TOTEM ACOUSTIC KIN Sub 10 product guide and data sheet cover
‹
TOTEM ACOUSTIC KIN Sub 10 product guide and data sheet coverTOTEM ACOUSTIC KIN Sub 10 data sheet page 2: Expressive powerTOTEM ACOUSTIC KIN Sub 10 data sheet page 3: Controls for any room and any speakersTOTEM ACOUSTIC KIN Sub 10 data sheet page 4: Wired or wirelessTOTEM ACOUSTIC KIN Sub 10 data sheet page 5: PlacementTOTEM ACOUSTIC KIN Sub 10 data sheet page 6: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC KIN Sub 10

PRICE ON ENQUIRY

Category: Home Theatre Subwoofers | Series: KIN

Totem Acoustic KIN Sub 10 sealed powered subwoofer: 10-inch fibreglass woofer, 300 W Class D, 27 - 200 Hz, BASS EQ, wireless option. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

DesignPowered subwoofer
EnclosureSealed

Driver

Woofer10-inch cone of high-tensile spun fibreglass strands, top-coated and bonded to a cellulose core; vented magnetics with an oversized ferrite magnet assembly; butyl rubber surround
Voice coilHigh-temperature enamel resin coated copper wire wound on a vented aluminium former

Amplifier and controls

AmplifierClass D, 300 W
Frequency response27 Hz - 200 Hz
CrossoverVariable, 50 Hz - 150 Hz, 24 dB/octave
PhaseVariable, 0 - 180 degrees
VolumeVariable
BASS EQNatural / High Impact
Power modesAuto / On
LEDGreen = on, red = standby, blue = wireless

Connections

InputsStereo RCA / LFE / wireless (with the LINK wireless transmitter)
PowerAC input with accessible fuse; voltage 220-240 V or 100-120 V, set by Totem

Physical

Dimensions (H × W × D)330 × 292 × 345 mm (13 × 11.5 × 13.5 in)
Weight14 kg (30.86 lb)
AccessoriesMagnetic grille, adhesive feet, power cord
Break-in timeAt least 85 - 100 hours

Versions

KIN-SUB-10-SATIN-WHITESatin White
KIN-SUB-10-SATIN-BLACKSatin Black

Product overview

The Totem Acoustic KIN Sub 10 is a compact sealed powered subwoofer with a 10-inch reinforced fibreglass woofer, a 300 W Class D amplifier, a two-setting BASS EQ and an optional wireless connection, reaching down to 27 Hz.

The KIN Sub 10 is part of the versatile KIN family: perfectly proportioned and packed with Totem technology, it adds the bass excitement to music, films and video games, and it is designed to blend seamlessly with Totem speakers in stereo or home theatre. Its 10-inch cone is made of high-tensile spun fibreglass strands, top-coated and bonded to a cellulose core, in a butyl rubber surround, and it is driven by vented magnetics with an oversized ferrite magnet assembly for tremendous dynamic capacity. The voice coil is high-temperature enamel resin coated copper wire wound on a vented aluminium former.

The digital 300 W Class D amplifier was developed in tandem with the woofer, so the two harmonise for bass that is thunderous yet musical. The sealed enclosure gives consistent performance regardless of placement, and ultra low-profile feet isolate the cabinet from the floor.

Variable volume, phase (0 - 180 degrees) and crossover (50 - 150 Hz, 24 dB/octave) controls tailor the output to the room, the speakers and personal taste. The BASS EQ has two settings: Natural is pure and linear, for tight, musical bass, while High Impact raises the output in the lowest range by several dB for more intense bass energy, often preferred for home theatre and gaming.

Stereo RCA and LFE inputs connect the KIN Sub 10 to most amplifiers and AV receivers. For more freedom of placement, the optional LINK wireless transmitter adds a wireless connection from an amplifier or powered speaker with a subwoofer output, including the KIN Amp, and the sub pairs wirelessly with the KIN Play sound bar without the LINK. It comes in Satin White and Satin Black, each with a matching magnetic grille.

