



TOTEM ACOUSTIC Tribe On-Wall
PRICE ON ENQUIRY
Totem Acoustic Tribe On-Wall slim two-way speaker: 4-inch MHEX cones, 33 mm soft dome, 51 Hz - 30 kHz, for TV, LCR and surround. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| System design | Dual ported, 2-way |
| Frequency response | 51 Hz - 30 kHz ± 3 dB |
| Sensitivity (1 W/1 m) | 88 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 50 - 130 W |
| Crossover point | 2.4 kHz, first order |
Drivers
| Mid-bass drivers | 4 in MHEX Hi Definition cone |
| Tweeter | 1.3 in (33 mm) laser-etched textile soft dome |
Physical
| Dimensions (W × H × D) | 149.9 × 1016 × 88.9 mm (5.9 × 40 × 3.5 in), without grille |
| Grille | Magnetic, included |
| Mounting | Wall-mounting bracket included |
| Made in | Canada |
Versions
| TRIBE-ON-WALL-SATIN-WHITE | Satin White |
| TRIBE-ON-WALL-SATIN-BLACK | Satin Black |
Product overview
The Totem Acoustic Tribe On-Wall is a slim, dual-ported two-way on-wall speaker, only 89 mm deep, with 4-inch MHEX Hi Definition cone mid-bass drivers and a 33 mm laser-etched textile soft dome tweeter, designed for use under a TV, as left, centre and right speakers, or in 5-channel and 7-channel home theatres.
Designed and made in Canada, the Tribe On-Wall brings the musicality, scale and refinement of a high-performance Totem loudspeaker to a remarkably slim, room-friendly format. It aims for the scale, openness and natural presentation normally associated with well-designed floorstanding speakers, from a cabinet that hangs flat on the wall.
Its defining quality is the way several Tribe On-Wall speakers work together: they interact so fluidly that the individual speakers seem to disappear and a multichannel system sounds like one continuous source. Centre imaging and centre fill are tightly focused, the soundstage can reach behind the speakers and beyond the side walls, and Totem's wide off-axis dispersion keeps the presentation natural away from the centre seat. Low-level intelligibility keeps dialogue and fine detail clear at modest volumes, for effortless, non-fatiguing music and film sessions.
The two-way design uses a first-order crossover at 2.4 kHz, the same philosophy of simple, carefully executed crossovers found in Totem's Bison loudspeakers, to preserve phase integrity, coherence and natural musical flow. The cabinet is dual ported, and the speaker presents an 8 Ω load with 88 dB sensitivity (1 W/1 m) for amplifiers or AV receivers of 50 - 130 W.
The Tribe On-Wall blends with a wide range of Totem floorstanding, on-wall and in-wall models, and pairs with the KIN Sub 10 or Tribe Solution Sub subwoofers. It comes with a magnetic grille and a wall-mounting bracket, in Satin Black or Satin White.
| Frequency response (± 3 dB) | 51 Hz - 30 kHz |
| Sensitivity (1 W/1 m) | 88 dB |
| Recommended amplifier power | 50 - 130 W |
| Impedance | 8 Ω |
Key features
- Slim on-wall speaker: 150 mm wide, 89 mm deep without grille
- Dual-ported two-way design
- 4-inch MHEX Hi Definition cone mid-bass drivers
- 1.3-inch (33 mm) laser-etched textile soft dome tweeter
- First-order crossover at 2.4 kHz for phase integrity and coherence
- Flexible use: single speaker under a TV, dedicated left / centre / right, or 5- and 7-channel systems
- Seamless interaction between multiple speakers for one coherent sound field
- Wide off-axis dispersion and clear low-level dialogue
- Blends with Totem floorstanding, on-wall and in-wall models
- Magnetic grille and wall-mounting bracket included
- Satin Black or Satin White
- Designed and made in Canada
Made for
- A single speaker mounted under a TV
- Dedicated left, centre and right speakers
- 5-channel and 7-channel home theatre systems
- Music and film listening in living rooms and media rooms
- Systems with a KIN Sub 10 or Tribe Solution Sub subwoofer
In the box
- Tribe On-Wall speaker
- Magnetic grille
- Wall-mounting bracket
Connections
- Speaker terminals (+ / -) for connection to an amplifier or AV receiver channel
Finishes
- Satin Black
- Satin White
Totem Acoustic Tribe On-Wall: frequently asked questions
How can the Tribe On-Wall be used?
