TOTEM ACOUSTIC Element Metal V2 product guide and data sheet cover
‹
TOTEM ACOUSTIC Element Metal V2 product guide and data sheet coverTOTEM ACOUSTIC Element Metal V2 data sheet page 2: Two Torrent woofers, no crossoverTOTEM ACOUSTIC Element Metal V2 data sheet page 3: Titanium dome tweeterTOTEM ACOUSTIC Element Metal V2 data sheet page 4: A cabinet without parallel surfacesTOTEM ACOUSTIC Element Metal V2 data sheet page 5: Claw and skid plate decouplingTOTEM ACOUSTIC Element Metal V2 data sheet page 6: Bi-wire terminals and amplificationTOTEM ACOUSTIC Element Metal V2 data sheet page 7: Placement and set-upTOTEM ACOUSTIC Element Metal V2 data sheet page 8: Grilles and finishesTOTEM ACOUSTIC Element Metal V2 data sheet page 9: In a home theatreTOTEM ACOUSTIC Element Metal V2 data sheet page 10: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Element Metal V2

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: ELEMENT V2

Totem Acoustic Element Metal V2 floorstanding speaker: two crossover-free 7-inch Torrent woofers, 1-inch titanium tweeter, 26 Hz - 22 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

TypeFloorstanding loudspeaker
Frequency response26 Hz - 22 kHz
Sensitivity91 dB
Impedance4 Ω
Recommended amplifier power50 - 300 W
CrossoverFirst order, on the tweeter only; no crossover in the low-frequency path

Drivers

Woofers2 × 7-inch Torrent, hand-assembled, seventeen 2.5-inch neodymium magnets each
Tweeter1-inch titanium dome with 3/8-inch aluminium faceplate and finned aluminium alloy chamber

Connections

Speaker terminalsBi-wireable premium connectors on an annealed aluminium plate (bi-wire / bi-amp)
Accepted connectionsBare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in)

Placement

Placement from rear wallAs little as 6 in (15.2 cm); varies with electronics and room acoustics
Placement distance apartAs little as 2 ft (61 cm); varies with electronics and room acoustics
Break-in time200 - 300 hours

Physical

Dimensions (W × H × D)298 × 1104.9 × 378.5 mm (11.7 × 43.5 × 14.9 in)
Weight33.34 kg (73.34 lb)
CabinetGeometric design with no parallel surfaces, borosilicate damping
DecouplingAdjustable front claw and skid plate, rubber and metal bearings
FinishMulti-coat polyester
GrilleMatching magnetic grille, included
Made inMontreal, Quebec, Canada (engineered and hand-built)

Versions

ELEMENT-METAL-V2-DUSKDusk
ELEMENT-METAL-V2-ICEIce

Product overview

The Totem Acoustic Element Metal V2 is the floorstanding flagship of the Element V2 series: a geometric tower with two second-generation 7-inch Torrent woofers that need no crossover, a 1-inch titanium dome tweeter and an adjustable claw and skid plate decoupling system.

The Torrent is Totem's own woofer, precision-machined in-house and hand-assembled. Its driver cradle carries seventeen 2.5-inch neodymium magnets, magnetised with a proprietary topology and positioned cylindrically around the motor structure, so the voice coil stays immersed in the magnetic field for instant control of every movement. The design needs no active or passive crossover in the low-frequency path: the amplifier connects directly to the woofers and controls their excursion, and the signal flows without interruption. The Torrent keeps a significant output up to 5 kHz and gives a midrange of striking articulation, organic harmonics, speed, clarity and detail.

The V2 woofers are all black anodised, with a slightly larger dust cap, rerouted tinsel leads and further damping, for improved midrange control and substantially better bass extension. The Metal V2 also has a different crossover in the tweeter section and a different internal bass tuning, and according to Totem its soundstage is deeper than its predecessor's by a ratio of almost 2:1, with imaging that extends well beyond the physical location of each speaker.

The 1-inch titanium dome tweeter is engineered to match the Torrent. Its 3/8-inch thick aluminium faceplate and finned aluminium body are made from a single solid piece of metal that works as a large radiator, keeping the tweeter stable and cool and matching the pace of the Torrent with clarity and openness at any volume. A first-order crossover on the tweeter is the only crossover in the speaker, and the imaging does not shift at the listening position, even through big dynamic swings.

The cabinet has no parallel surfaces, which suppresses interior standing waves, and borosilicate paint inside keeps cabinet stability and sonic performance for the lifetime of the speaker. At the base, an articulating claw at the front and an aluminium skid plate at the bottom and back decouple the tower from the floor, on hard floors and carpets alike. Bi-wireable premium terminals sit on a custom-machined, annealed aluminium plate, the matching grilles attach with hidden magnets, and every Element V2 loudspeaker is engineered and hand-built in Montreal, Quebec, Canada.