Frequency response 27 - 200 Hz
Class D amplifier 300 W
Reinforced fibreglass woofer 10-inch
Enclosure Sealed

Key features

  • 10-inch reinforced fibreglass woofer: spun fibreglass strands bonded to a cellulose core, butyl rubber surround
  • Vented magnetics with an oversized ferrite magnet assembly
  • 300 W Class D high-efficiency amplifier, developed in tandem with the woofer
  • Sealed enclosure for consistent performance regardless of placement
  • BASS EQ: Natural (pure and linear) or High Impact (several dB more in the lowest range)
  • Variable volume, phase (0 - 180 degrees) and crossover (50 - 150 Hz, 24 dB/octave)
  • Stereo RCA and LFE inputs
  • Wireless option with the LINK wireless transmitter; pairs with the KIN Play sound bar without it
  • Auto / On power modes with signal sensing
  • Ultra low-profile feet; compact for easy home integration
  • Satin White or Satin Black with matching magnetic grille

Made for

  • Stereo systems with Totem speakers or other speakers
  • Home theatre and TV systems with an AV receiver
  • Compact KIN systems with the KIN Force, KIN Solo, KIN Amp or KIN Play
  • Music, films and video games
  • Rooms of any size

In the box

  • KIN Sub 10 powered subwoofer
  • Magnetic grille
  • 4 adhesive-backed feet
  • Power cord

Connections

  • Line in: stereo RCA left and right inputs
  • LFE input (L/LFE) for a receiver's subwoofer or LFE output
  • Wireless: PAIR button for the LINK wireless transmitter
  • AC input with accessible fuse; main power switch; voltage selector set by Totem for the destination country

Finishes

  • Satin White, with matching magnetic grille
  • Satin Black, with matching magnetic grille

Totem Acoustic KIN Sub 10: frequently asked questions

How do I connect the KIN Sub 10 to an AV receiver?

Connect the receiver's SUB or LFE output to the L/LFE input with a subwoofer cable. With bass management or room correction in the receiver, set the sub's volume to 80 %, the crossover to its highest point and the phase to 0.

Can it be used with a stereo amplifier?

Yes. If the amplifier has stereo pre-outputs, connect them to the left and right line inputs with a stereo RCA cable. The speakers keep playing the bass, and the sub's volume, crossover and phase controls blend it with them.

Can the KIN Sub 10 work wirelessly?

Yes, with the optional LINK wireless transmitter: press PAIR on the LINK and then on the sub. The LED turns blue for wireless. The KIN Play sound bar pairs with the sub without the LINK.

What do the Natural and High Impact settings do?

Natural is pure and linear and gives tight, musical bass. High Impact increases the output by several dB in the lower range of the sub's frequencies, often preferred for home theatre and gaming.

Where should the subwoofer go?

In stereo, generally between the main speakers or close beside them; in a home cinema, in a corner, but not too close to it and not equidistant from the two walls. A good method: put the sub at the listening position, play music with strong bass, walk the room and place the sub where the bass sounds best.

Where can I buy the Totem Acoustic KIN Sub 10 in India?

The Totem Acoustic KIN Sub 10 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Home theatre with an AV receiver

Families adding deep, impactful bass to a 5.1 or 7.1 system in the living room or a media room.

Connections

ConnectTo
AV receiver SUB / LFE outputKIN Sub 10 L/LFE input (subwoofer cable)
Mains socketKIN Sub 10 AC input (supplied power cord)

Setup

  1. Before connecting, set the main power switch to OFF and the volume dial to minimum.
  2. Place the sub in a corner of the room, not too close to it and not equidistant from the two walls.
  3. Connect the receiver's SUB or LFE output to the L/LFE input.
  4. Set the sub's volume to 80 %, the crossover to its highest point and the phase to 0, and let the receiver's bass management handle the rest.
  5. Choose High Impact on the BASS EQ for more intense bass in films, or Natural for linear bass.