As a single speaker under a TV, as dedicated left, centre and right speakers, or as part of a 5-channel or 7-channel home theatre. It can be mounted vertically or horizontally, as the official photographs show.
What amplifier does it need?
Totem recommends 50 - 130 W into its 8 Ω impedance, with a sensitivity of 88 dB (1 W/1 m). Any quality stereo amplifier or AV receiver in that range will drive it.
Which subwoofer goes with it?
Totem says it pairs perfectly with its KIN Sub 10 or Tribe Solution Sub subwoofers.
Is a wall bracket included?
Yes. A wall-mounting bracket and a magnetic grille come with the speaker.
Where can I buy the Totem Acoustic Tribe On-Wall in India?
The Totem Acoustic Tribe On-Wall is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Single speaker under the TV
Living rooms that want one slim speaker for TV sound and music.
Connections
| Connect | To |
|---|---|
| TV audio output | Amplifier or AV receiver input |
| Amplifier speaker output (50 - 130 W recommended) | Tribe On-Wall terminals |
Setup
- Run the speaker cable in or along the wall to the position under the TV.
- Fix the supplied wall bracket level under the screen.
- Connect the cable with the amplifier switched off, red to red and black to black.
- Hang the speaker horizontally on the bracket and attach the magnetic grille.
Tip: Low-level intelligibility keeps dialogue clear even at modest late-night volumes.
Workflow 2: On-wall LCR front stage
Home theatres that want left, centre and right speakers on the wall.
Connections
| Connect | To |
|---|---|
| Media player or TV HDMI (eARC) | AV receiver HDMI |
| AV receiver L / C / R outputs | Three Tribe On-Wall speakers |
Setup
- Mount two speakers vertically either side of the screen.
- Mount the third horizontally, centred under the screen.
- Connect all three with the receiver switched off, checking polarity.
- Run the receiver's speaker set-up and level calibration.
Tip: Three identical speakers give seamless pans and a tightly focused centre image.
Workflow 3: 5.1 on-wall home theatre
Families who want full surround sound without floor speakers.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R | Three Tribe On-Wall |
| Surround outputs | Two Tribe On-Wall |
| Subwoofer pre-out | KIN Sub 10 or Tribe Solution Sub |
Setup
- Mount the front three as an LCR stage around the screen.
- Mount the surrounds behind and beside the listening area, at about 6 ft (183 cm) high.
- Place the subwoofer; closer to a corner gives more bass.
- Calibrate levels and crossover in the receiver.
Tip: Using the same speaker all round lets the whole system sound like one continuous source.
Workflow 4: 7.1 media room
Media rooms that want a larger surround system.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R | Three Tribe On-Wall |
| Side and rear surround outputs | Four Tribe On-Wall |
| Subwoofer pre-out | Totem subwoofer |
Setup
- Mount the LCR stage around the screen.
- Mount side surrounds beside the seats and rear surrounds behind the listening position.
- Connect every speaker with the equipment off.
- Run the receiver's calibration and fine-tune levels by ear.
Tip: Wide off-axis dispersion keeps the presentation natural for every seat.
Workflow 5: Mixed Totem system
Owners adding on-wall speakers to an existing Totem system.
Connections
| Connect | To |
|---|---|
| AV receiver front outputs | Totem floorstanding speakers |
| Centre or surround outputs | Tribe On-Wall speakers |
Setup
- Keep the existing Totem floorstanders as the front left and right.
- Use a Tribe On-Wall horizontally as the centre or vertically as surrounds.
- Connect with correct polarity.
- Balance the levels in the receiver.
Tip: Totem designed the Tribe On-Wall to blend with its floorstanding, on-wall and in-wall models.
Workflow 6: Stereo music on the wall
Apartments where floor space is short but music matters.
Connections
| Connect | To |
|---|---|
| Streamer or CD player | Integrated amplifier |
| Amplifier L / R outputs | Two Tribe On-Wall speakers |
| Subwoofer output (optional) | KIN Sub 10 or Tribe Solution Sub |
Setup
- Mount the speakers vertically either side of the TV or media unit.
- Connect with the amplifier switched off.
- Add a Totem subwoofer for deeper bass if wanted.
- Remove the grilles for focused listening.
Tip: Keep the amplifier within its clean power and turn down at the first sign of distortion.