Frequency response 26 Hz - 22 kHz
Sensitivity 91 dB
Recommended amplifier power 50 - 300 W
Impedance 4 Ω

Key features

  • Two 7-inch Torrent woofers: Totem's own hand-assembled drivers with seventeen 2.5-inch neodymium magnets each
  • No crossover in the low-frequency path: no active or passive parts between the amplifier and the woofers
  • Second-generation Torrent: black anodised, slightly larger dust cap, rerouted tinsel leads and further damping
  • 1-inch titanium dome tweeter with 3/8-inch aluminium faceplate and finned aluminium alloy chamber
  • First-order crossover on the tweeter only
  • Geometric cabinet with no parallel surfaces and borosilicate damping inside
  • Adjustable claw and skid plate decoupling system, black anodised, with rubber and metal bearings
  • Bi-wireable premium speaker terminals on a custom-machined, annealed aluminium plate, for bi-wire or bi-amp use
  • Matching magnetic grilles with hidden magnets, included
  • Gleaming multi-coat polyester finishes: Dusk and Ice
  • Engineered and hand-built in Montreal, Quebec, Canada

Made for

  • Stereo music listening in a living room or a dedicated listening room
  • Front left and right channels of a home theatre, with the Element Wood V2 centre channel
  • Music, films, TV and video games
  • Hard floors and carpets, with or without the bearings under the claw and skid plate

Placement and set-up

  • 12 in (30.5 cm) from the back and side walls is the general recommendation; as little as 6 in from the rear wall is possible
  • 4 - 10 ft (120 - 300 cm) apart for a proper stereo image (as little as 2 ft), with the listening position about 1.5 times the spacing away
  • No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, experiment by angling one slightly, then the other
  • Fit the claw and skid plate into the pre-drilled holes in the base; the claw sets the rake of the cabinet for bass loading and phase / space articulation
  • Break-in: 200 - 300 hours of music, without very loud levels during that time

In the box

  • Element Metal V2 loudspeaker
  • Matching magnetic grille
  • Articulating claw and skid plate decoupling system with screws
  • Black rubber and metal bearings
  • Key for fitting the decoupling hardware

Connections

  • Bi-wireable premium speaker terminals (two sets) on an annealed aluminium plate, for single-wire, bi-wire or bi-amp connection
  • The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
  • Jumpers between the two sets of terminals for single-wire connection

Finishes

  • Dusk: multi-coat polyester, with matching magnetic grille
  • Ice: multi-coat polyester, with matching magnetic grille

Totem Acoustic Element Metal V2: frequently asked questions

What makes the Torrent woofers different?

They need no crossover. No active or passive parts sit in the woofer path, so the amplifier drives the two 7-inch Torrents directly and controls their excursion, without the distortion and inefficiency a crossover adds. Seventeen 2.5-inch neodymium magnets encircle each voice coil, and the woofers keep a significant output up to 5 kHz.

What amplifier power does the Element Metal V2 need?

Totem recommends 50 - 300 W into the Metal V2's 4 Ω load. More clean amplifier power is safer than an amplifier pushed into distortion, the most common cause of speaker damage: turn the volume down as soon as distortion starts, and use the speaker within its power range.

What is the claw and skid plate for?

It is the Metal V2's decoupling system. The articulating claw at the front adjusts the rake of the cabinet for optimal bass loading and phase / space articulation, and the aluminium skid plate with two formed feet removes resonances between the floor and the cabinet. Both fit into pre-drilled holes with the included key and can be used with the rubber or metal bearings, or without them, to suit the floor.

Can the Element Metal V2 be bi-wired or bi-amped?

Yes. The premium bi-wire / bi-amp terminals sit on an annealed aluminium plate. For a single cable, keep the jumpers in place between the two sets of terminals; make every connection with the equipment switched off.

How long does the Element Metal V2 take to break in?

Allow 200 - 300 hours of actual music playing, and avoid very loud levels during that time. The music becomes gradually more cohesive as the speakers break in.

Where can I buy the Totem Acoustic Element Metal V2 in India?

The Totem Acoustic Element Metal V2 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers setting up a dedicated listening room or the main stereo system in a large living room.

Connections

ConnectTo
Streamer, CD player or turntable with phono stageIntegrated amplifier input
Integrated amplifier L / R speaker outputs (50 - 300 W recommended, 4 Ω capable)Element Metal V2 terminals, jumpers in place

Setup

  1. Fit the claw and skid plate to each tower first, with the speaker resting on its top on the packaging foam end cap.
  2. Stand the towers about 12 in (30.5 cm) from the back and side walls and 4 - 10 ft (120 - 300 cm) apart.
  3. Sit about 1.5 times the speaker spacing away, for example 9 ft (270 cm) from speakers 6 ft (180 cm) apart.
  4. With everything switched off, connect the speaker cables to the terminals, keeping the jumpers in place.
  5. Point the speakers straight ahead: no toe-in is needed; if they are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other.
  6. Play music for 200 - 300 hours at moderate levels to break the speakers in.

