TOTEM ACOUSTIC Bison Twin Tower product guide and data sheet cover
‹
TOTEM ACOUSTIC Bison Twin Tower product guide and data sheet coverTOTEM ACOUSTIC Bison Twin Tower data sheet page 2: Powerful yet gracefulTOTEM ACOUSTIC Bison Twin Tower data sheet page 3: Drivers and crossoverTOTEM ACOUSTIC Bison Twin Tower data sheet page 4: Artisanal cabinet constructionTOTEM ACOUSTIC Bison Twin Tower data sheet page 5: Placement and set-upTOTEM ACOUSTIC Bison Twin Tower data sheet page 6: Claw feet and connectionsTOTEM ACOUSTIC Bison Twin Tower data sheet page 7: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Bison Twin Tower

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: BISON

Totem Acoustic Bison Twin Tower: ported two-way floorstanding speaker with two 5.25-inch woofers, 1.3-inch soft dome tweeter, 31 Hz - 29.9 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

DesignPorted two-way tower speaker
Frequency response31 Hz - 29.9 kHz ± 3 dB
Sensitivity90 dB
Impedance4 Ω
Recommended amplifier power30 - 200 W
Crossover frequency2.5 kHz (second order)

Drivers

Woofers2 × 5.25 in (133.35 mm), copper-clad voice coil
Tweeter1.3 in (33 mm) laser-etched textile soft dome

Connections

Speaker terminalsFour-way, bi-wireable
Accepted connectionsBare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in)

Placement

Placement from rear wall1 - 3 ft (304.8 - 914.4 mm)
Placement between speakers4 - 12 ft (1219.2 - 3657.6 mm)
Break-in time70 - 100 hours

Physical

Width187 mm (7.362 in)
Height975 mm (38.386 in); 989 mm (38.937 in) with claws installed
Depth260 mm (10.236 in); 270 mm (10.630 in) with grille installed
Weight19.46 kg (42.90 lb)
FeetDecoupling claws, high-density inert composite, 1/4-inch 20 thread insert
GrilleMagnetic, included
Made inCanada

Versions

BISON-TWIN-TOWER-BLACK-ASHBlack Ash
BISON-TWIN-TOWER-BLACK-WALNUTBlack Walnut
BISON-TWIN-TOWER-WHITE-OAKWhite Oak
BISON-TWIN-TOWER-SATIN-WHITESatin White

Product overview

The Totem Acoustic Bison Twin Tower is the made-in-Canada flagship of the Bison series: a ported two-way floorstanding speaker with two custom 5.25-inch woofers working in the same frequency range, a 1.3-inch laser-etched textile soft dome tweeter and decoupling claw feet.

The two high-performance woofers operate in the same frequency domain, which gives a lush, thick midrange and the important bass fullness that is unique in the floorstanding speaker category. Totem uses the same principle in its own flagship Element Metal V2. Each 5.25-inch woofer has a copper-clad voice coil, and the 1.3-inch (33 mm) tweeter has a laser-etched textile soft dome.

Carefully selected components, Totem's own computational tables, custom driver development and evolved, hand-made, hard-wired crossovers give a symbiotic, synergistic and remarkably musical relationship between all the parts. The second-order crossover hands over from the woofers to the tweeter at 2.5 kHz.

The Bison Twin Tower is designed to let listeners experience the full scale, height and vista of music. It works well with a broad array of electronics, and with a well-designed amplifier of 30 - 200 W it gives a top-class, large-scale sound. The cabinet is built by Totem with artisanal construction, it stands on exclusive decoupling claw feet machined from a high-density inert composite, it has bi-wireable four-way terminals, and it comes with magnetic grilles in four finishes: Black Ash, Black Walnut, White Oak and Satin White.

Frequency response (± 3 dB) 31 Hz - 29.9 kHz
Sensitivity 90 dB
Recommended amplifier power 30 - 200 W
Impedance 4 Ω

Key features

  • Flagship of the Bison series, designed and made in Canada
  • Two custom-engineered 5.25-inch woofers working in the same frequency range, with copper-clad voice coils
  • Custom 1.3-inch (33 mm) laser-etched textile soft dome tweeter
  • Hand-made, hard-wired second-order crossover at 2.5 kHz
  • Ported two-way tower design
  • Artisanal cabinet construction
  • Exclusive decoupling claw feet of high-density inert composite, voiced to need no spikes or ball bearings
  • Bi-wireable four-way speaker terminals
  • Magnetic grilles included
  • Finishes: Black Ash, Black Walnut, White Oak and Satin White

Made for

  • Stereo music listening in living rooms and dedicated listening rooms
  • Front left and right channels of a home theatre
  • Music, films, TV and video games
  • A broad array of amplifiers and AV receivers of 30 - 200 W

Placement and set-up

  • 1 - 3 ft (304.8 - 914.4 mm) from the rear wall
  • 4 - 12 ft (1219.2 - 3657.6 mm) between the speakers
  • No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other
  • Listening position about 1.5 times the distance between the speakers
  • Break-in: 70 - 100 hours of music, without very loud levels during that time

In the box

  • Bison Twin Tower loudspeaker
  • Magnetic grille
  • Decoupling claw feet with screws
  • Jumpers fitted between the terminals

Connections

  • Bi-wireable four-way speaker terminals (two sets), for single-wire, bi-wire or bi-amp connection
  • The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
  • Jumpers installed at the factory for single-wire connection

Finishes

  • Black Ash, with black magnetic grille
  • Black Walnut
  • White Oak, with black magnetic grille
  • Satin White, with white magnetic grille

Totem Acoustic Bison Twin Tower: frequently asked questions

Why does the Bison Twin Tower use two woofers in the same range?