Tip: Too close to the corner, the sub starts to sound congested and loses detail.

Workflow 2: Stereo music system with an integrated amplifier

Music lovers who want to extend the bass of a stereo pair of bookshelf or floorstanding speakers.

Connections

ConnectTo
Integrated amplifier stereo pre-outputs (L / R)KIN Sub 10 line inputs, left and right (stereo RCA cable)
Amplifier speaker outputsMain speakers

Setup

  1. Place the sub between the main speakers or close beside them.
  2. Connect the stereo pre-outputs to the left and right line inputs.
  3. Set the crossover around 40 - 70 Hz for floorstanding speakers, 70 Hz and above for bookshelf speakers.
  4. With the main speakers at a normal level, raise the sub's volume from MIN until the bass blends.
  5. Have someone turn the phase dial while you sit at the listening position; keep the setting with the fullest bass.

Tip: Choose Natural on the BASS EQ for tight, musical bass.

Workflow 3: Wireless sub with the LINK transmitter

Rooms where a cable to the subwoofer would be hard to hide.

Connections

ConnectTo
Amplifier or powered speaker subwoofer outputLINK wireless transmitter
LINK wireless transmitterKIN Sub 10 (wireless, paired)

Setup

  1. Connect the LINK transmitter to the subwoofer output of the amplifier or powered speaker, as its manual describes.
  2. Place the KIN Sub 10 where the bass sounds best and connect its power cord.
  3. Press the PAIR button on the LINK, then on the sub.
  4. Check that the sub's LED is blue, then set the volume, crossover and phase.

Tip: With the LINK, placement options become almost boundless: walk the room to find where the bass sounds best.

Workflow 4: KIN Play sound bar and KIN Sub 10

Living rooms and bedrooms that want a simple TV system with real bass.

Connections

ConnectTo
KIN Play sound barKIN Sub 10 (wireless pairing, no LINK needed)

Setup

  1. Place the KIN Sub 10 near the front of the room, beside the TV unit or in a corner.
  2. Fit the four adhesive feet and connect the power cord.
  3. Pair the sub wirelessly with the KIN Play, following the KIN Play instructions.
  4. Set the BASS EQ to High Impact for films and gaming or Natural for music.

Tip: The sealed cabinet gives consistent performance wherever it is placed.

Workflow 5: Discreet KIN system for a big screen

Apartments and media rooms with the KIN Force or a pair of KIN Solo on the wall.

Connections

ConnectTo
AV receiver left, centre and right outputsKIN Force or KIN Solo speakers
AV receiver SUB / LFE outputKIN Sub 10 L/LFE input

Setup

  1. Mount the KIN on-wall speakers above, below or beside the screen.
  2. Place the KIN Sub 10 in a front corner or beside the TV unit.
  3. Connect the receiver's subwoofer output to the L/LFE input.
  4. Run the receiver's speaker set-up, then fine-tune the sub's position in small steps.

Tip: Totem pairs the KIN Force and the KIN Solo with the KIN Sub 10 for a discreet system with big sound.

Workflow 6: Gaming room

Gamers who want physical bass impact from a compact cabinet.

Connections

ConnectTo
ConsoleAV receiver HDMI input
AV receiver SUB / LFE outputKIN Sub 10 L/LFE input

Setup

  1. Place the sub near the front of the room on its adhesive feet.
  2. Connect the receiver's subwoofer output to the L/LFE input.
  3. Set the BASS EQ to High Impact.
  4. Use the Auto power mode so the sub wakes when a signal arrives and returns to standby when there is none.

Tip: Allow at least 85 - 100 hours of break-in and avoid very loud levels during that time.

Request a Quote

TOTEM ACOUSTIC KIN Sub 10

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›