TOTEM ACOUSTIC Forest Signature product guide and data sheet cover
‹
TOTEM ACOUSTIC Forest Signature product guide and data sheet coverTOTEM ACOUSTIC Forest Signature data sheet page 2: Designed to transcend timeTOTEM ACOUSTIC Forest Signature data sheet page 3: Cabinet, claw and rakeTOTEM ACOUSTIC Forest Signature data sheet page 4: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Forest Signature

PRICE ON ENQUIRY

Category: Floorstanding Speakers | Series: SIGNATURE

Totem Acoustic Forest Signature: two-way columnar tower, 6.5-inch woofer with 3-inch voice coil, aluminium / titanium dome tweeter, adjustable rake. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

TypeTwo-way columnar floorstanding speaker
Frequency response28 Hz - 22 kHz ± 2 dB (in room)
Sensitivity87 dB
Impedance8 Ω (6.4 Ω minimum)
Recommended amplifier power50 - 225 W
Crossover frequency2.5 kHz, compensated, second order

Drivers

Woofer6.5 in (16.51 cm), 3 in (7.62 cm) voice coil
Tweeter1 in (2.54 cm) aluminium / titanium dome

Connections

Speaker terminalsBi-wireable, micro-machined, gold finish
Accepted connectionsBare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in)

Placement

Placement from rear wall1 - 6 ft (30.48 - 182.88 cm)
Placement distance apart4 - 12 ft (121.92 - 365.76 cm)
Break-in time100 - 150 hours

Physical

Dimensions (W × H × D)198.1 × 914.4 × 292.1 mm (7.8 × 36 × 11.5 in)
Weight20.53 kg (45.2 lb)
DecouplingArticulated front claw and black enamelled aluminium skid plate, black rubber bearings
Back plateBlack anodised aluminium
FinishHigh-gloss multi-coat polyester

Versions

FOREST-SIGNATURE-DUSKDusk
FOREST-SIGNATURE-HIGH-GLOSS-CHERRYHigh Gloss Cherry
FOREST-SIGNATURE-HIGH-GLOSS-MAHOGANYHigh Gloss Mahogany
FOREST-SIGNATURE-ICEIce

Product overview

The Totem Acoustic Forest Signature is a two-way columnar floorstanding speaker that celebrates and culminates the evolution of the Forest: a 6.5-inch woofer with a 3-inch voice coil, a 1-inch aluminium / titanium dome tweeter, a micro-precision crossover and an articulated claw with skid plate.

From its introduction, the Forest became an enduring favourite among audiophiles. The Forest Signature is an upgrade in every respect, from its critical components to its final acoustic performance, and offers great musicality and spatial imaging while faithfully rendering subtlety and the attack and decay of harmonics. It is designed for both stereo and multichannel listening.

Every Forest Signature woofer and tweeter is individually inspected, measured and tested to Totem's own quality procedures. The 6.5-inch (16.51 cm) woofer has a 3-inch (7.62 cm) voice coil and the tweeter a 1-inch (2.54 cm) aluminium / titanium dome. The micro-precision customised crossover, compensated second order at 2.5 kHz, uses non-resonant capacitors with bypass capacitors, oxide / metal foil resistors and massive air-core inductors.

At the base, an articulated front claw and a black, enamelled aluminium skid plate adjust the rake angle of the cabinet for optimal bass loading and phase / space articulation. Micro-machined bi-wire terminals sit on a black anodised aluminium back plate, and the cabinet comes in high-gloss, multi-coat polyester finishes: Dusk, Ice and the veneers High Gloss Cherry (rift cherry) and High Gloss Mahogany (ribbon stripe mahogany).

Frequency response (± 2 dB, in room) 28 Hz - 22 kHz
Sensitivity 87 dB
Recommended amplifier power 50 - 225 W
Impedance (6.4 Ω minimum) 8 Ω

Key features

  • Culmination of the Forest evolution: a columnar two-way speaker upgraded in every respect
  • 6.5-inch woofer with 3-inch voice coil
  • 1-inch aluminium / titanium dome tweeter
  • Every woofer and tweeter individually inspected, measured and tested
  • Micro-precision customised crossover, 2.5 kHz compensated, second order
  • Non-resonant capacitors with bypass capacitors, oxide / metal foil resistors and massive air-core inductors
  • Adjustable rake angle: articulated front claw and black enamelled aluminium skid plate
  • Micro-machined bi-wire terminals on a black anodised aluminium back plate
  • High-gloss multi-coat polyester finishes, including rift cherry and ribbon stripe mahogany veneers
  • Optional mass loading for extra stability

Made for

  • Stereo music listening in living rooms and dedicated listening rooms
  • Multichannel systems, as front left and right speakers
  • Hard floors and carpets, with or without the bearings under the claw and skid plate

Placement and set-up

  • 1 - 6 ft (30.48 - 182.88 cm) from the rear wall
  • 4 - 12 ft (121.92 - 365.76 cm) between the speakers
  • No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other
  • Adjust the threaded insert of the front claw to set the rake of the cabinet
  • Break-in: 100 - 150 hours of music, without very loud levels during that time

In the box

  • Forest Signature loudspeaker
  • Articulated claw and skid plate with fixing hardware
  • Black rubber bearings
  • Jumpers fitted between the terminals

Connections

  • Micro-machined bi-wire terminals (two sets) on a black anodised aluminium back plate, for single-wire, bi-wire or bi-amp connection
  • The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
  • Jumpers installed at the factory for single-wire connection

Finishes

  • Dusk: high-gloss multi-coat polyester
  • Ice: high-gloss multi-coat polyester
  • High Gloss Cherry: rift cherry veneer
  • High Gloss Mahogany: ribbon stripe mahogany veneer

Totem Acoustic Forest Signature: frequently asked questions

What is new in the Forest Signature?