Both 5.25-inch woofers work in the same frequency domain, giving a lush, thick midrange and the bass fullness that is unique in the floorstanding category. Totem uses the same principle in its flagship Element Metal V2.

What amplifier does the Bison Twin Tower need?

Totem recommends 30 - 200 W into the 4 Ω load, and the speaker is comfortable with a broad array of electronics. More clean power is safer than an amplifier pushed into distortion: turn the volume down as soon as distortion starts.

How should the Bison Twin Tower be placed?

Totem specifies 1 - 3 ft (304.8 - 914.4 mm) from the rear wall and 4 - 12 ft (1219.2 - 3657.6 mm) between the speakers. No toe-in is needed; sit about 1.5 times the speaker spacing away and fine-tune in small steps.

Do the claw feet need spikes?

No. The Bison claws are designed and voiced for ideal performance without spikes or ball bearings. They have a 1/4-inch 20 thread insert in case spikes are wanted later.

How long does the Bison Twin Tower take to break in?

Totem specifies 70 - 100 hours of music playing. Avoid very loud levels during that time.

Where can I buy the Totem Acoustic Bison Twin Tower in India?

The Totem Acoustic Bison Twin Tower is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo living room

Music lovers who want full-scale stereo sound from a slim tower in the living room.

Connections

ConnectTo
Streamer, CD player or turntable with phono stageIntegrated amplifier input
Integrated amplifier L / R speaker outputs (30 - 200 W, 4 Ω capable)Bison Twin Tower terminals, jumpers in place

Setup

  1. Fit the claw feet first, with the speaker resting on its top on the packaging foam end cap.
  2. Stand the towers 1 - 3 ft (304.8 - 914.4 mm) from the rear wall and 4 - 12 ft (1219.2 - 3657.6 mm) apart.
  3. Sit about 1.5 times the speaker spacing away.
  4. With everything switched off, connect red (+) to red (+) and black (-) to black (-), leaving the jumpers in place.
  5. Point the speakers straight ahead; no toe-in is needed.
  6. Play music for 70 - 100 hours at moderate levels to break the speakers in.

Tip: Closer to the wall gives more bass but less soundstage depth: move the towers in small steps.

Workflow 2: Fitting the claw feet

Owners setting up the Bison Twin Tower on tile, marble, wood or carpet.

Connections

ConnectTo
Totem claws with screwsPre-drilled holes in the base of the cabinet

Setup

  1. Find the final position of the speaker before installation.
  2. Lay the speaker on its top, protected by the packaging foam end cap.
  3. Insert a screw into a claw and use it as a guide to find the pre-drilled hole: one claw centred at the front and one at each rear side.
  4. Tighten with a Robertson or Phillips screwdriver while pushing the claw flush against the cabinet.
  5. Stand the speaker on its claws in its listening position.

Tip: The Bison claws need no spikes or ball bearings; a 1/4-inch 20 thread insert is there if spikes are wanted.

Workflow 3: Bi-wired stereo with Totem Tress cable

Listeners who want separate cable runs to the woofer and tweeter sections.

Connections

ConnectTo
Amplifier L / R speaker outputsTotem bi-wire Tress speaker cable
Bi-wire ends of the cableBoth sets of Bison Twin Tower terminals, jumpers removed

Setup

  1. Switch the amplifier off before making any connection.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one pair of conductors to each set of terminals.
  4. Keep the polarity the same everywhere: positive to positive, negative to negative.
  5. Switch on at low volume and check that bass and treble play from each speaker.

Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.

Workflow 4: Living-room home theatre

Families who want one system for films, TV, video games and music.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front L / R outputsBison Twin Tower terminals
AV receiver centre outputTotem centre channel
AV receiver subwoofer pre-outSubwoofer

Setup

  1. Place the towers either side of the screen as for stereo.
  2. Centre the centre channel on the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor, equidistant from the towers.
  3. Place the surround speakers behind and beside the seating at about 6 ft (183 cm) high; in 7.1 add back surrounds behind the listening position.
  4. Put the subwoofer where it fits best; closer to a corner gives more bass.
  5. Set distances, levels and the 4 Ω front load in the AV receiver.

Tip: Totem's website lists the matching centre channel for each main speaker.

Workflow 5: Bi-amped stereo system

Enthusiasts who drive the woofer and tweeter sections from separate amplifier channels.

Connections

ConnectTo
Preamplifier L / R outputsTwo identical stereo power amplifiers
One amplifier channel per set of terminalsBison Twin Tower terminals, jumpers removed

Setup

  1. Switch all equipment off and read the amplifier manual's bi-amp instructions.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one amplifier channel to each set of terminals, keeping the same polarity throughout.
  4. Switch on, start at low volume and check that both sections of each speaker play.

Tip: Stay within the recommended 30 - 200 W and turn the volume down at the first sign of distortion.

Workflow 6: Apartment music and TV room

Smaller rooms where a slim 187 mm wide tower has to fit beside a TV unit.

Connections

ConnectTo
TV optical or HDMI outputStereo amplifier with digital input, or AV receiver
Amplifier L / R speaker outputsBison Twin Tower terminals

Setup

  1. Place the towers either side of the TV unit, at least 1 ft (304.8 mm) from the rear wall.
  2. Keep at least 4 ft (1219.2 mm) between them.
  3. Fit the magnetic grilles in busy family rooms; remove them for critical listening.
  4. Keep the volume below the point where the amplifier starts to distort.

Tip: A room with a variety of materials gives a more harmonised sound.

Request a Quote

TOTEM ACOUSTIC Bison Twin Tower

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›