


TOTEM ACOUSTIC Tribe Trio
PRICE ON ENQUIRY
Totem Acoustic Tribe Trio passive LCR solution bar: left, centre and right in one slim ported bar for 65-inch screens. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
General
| Design | On-wall three-channel (LCR) solution bar, passive |
| Cabinet enclosure | Ported |
Acoustic performance
| Frequency response | 55 Hz - 25 kHz ± 3 dB |
| Sensitivity (1 W/1 m) | 89 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 20 - 150 W |
| Crossover frequency | 2.5 kHz (first order), hard-wired |
Drivers
| Woofers (centre) | 2 × 4 in (10.16 cm) neodymium-activated, long throw |
| Woofers (left / right) | 2 × 5.75 in (14.6 cm) long throw, copper-capped voice coil |
| Tweeters | 3 × 0.86 in (22 mm) laser-etched textile soft dome |
Connections
| Speaker terminals | Bi-wire, gold-plated |
Placement
| Placement from rear wall | Flush - 3 ft (flush - 91.44 cm) |
| Break-in time | 50 - 80 hours |
Physical
| Dimensions (W × H × D) | 1448 × 151 × 90 mm (57 × 5.94 × 3.54 in) |
| Depth with grille | 100 mm (3.93 in) |
| Weight | 12.5 kg (27.6 lb) |
| Grille | Magnetic cloth, matching colour |
| Accessories | Mounting bracket, template, hardware, adhesive feet |
Versions
| TRIBE-TRIO-SATIN-WHITE | Satin White |
| TRIBE-TRIO-SATIN-BLACK | Satin Black |
Product overview
The Totem Acoustic Tribe Trio is a passive three-channel solution bar that packs the front left, centre and right speakers into one slim, ported cabinet, sized for screens of 65 inches and larger and supplied with a flush wall bracket and isolation feet.
Tribe solution bars have the look of an active sound bar, but their passive design lets an outboard amplifier or AV receiver drive them for substantially better performance. They overcome the acoustic and physical challenges of modern living spaces: whether on the wall or on a table top, the Trio fills the room with an expansive sound field, vibrant harmonics and gripping presence, with any source, at any volume level.
The centre channel uses two neodymium-activated, long-throw 4-inch woofers either side of a 22 mm (0.86-inch) laser-etched textile soft dome tweeter, in a D'Appolito configuration. The left and right channels each pair the same tweeter with a 5.75-inch long-throw woofer with a copper-capped voice coil. A hard-wired, first-order crossover at 2.5 kHz joins the drivers, and the bar is voiced for clarity and dynamics with a wide on- and off-axis response.
Only 90 mm deep, the Trio is full range and dynamic, and it is not limited to video use. It is timbre matched with all Tribe and Kin speakers and intermixes with every Totem speaker, so surrounds, in-wall or on-wall models and subwoofers can be added for multichannel systems of any size and performance level.
Satin Black and Satin White finishes come with matching magnetic cloth grilles, and bi-wire gold-plated terminals connect to an AV receiver or amplifiers of 20 - 150 W.
| Frequency response (± 3 dB) | 55 Hz - 25 kHz |
| Sensitivity (1 W/1 m) | 89 dB |
| Recommended amplifier power | 20 - 150 W |
| Impedance | 8 Ω |
Key features
- Three full-range channels in one enclosure: front left, centre and right
- Passive design: drive it with the AV receiver or amplifiers of your choice
- Centre: two neodymium-activated, long-throw 4-inch woofers and a soft dome tweeter in a D'Appolito layout
- Left and right: 5.75-inch long-throw woofers with copper-capped voice coils
- Three 22 mm (0.86-inch) laser-etched textile soft dome tweeters
- Ported cabinet, voiced for clarity and dynamics
- Hard-wired first-order crossover at 2.5 kHz
- Sized for screens of 65 inches and larger; fits unobtrusively under a TV
- Flush wall-mounting bracket and adhesive isolation feet included
- Matching magnetic cloth grilles, Satin Black or Satin White
- Bi-wire gold-plated terminals
- Timbre matched with all Tribe and Kin speakers
Made for
- Front left, centre and right channels for a TV of 65 inches and larger
- 5.1 and larger home theatres in living rooms and media rooms
- Music, films and gaming
- Wall mounting, mantels, AV stands and low cabinets
Placement and set-up
- Flush to the wall or up to 3 ft (91.44 cm) from the rear wall
- Normal orientation: tweeters towards the top of the cabinet
- Mounted at 6 ft (about 1.8 m) or higher above the listening area: turn the bar over so the tweeters are towards the bottom
- On a flat surface: fit the six adhesive isolation feet at the front and back of the ends and the middle
- Break-in: 50 - 80 hours of music, without very loud levels during that time
In the box
- Tribe Trio solution bar, with jumpers fitted on the terminals
- Matching magnetic cloth grille
- Mounting template
- 1 wall-mounting bracket
- 8 screws of 2.5 in for wooden studs
- 8 screws of 1.5 in with plastic wall anchors for drywall
- 6 adhesive-backed isolation feet
Connections
- Bi-wire gold-plated speaker terminals for the left, centre and right channels
- Jumpers fitted for single-wire connection; remove them to bi-wire or bi-amp
Finishes
- Satin Black, with matching magnetic grille
- Satin White, with matching magnetic grille
Totem Acoustic Tribe Trio: frequently asked questions
What does the Tribe Trio replace?