Tip: Closer to the wall gives more bass but less soundstage depth: move the towers in small steps.

Workflow 2: Fitting the claw and skid plate

Owners setting up the Metal V2 on marble, tile, wooden floors or carpet.

Connections

ConnectTo
Articulating claw with threaded insertPre-drilled hole at the front of the base
Aluminium skid platePre-drilled holes at the bottom and back

Setup

  1. Lay the speaker on its top, protected by the packaging foam end cap.
  2. Insert a screw into the claw, use it as a guide to find the pre-drilled hole and tighten it with the included key while pushing the claw flush against the front surface.
  3. Fit the skid plate the same way.
  4. Insert the self-centring ball bearings under the claw and the skid-plate feet, rubber or metal, or leave them out, depending on the floor surface.
  5. Stand the speaker up and adjust the threaded insert of the claw to set the rake of the cabinet.

Tip: Adjust the rake in small steps while listening: it changes bass loading and phase / space articulation.

Workflow 3: Bi-wired stereo with Totem Tress cable

Listeners who want separate cable runs to the woofer and tweeter sections of each tower.

Connections

ConnectTo
Amplifier L / R speaker outputsSingle-stranded end of the Totem bi-wire Tress speaker cable
Double-stranded end of the Tress cableBoth sets of Element Metal V2 terminals, jumpers removed

Setup

  1. Switch the amplifier off before making any connection.
  2. Remove the jumpers between the two sets of terminals on each Metal V2.
  3. Connect the single-stranded end of the bi-wire Tress cable to the amplifier output and the double-stranded end to both sets of terminals.
  4. Keep the polarity the same on every terminal: positive to positive, negative to negative.
  5. Switch on at low volume and check that both bass and treble play from each speaker.

Tip: If the bass or the highs are missing, check that every wire is firmly connected, or refit the jumpers for single-wire use.

Workflow 4: Bi-amped stereo system

Enthusiasts who drive the woofer and tweeter sections of each tower from separate amplifier channels.

Connections

ConnectTo
Preamplifier L / R outputsInputs of two identical stereo power amplifiers
One amplifier channel per set of terminalsElement Metal V2 bi-wire / bi-amp terminals, jumpers removed

Setup

  1. Switch all equipment off.
  2. Remove the jumpers between the two sets of terminals on each speaker.
  3. Connect one amplifier channel to each set of terminals, keeping the same polarity throughout.
  4. Feed both power amplifiers from the preamplifier outputs.
  5. Switch on, start at low volume and check that both sections of each speaker play.

Tip: Stay within the recommended 50 - 300 W and turn the volume down at the first sign of distortion.

Workflow 5: Living-room home theatre

Families who want one system for films, TV, video games and music in the living room.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front L / R speaker outputsElement Metal V2 terminals
AV receiver centre speaker outputElement Wood V2 centre channel
AV receiver subwoofer pre-outSubwoofer

Setup

  1. Use the Metal V2 as front left and right speakers and place them as for stereo, either side of the screen.
  2. Centre the Element Wood V2, voiced to match the Metal V2, on the screen 20 - 30 in (50.8 - 76.2 cm) above the floor, ideally equidistant from the left and right speakers.
  3. Place the surround speakers behind and beside the seating at about 6 ft (183 cm) high; in a 7.1 system add the back surrounds behind the listening position.
  4. Put the subwoofer where it fits best; closer to a corner gives more bass.
  5. Set speaker distances, levels and the 4 Ω front load in the AV receiver, then fine-tune positions in small steps.

Tip: Slight changes of position can bring substantially better performance: experiment.

Workflow 6: Dedicated cinema and music room

Home owners building a room where the same front towers serve films and serious music listening.

Connections

ConnectTo
Media player and streamerAV processor or AV receiver HDMI inputs
AV processor front L / R pre-outsStereo power amplifier (50 - 300 W, 4 Ω capable)
Power amplifier speaker outputsElement Metal V2 terminals

Setup

  1. Plan a room with a variety of materials for a more harmonised sound.
  2. Place the Metal V2 towers at least 6 in (15.2 cm) from the front wall and 12 in (30.5 cm) from the side walls as a start.
  3. Drive the towers from a dedicated power amplifier fed by the AV processor's front pre-outs.
  4. Add the Element Wood V2 centre and surrounds as in a living-room system.
  5. Make all connections with the equipment switched off, then raise the level gradually and listen for distortion.

Tip: With most music, an amplifier reaches its maximum power between the 11 and 1 o'clock positions of the volume control.

Request a Quote

TOTEM ACOUSTIC Element Metal V2

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›