TOTEM ACOUSTIC Tribe Solution Sub product guide and data sheet cover
‹
TOTEM ACOUSTIC Tribe Solution Sub product guide and data sheet coverTOTEM ACOUSTIC Tribe Solution Sub data sheet page 2: A beauty and a beastTOTEM ACOUSTIC Tribe Solution Sub data sheet page 3: Dual 8-inch woofers, 500 W Class DTOTEM ACOUSTIC Tribe Solution Sub data sheet page 4: Controls and connectionsTOTEM ACOUSTIC Tribe Solution Sub data sheet page 5: Placement, orientation and specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Tribe Solution Sub

PRICE ON ENQUIRY

Category: Home Theatre Subwoofers | Series: TRIBE

Totem Acoustic Tribe Solution Sub: slim sealed powered subwoofer, dual 8-inch woofers, 500 W Class D, 26 Hz - 200 Hz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

DesignPowered subwoofer
EnclosureSealed
Frequency response26 Hz - 200 Hz

Amplifier

AmplifierClass D, 500 W
CrossoverVariable low-pass, 40 Hz - 200 Hz, 24 dB/octave
PhaseVariable, 0 - 180 degrees
VolumeVariable
BASS EQNatural / High Impact
Power modesAuto (wired) / Wireless / On; auto standby after about 20 minutes without signal

Drivers

WoofersDual 8-inch cones of high-tensile spun fibreglass strands, top-coated and bonded to a cellulose core; anodised aluminium dust cap
MotorVented magnetics with an oversized ferrite magnet assembly
SurroundButyl rubber
Voice coilHigh-temperature enamel resin coated copper wire on a vented black aluminium former

Inputs and outputs

InputsStereo RCA (L / R), LFE, wireless (with the optional Totem LINK transmitter)
PowerAC inlet with fuse holder, removable right-angle power cord, main power switch

Physical

Cabinet (horizontal, W × H × D)610 × 332 × 115 mm (24.01 × 13.07 × 4.52 in)
Horizontal on adhesive feet610 × 336 × 115 mm
Vertical on base332 × 648 × 203 mm (13.07 × 25.5 × 8 in)
On its back on tall feet332 × 165 × 610 mm (13.07 × 6.5 × 24.01 in)
Weight17.38 kg (38.35 lb)
GrilleMagnetic, included
Break-in timeAt least 85 - 100 hours
Supplied accessoriesTwo bases, magnetic grille, adhesive feet, tall feet and bolts, power cord

Versions

TRIBE-SOLUTION-SUB-SATIN-WHITESatin White
TRIBE-SOLUTION-SUB-SATIN-BLACKSatin Black

Product overview

The Totem Acoustic Tribe Solution Sub is a slim, sealed powered subwoofer with dual 8-inch woofers and a 500 W Class D amplifier, reaching down to 26 Hz from a cabinet only 115 mm deep. It can stand horizontally, vertically or lie on its back under furniture.

The spectacular form of the Tribe Solution Sub sets it apart from conventional subwoofer design, and its output and frequency depth contradict its appearance: it is both a beauty and a beast. Two 8-inch woofers deliver the bass, with cones made of high-tensile spun fibreglass strands, top-coated and bonded to a cellulose core, driven by vented magnetics with an oversized ferrite magnet assembly and held by a butyl rubber surround. The reinforced fibreglass balances strength and lightness for bass that is both powerful and musical, and an anodised aluminium dust cap dissipates heat, so the whole motor structure runs cool and reliably.

The custom-designed 500 W amplifier drives the woofers with controlled ferocity. Its compact digital Class D design runs cooler and more efficiently than conventional amplifiers, which is what permits the slim proportions and the sealed enclosure. The sealed cabinet gives consistent performance regardless of placement, so the output stays prodigious whether the sub is flush to a wall, concealed in a cabinet or displayed like a piece of artwork.

On the rear panel a variable low-pass crossover (40 - 200 Hz, 24 dB/octave), variable phase (0 - 180 degrees) and variable volume blend the sub with the main speakers. A two-position BASS EQ offers Natural, pure and linear for tight, musical bass, and High Impact, which raises the lower range by several dB for more intense bass energy, often preferred for home theatre and gaming. Stereo RCA and LFE inputs take a wired signal, and a PAIR button connects the sub to the optional Totem LINK wireless transmitter.

Two bases are supplied, a wider one for horizontal and a smaller one for vertical placement, together with adhesive feet, four tall feet with bolts for lying the sub on its back under furniture, a magnetic grille and a removable right-angle power cord. Designed by Totem Acoustic in Montreal, Canada, the Tribe subwoofers are made to blend seamlessly with Totem speakers in any stereo or home theatre system.

