jumpers fitted between the terminals
Connections
- Bi-wireable four-way speaker terminals (two sets), for single-wire, bi-wire or bi-amp connection
- The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
- Jumpers installed at the factory for single-wire connection
Finishes
- Black Ash, with black magnetic grille
- Black Walnut
- White Oak, with black magnetic grille
- Satin White, with white magnetic grille
Totem Acoustic Bison Tower: frequently asked questions
Is the Bison Tower hard to place?
No. Totem describes it as not finicky about placement. The spec sheet gives 8 in - 3 ft (203.2 - 914.4 mm) from the rear wall and 3 - 10 ft (914.4 - 3048 mm) between the speakers, and no toe-in is needed.
What amplifier does the Bison Tower need?
Totem recommends 30 - 150 W into 8 Ω. It suits a simple integrated amplifier, a tube amplifier or an AV receiver; turn the volume down as soon as distortion starts.
What is mass loading?
An optional way to add weight and stability: with the speaker laid face down, fill only the lower opening with clean dry sand, silica sand or similar dry matter and seal it with the transparent adhesive cover. Never fill the upper, black plastic-lined cavity, which is for bass reflex and air control. Empty the cavity before transporting the speaker, and add the mass in small amounts, as overloading can reduce the image.
Can the Bison Tower be bi-wired?
Yes. It has four-way bi-wireable terminals with jumpers installed for single-wire use; remove them to bi-wire or bi-amp, with the equipment switched off.
How long does the Bison Tower take to break in?
Totem specifies 70 - 100 hours of music playing. Avoid very loud levels during that time.
Where can I buy the Totem Acoustic Bison Tower in India?
The Totem Acoustic Bison Tower is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo living room
Music lovers who want full-range stereo from a compact tower that is easy to place.
Connections
| Connect | To |
|---|---|
| Streamer, CD player or turntable with phono stage | Integrated amplifier input |
| Integrated amplifier L / R speaker outputs (30 - 150 W) | Bison Tower terminals, jumpers in place |
Setup
- Fit the claw feet first, with the speaker resting on its top on the packaging foam end cap.
- Stand the towers 8 in - 3 ft (203.2 - 914.4 mm) from the rear wall and 3 - 10 ft (914.4 - 3048 mm) apart.
- Sit about 1.5 times the speaker spacing away.
- With everything switched off, connect red (+) to red (+) and black (-) to black (-), leaving the jumpers in place.
- Point the speakers straight ahead; no toe-in is needed.
- Play music for 70 - 100 hours at moderate levels to break the speakers in.
Tip: Closer to the wall gives more bass but less soundstage depth: move the towers in small steps.
Workflow 2: Tube amplifier system
Listeners who pair a low-power tube integrated amplifier with an easy-to-drive tower.
Connections
| Connect | To |
|---|---|
| Source | Tube integrated amplifier input |
| Amplifier 8 Ω speaker taps | Bison Tower terminals |
Setup
- Use the amplifier's 8 Ω outputs to match the Bison Tower's 8 Ω impedance.
- Place the towers as for any stereo system, without toe-in.
- Raise the volume gradually and stay below the point where the amplifier starts to distort.
- Allow 70 - 100 hours of break-in.
Tip: More clean power is safer than an amplifier pushed into distortion, the most common cause of speaker damage.
Workflow 3: Mass loading for extra stability
Owners who want a more planted tower on wooden floors or in busy family rooms.
Connections
| Connect | To |
|---|---|
| Clean dry sand, silica sand or other dry particulate matter | Lower cavity of the Bison Tower |
Setup
- Lay the speaker face down against a low piece of furniture, taking care not to crush the tweeter or scratch the finish.
- Fill only the lower opening, never the upper black plastic-lined cavity used for bass reflex and air control.
- Use a funnel and add the mass in small amounts, listening between steps.
- Peel off a transparent mass loading cover and seal the opening; repeat for the other speaker.
Tip: Never transport the speakers with mass inside: empty the cavity first and seal it with sturdy tape.
Workflow 4: Living-room home theatre
Families who want one system for films, TV, video games and music.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver front L / R outputs | Bison Tower terminals |
| AV receiver centre output | Bison Center |
| AV receiver subwoofer pre-out | Subwoofer |
Setup
- Place the towers either side of the screen as for stereo.
- Centre the Bison Center on the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor, equidistant from the towers.
- Place the surround speakers behind and beside the seating at about 6 ft (183 cm) high; in 7.1 add back surrounds behind the listening position.
- Put the subwoofer where it fits best; closer to a corner gives more bass.
- Set distances and levels in the AV receiver.
Tip: The Bison Center shares the DNA of the other Bison speakers, for a seamless front stage.
Workflow 5: Bi-wired stereo with Totem Tress cable
Listeners who want separate cable runs to the woofer and tweeter sections.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | Totem bi-wire Tress speaker cable |
| Bi-wire ends of the cable | Both sets of Bison Tower terminals, jumpers removed |
Setup
- Switch the amplifier off before making any connection.
- Remove the jumpers between the two sets of terminals.
- Connect one pair of conductors to each set of terminals, keeping the polarity the same everywhere.
- Switch on at low volume and check that bass and treble play from each speaker.
Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.
Workflow 6: Bedroom or study system
Smaller rooms where a slim 175 mm wide tower replaces stand-mounted speakers.
Connections
| Connect | To |
|---|---|
| Streamer or TV | Compact integrated amplifier |
| Amplifier L / R speaker outputs | Bison Tower terminals |
Setup
- Place the towers at least 8 in (203.2 mm) from the rear wall and at least 3 ft (914.4 mm) apart.
- Keep them clear of furniture in front of the drivers.
- Fit the magnetic grilles for a tidy look, or remove them for critical listening.
- Keep the volume below the point where the amplifier starts to distort.
Tip: A room with a variety of materials gives a more harmonised sound.