Totem describes it as an upgrade in every respect over the Forest, from the critical components to the final acoustic performance: individually tested drivers, a micro-precision crossover with premium parts, an adjustable rake via the articulated claw and skid plate, and high-gloss finishes.

What amplifier does the Forest Signature need?

Totem recommends 50 - 225 W. The impedance is 8 Ω with a 6.4 Ω minimum. More clean power is safer than an amplifier pushed into distortion: turn the volume down as soon as distortion starts.

How should the Forest Signature be placed?

Totem specifies 1 - 6 ft (30.48 - 182.88 cm) from the rear wall and 4 - 12 ft (121.92 - 365.76 cm) between the speakers. No toe-in is needed; set the rake with the front claw and fine-tune in small steps.

Can the Forest Signature be mass loaded?

Yes, as an option. With the speaker laid face down, fill only the lower opening with clean dry sand, silica sand or similar dry matter and seal it with the transparent cover; never fill the upper cavity, which is for bass reflex and air control. Empty it before transporting the speaker.

How long does the Forest Signature take to break in?

Totem specifies 100 - 150 hours of music playing. Avoid very loud levels during that time.

Where can I buy the Totem Acoustic Forest Signature in India?

The Totem Acoustic Forest Signature is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo listening room

Music lovers setting up a dedicated listening room or the main stereo system in a living room.

Connections

ConnectTo
Streamer, CD player or turntable with phono stageIntegrated amplifier input
Integrated amplifier L / R speaker outputs (50 - 225 W)Forest Signature terminals, jumpers in place

Setup

  1. Fit the claw and skid plate first, with the speaker resting on its top on the packaging foam end cap.
  2. Stand the speakers 1 - 6 ft (30.48 - 182.88 cm) from the rear wall and 4 - 12 ft (121.92 - 365.76 cm) apart.
  3. Sit about 1.5 times the speaker spacing away.
  4. With everything switched off, connect red (+) to red (+) and black (-) to black (-), leaving the jumpers in place.
  5. Point the speakers straight ahead: no toe-in is needed.
  6. Play music for 100 - 150 hours at moderate levels to break the speakers in.

Tip: Closer to the wall gives more bass but less soundstage depth: move the speakers in small steps.

Workflow 2: Fitting the claw and skid plate

Owners setting up the Forest Signature on marble, tile, wooden floors or carpet.

Connections

ConnectTo
Articulated claw with threaded insertPre-drilled hole at the front of the base
Skid plate, feet at the backPre-drilled holes in the base

Setup

  1. Lay the speaker on its top, protected by the packaging foam end cap.
  2. Insert a screw into the claw, use it as a guide to find the pre-drilled hole and tighten it while pushing the claw flush against the cabinet.
  3. Position the skid plate with the protruding feet at the back of the cabinet and attach it with the supplied hardware.
  4. Insert the black rubber bearings under the claw and the skid-plate feet, or leave them out, depending on the floor.
  5. Stand the speaker up and turn the threaded insert of the claw to set the rake.

Tip: The rake sets bass loading and phase / space articulation: adjust in small steps while listening.

Workflow 3: Mass loading for extra stability

Owners who want a more planted speaker on wooden floors or in busy family rooms.

Connections

ConnectTo
Clean dry sand, silica sand or other dry particulate matterLower cavity of the Forest Signature

Setup

  1. Lay the speaker face down against a low piece of furniture, taking care not to crush the tweeter or scratch the finish.
  2. Fill only the lower opening, never the upper cavity used for bass reflex and air control.
  3. Use a funnel and add the mass in small amounts, listening between steps.
  4. Seal the opening with a transparent mass loading cover; repeat for the other speaker.

Tip: Overloading tends to reduce the image, and the cavity must be emptied before the speaker is transported.

Workflow 4: Bi-wired stereo with Totem Tress cable

Listeners who want separate cable runs to the woofer and tweeter sections.

Connections

ConnectTo
Amplifier L / R speaker outputsTotem bi-wire Tress speaker cable
Bi-wire ends of the cableBoth sets of Forest Signature terminals, jumpers removed

Setup

  1. Switch the amplifier off before making any connection.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one pair of conductors to each set of terminals, keeping the polarity the same everywhere.
  4. Switch on at low volume and check that bass and treble play from each speaker.

Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.

Workflow 5: Bi-amped stereo system

Enthusiasts who drive the woofer and tweeter sections from separate amplifier channels.

Connections

ConnectTo
Preamplifier L / R outputsTwo identical stereo power amplifiers
One amplifier channel per set of terminalsForest Signature terminals, jumpers removed

Setup

  1. Switch all equipment off and read the amplifier manual's bi-amp instructions.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one amplifier channel to each set of terminals, keeping the same polarity throughout.
  4. Switch on, start at low volume and check that both sections of each speaker play.

Tip: Stay within the recommended 50 - 225 W and turn the volume down at the first sign of distortion.

Workflow 6: Multichannel music and cinema room

Listeners who want the same front speakers for stereo music and multichannel films.

Connections

ConnectTo
Media playerAV receiver or AV processor HDMI input
Front L / R outputsForest Signature terminals
Centre and surround outputsTotem centre and surround speakers

Setup

  1. Place the Forest Signature speakers as for stereo, either side of the screen.
  2. Centre the centre channel to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor.
  3. Place the surrounds behind and beside the seating at about 6 ft (183 cm) high; in 7.1 add back surrounds behind the listening position.
  4. Set distances and levels in the AV receiver, then fine-tune positions.

Tip: Totem's website lists the matching centre channel for each main speaker.

Request a Quote

TOTEM ACOUSTIC Forest Signature

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›