Frequency response 26 Hz - 200 Hz
Class D amplifier 500 W
Fibreglass woofers 2 × 8-inch
Cabinet depth 115 mm

Key features

  • Dual 8-inch reinforced fibreglass woofers with anodised aluminium dust caps and butyl rubber surrounds
  • 500 W Class D amplifier, custom designed, high efficiency, runs cool
  • Sealed enclosure for consistent performance regardless of placement
  • Slim cabinet only 115 mm (4.52 in) deep
  • Multiple orientations: horizontal, vertical or on its back under furniture
  • BASS EQ with Natural and High Impact settings
  • Variable low-pass crossover 40 - 200 Hz (24 dB/octave), variable phase 0 - 180 degrees, variable volume
  • Stereo RCA (left / right) and LFE inputs
  • Wireless option with the Totem LINK transmitter (PAIR button on the sub)
  • Auto standby after about 20 minutes without signal, or always-on mode
  • Satin Black or Satin White, with matching magnetic grille

Made for

  • Stereo systems, placed between or beside the main speakers
  • Home cinema and living-room TV systems, placed near a corner
  • Music, films, TV and video games
  • Rooms where the sub must hide under furniture, sit flush to a wall or go inside a cabinet
  • Systems with an amplifier or powered speakers, wired or wireless with the LINK transmitter

Placement and set-up

  • Stereo: between the main speakers or close beside them
  • Home cinema: near a corner, but not too close to it and not equidistant from the two walls
  • Find the best spot by placing the sub at the listening position, playing bass-rich content and walking the room: put the sub where the bass sounds best
  • Horizontal on hardwood floors with the adhesive feet, or on either base for stability on any surface, including carpet
  • Stacking the front feet of the horizontal base two high tilts the cabinet slightly upwards to project bass into the listening area
  • Keep at least 10 cm around the sub for ventilation and keep it away from heat sources and moisture
  • Break-in: at least 85 - 100 hours of actual playing, without very loud levels during that time

In the box

  • Tribe Solution Sub
  • Two bases (horizontal and vertical) with metal brackets and hardware
  • Magnetic grille
  • Six adhesive-backed feet
  • Four tall feet and bolts
  • Removable right-angle power cord

Connections

  • Stereo RCA inputs, left and right (left doubles as the LFE input)
  • LFE input for a receiver or processor with a single subwoofer output
  • Wireless input with the optional Totem LINK transmitter (PAIR button and status LED)
  • AC power inlet with fuse holder; removable right-angle power cord
  • Main power switch

Finishes

  • Satin White, with matching magnetic grille
  • Satin Black, with matching magnetic grille

Totem Acoustic Tribe Solution Sub: frequently asked questions

Which way can the Tribe Solution Sub stand?

Horizontally on adhesive feet or on the wider base, vertically on the smaller base, or on its back with the woofers facing upwards on the four tall feet, so it can slide under furniture. Thanks to the sealed enclosure the output stays strong in every orientation.

How do I connect the Tribe Solution Sub to an AV receiver?

Run a subwoofer cable from the receiver's SUB OUT (also called LFE out or pre-out) to the LFE input. When the receiver handles bass management or room correction, set the sub's volume to about 80 %, its crossover to the highest point and its phase to 0.

Can I use it with a stereo amplifier?

Yes. Connect the amplifier's stereo pre-outputs to the sub's left and right RCA inputs. The main speakers keep playing bass, and you blend the sub with its volume, crossover and phase controls: Totem suggests 40 - 70 Hz with floor-standing speakers and 70 Hz and above with bookshelf speakers.

Does the Tribe Solution Sub work wirelessly?

Yes, with the optional Totem LINK wireless transmitter connected to the amplifier or powered speaker. Press PAIR on the LINK and then on the sub, and set the power mode to Wireless (WL); the red / green LED shows the status.

What do the Natural and High Impact settings do?

Natural is pure and linear, for tight, musical bass. High Impact raises the output in the lower range by several dB for more intense bass, a setting often preferred for home theatre and gaming.

Where can I buy the Totem Acoustic Tribe Solution Sub in India?

The Totem Acoustic Tribe Solution Sub is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo system with an integrated amplifier

Music lovers adding deep, tight bass to a pair of bookshelf or floor-standing speakers.