It packs the front left, centre and right speakers of a home theatre into one enclosure, so a single slim bar under the screen does the work of three speakers.
Does it need an AV receiver?
Yes. The Trio is passive, so it needs an AV receiver or amplifiers with three speaker channels. Totem recommends 20 - 150 W into its 8 Ω impedance.
What size of TV does it suit?
The Trio is 1448 mm (57 in) wide and sized for screens of 65 inches and larger. It can be wall mounted on the supplied flush bracket or placed on furniture on its isolation feet.
Can it be used with other Totem speakers?
Yes. It is timbre matched with all Tribe and Kin speakers and intermixes with every Totem speaker, so surrounds and subwoofers can be added for a full multichannel system.
Where can I buy the Totem Acoustic Tribe Trio in India?
The Totem Acoustic Tribe Trio is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Wall-mounted LCR under a large TV
Living rooms with a wall-mounted TV of 65 inches or more.
Connections
| Connect | To |
|---|---|
| Media player or TV HDMI (eARC) | AV receiver HDMI |
| AV receiver front L, centre and front R outputs | Tribe Trio left, centre and right terminals |
Setup
- Run three speaker cables in or along the wall to the bar position.
- Level the template, mark the eight holes and fix the bracket with its hooks facing up.
- Connect left, centre and right with the receiver switched off, red to red and black to black.
- Align the groove on the back of the Trio with the bracket and lower it until it slides snugly into place.
- Set the receiver's front and centre speakers and run its level set-up.
Tip: Use the 2.5 in screws in wooden studs and the 1.5 in screws with anchors in drywall.
Workflow 2: 5.1 home theatre
Families who want full surround sound with a clean front wall.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R outputs | Tribe Trio |
| Surround outputs | Tribe or Kin surround speakers |
| Subwoofer pre-out | Subwoofer |
Setup
- Mount the Trio under the screen.
- Place the surrounds behind and beside the listening area at about 6 ft (183 cm) high.
- Place the subwoofer almost anywhere; closer to a corner gives more bass.
- Run the receiver's speaker set-up and check polarity on every channel.
Tip: The Trio is timbre matched with all Tribe and Kin speakers for seamless pans around the room.
Workflow 3: On an AV unit or mantel
Homes where the TV stands on furniture.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R outputs | Tribe Trio terminals |
Setup
- Decide the final position first: the adhesive feet cannot be removed without risk to the finish.
- Fit the six isolation feet at the front and back of both ends and the middle.
- Place the bar under the TV with the tweeters towards the top.
- Connect with the equipment switched off.
Tip: The isolation feet break down cabinet resonance on hard surfaces.
Workflow 4: High-mounted bar
Rooms where the bar sits above a fireplace or a tall screen.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R outputs | Tribe Trio terminals |
Setup
- If the bar will be 6 ft (about 1.8 m) or more above the seats, mount it upside down.
- Fix the bracket and mount the bar with the tweeters towards the bottom.
- Connect with correct polarity.
- Check from the seats that dialogue comes from the screen.
Tip: Turning the bar over keeps the tweeters closer to ear level.
Workflow 5: 7.1 media room
Media rooms that want a bigger system around a single front bar.
Connections
| Connect | To |
|---|---|
| AV receiver L / C / R | Tribe Trio |
| Side and rear surround outputs | Four Tribe or Kin surround speakers |
| Subwoofer pre-out | Subwoofer |
Setup
- Mount the Trio under the screen.
- Place side surrounds beside the seats and rear surrounds behind the listening position, about 6 ft (183 cm) high.
- Connect every speaker with the equipment off.
- Calibrate levels and distances in the receiver.
Tip: Keep the receiver within its clean power: turn down at the first sign of distortion.
Workflow 6: Gaming and TV room
Gamers and TV viewers who want clear dialogue and wide effects.
Connections
| Connect | To |
|---|---|
| Console HDMI | AV receiver HDMI |
| AV receiver L / C / R outputs | Tribe Trio terminals |
Setup
- Mount or place the Trio under the screen.
- Connect the three channels with the equipment switched off.
- Play for 50 - 80 hours at moderate levels to break the bar in.
- Raise the volume gradually; with most content an amplifier reaches its maximum power between 11 and 1 o'clock on the dial.
Tip: Lack of bass or image usually means reversed polarity on one channel.