Connections

ConnectTo
Integrated amplifier stereo pre-outputs (L / R)Tribe Solution Sub left and right RCA inputs
Integrated amplifier speaker outputsMain speakers

Setup

  1. Place the sub between the main speakers or close beside one of them.
  2. Connect the amplifier's left and right pre-outputs to the sub's left and right inputs with a stereo RCA cable.
  3. Set the power mode to the wired (auto) setting and BASS EQ to Natural.
  4. Play music at a normal level with the sub volume at MIN, then turn it up slowly until the bass blends.
  5. Set the crossover: 40 - 70 Hz with floor-standing speakers, 70 Hz and above with bookshelf speakers.
  6. Have someone turn the phase dial while you sit at the listening position, and keep the setting that gives the fullest bass.

Tip: Once set, the bass follows the amplifier's volume control, so the balance stays the same at any level.

Workflow 2: 5.1 living-room home theatre

Families who watch films, sport and series on a big TV and want cinema-scale bass from a slim box.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver SUB OUT / LFE outTribe Solution Sub LFE input
AV receiver speaker outputsFront, centre and surround speakers

Setup

  1. Place the sub near a corner of the room, but not too close to it and not at equal distances from the two walls.
  2. Connect the receiver's subwoofer output to the LFE input with a subwoofer cable.
  3. On the sub, set volume to about 80 %, the crossover to its highest point and phase to 0.
  4. Run the receiver's bass management or room correction to set speaker size, crossover point and sub level.
  5. Choose High Impact on the BASS EQ for more intense bass with films.

Tip: If the bass sounds congested and loses detail, move the sub a little further out of the corner.

Workflow 3: Wireless sub with the Totem LINK

Rooms where no cable can run from the amplifier to the best bass position.

Connections

ConnectTo
Amplifier or powered speaker outputTotem LINK wireless transmitter
Totem LINK (wireless)Tribe Solution Sub, power mode WL

Setup

  1. Connect the LINK transmitter to the amplifier or powered speaker as its manual describes.
  2. Set the sub's power mode to Wireless (WL).
  3. Press PAIR on the LINK, then PAIR on the sub; the LED on the sub shows the status.
  4. Place the sub where the bass sounds best: play content with good bass from the listening position and walk the room to find the spot.
  5. Blend the sub with its volume, crossover and phase controls.

Tip: The sub goes to standby about 20 minutes after the signal stops and wakes as soon as it returns.

Workflow 4: Hidden under a sofa or bed

Apartments and compact living rooms where the subwoofer should not be seen.

Connections

ConnectTo
AV receiver or amplifier subwoofer / pre-outTribe Solution Sub LFE or L / R inputs

Setup

  1. Screw the supplied bolts through the four tall feet into the inserts at the corners of the cabinet.
  2. Lay the sub on its back with the woofers facing upwards.
  3. Slide it under the sofa, bed or low furniture, keeping at least 10 cm of free space around it for ventilation.
  4. Route the power cord so it cannot be walked on or pinched.
  5. Set level, crossover and phase from the listening position.

Tip: On its back the sub stands only 165 mm (6.5 in) tall.

Workflow 5: Vertical beside the TV unit

Living rooms where floor space is tight and the sub should stand like a slim panel next to the TV or a speaker.

Connections

ConnectTo
AV receiver SUB OUT or amplifier pre-outTribe Solution Sub LFE or L / R inputs

Setup

  1. Attach one metal bracket to the middle of the smaller base and four adhesive feet to its bottom corners.
  2. Stand the sub on the base so the bracket lines up with the insert centred in the cabinet, and fix it with the supplied hardware.
  3. Place it beside the TV unit or beside one of the main speakers, flush to the wall if you like: the sealed enclosure keeps the performance consistent.
  4. Fit the magnetic grille for a clean look.
  5. Connect, then blend the volume, crossover and phase.

Tip: Standing upright on its base the sub needs only 332 × 203 mm of floor.

Workflow 6: Gaming room or den

Gamers and film fans who want punchy, physical bass in a smaller room.

Connections

ConnectTo
Console or PC through an AV receiver or amplifier with a subwoofer outputTribe Solution Sub LFE input

Setup

  1. Place the sub horizontally on the wider base: attach two metal brackets to the left and right of the base and fix the sub with the supplied hardware.
  2. Stack the front feet of the base two high to angle the cabinet slightly upwards towards the seating.
  3. Connect the subwoofer output to the LFE input.
  4. Select High Impact on the BASS EQ for more intense low-range energy.
  5. Allow at least 85 - 100 hours of break-in before playing at very loud levels.

Tip: Switch BASS EQ back to Natural for tight, linear bass with music.

Request a Quote

TOTEM ACOUSTIC Tribe Solution Sub

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›