




TOTEM ACOUSTIC Wind
PRICE ON ENQUIRY
Totem Acoustic Wind three-way floorstanding speaker: 8.5-inch woofer, two midranges, alloy dome tweeter, 24 Hz - 21 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Type | Three-way floorstanding loudspeaker, four drivers |
| Frequency response | 24 Hz - 21 kHz ± 3 dB (in room) |
| Sensitivity | 87 dB |
| Impedance | 4 Ω |
| Recommended amplifier power | 80 - 250 W |
| Crossover | Woofer to mids: 2nd order / 2nd order; mids to tweeter: 2nd order / 2nd order; hard-wired |
Drivers
| Woofer | 8.5 in (21.59 cm), cast frame, specially damped, high power handling, long throw |
| Mid-woofers (2) | 3 in (7.62 cm) voice coil, cast frame, high power handling, wrap-around neodymium magnet structure, accurate linear throw |
| Tweeter | 1 in (2.54 cm) alloy dome, flexible linear suspension, special low-resonance chamber |
Connections
| Speaker terminals | Bi-wireable, gold premium connectors |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Placement from rear wall | 3 - 7 ft (91.44 - 213.36 cm) |
| Placement distance apart | 6 - 14 ft (182.88 - 426.72 cm) |
| Break-in time | 200 - 250 hours |
Physical
| Dimensions (W × H × D) | 271.8 × 1125.2 × 355.6 mm (10.7 × 44.3 × 14 in), over maximum size |
| Weight | 34 kg (74.8 lb) |
| Decoupling | Totem Claws, solid aluminium, with silver metal ball bearings |
| Grille | Magnetic grille, optional |
| Made in | Canada |
Versions
| WIND-BLACK-VENEER | Black Veneer |
| WIND-MAHOGANY-VENEER | Mahogany Veneer |
| WIND-SATIN-WHITE | Satin White |
Product overview
The Totem Acoustic Wind is a large three-way floorstanding loudspeaker with four drivers: a specially damped 8.5-inch long-throw woofer, two midranges with 3-inch voice coils and a 1-inch alloy dome tweeter in its own low-resonance chamber, all in an avant-garde cabinet of complex geometry.
Since its introduction the Wind has been valued for its avant-garde design and its sonic architecture. The multiple midranges let a great amount of musical information move into the room with ease, and the sound level possibilities of this large, dynamic system make it suitable for big and complex musical material. Totem describes the result as flexible, truly full-range expression, with design and performance held in a manageable balance.
The 8.5-inch woofer has a cast frame, is specially damped, handles high power and has long-throw characteristics. The two mid-woofers also use cast frames, with 3-inch voice coils, a wrap-around neodymium magnet structure and an accurate linear throw. The 1-inch alloy dome tweeter has a flexible linear suspension and sits in a special low-resonance chamber. An extreme-quality hard-wired crossover joins them with second-order slopes from woofer to mids and from mids to tweeter.
The Wind images on and off axis as a point source. Like every Totem floorstanding speaker it builds a three-dimensional, accurate soundstage without needing any toe-in. Bi-wireable gold premium speaker terminals sit on the rear, and the speaker stands on Totem Claws, machined from solid aluminium, that break up surface standing waves and control resonances on any floor.
The Wind is made for larger rooms: Totem recommends 3 - 7 ft (91.44 - 213.36 cm) from the rear wall and 6 - 14 ft (182.88 - 426.72 cm) between the speakers, with 80 - 250 W of amplifier power. It is offered in Black Veneer, Mahogany Veneer and Satin White, and is also available as the Wind Design in a different finish.
| Frequency response (± 3 dB, in room) | 24 Hz - 21 kHz |
| Sensitivity | 87 dB |
| Recommended amplifier power | 80 - 250 W |
| Impedance | 4 Ω |
Key features
- Three-way system with four drivers: one woofer, two midranges and one tweeter
- 8.5-inch cast-frame woofer, specially damped, high power handling, long throw
- Two mid-woofers with 3-inch voice coils, cast frames and wrap-around neodymium magnet structures
- 1-inch alloy dome tweeter with flexible linear suspension in a special low-resonance chamber
- Extreme-quality hard-wired crossover, second order from woofer to mids and from mids to tweeter
- On- and off-axis point-source imaging
- Avant-garde cabinet with complex geometry
- Bi-wireable gold premium speaker terminals
- Totem Claws in solid aluminium with ball bearings for decoupling
- Frequency response 24 Hz - 21 kHz ± 3 dB in room, 4 Ω, sensitivity 87 dB
- Finishes: Black Veneer, Mahogany Veneer, Satin White; optional magnetic grille
- Made in Canada
Made for
- Stereo music listening in larger living rooms and dedicated listening rooms
- Large and complex musical material at high sound levels
- Front left and right channels of a home theatre
- Music, films, TV and video games
Placement and set-up
- 3 - 7 ft (91.44 - 213.36 cm) from the rear wall
- 6 - 14 ft (182.88 - 426.72 cm) apart
- No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other
- A popular guideline: listening distance about 1.5 times the spacing between the speakers
- Fit the Totem Claws to the pre-drilled holes in the base; use the ball bearings or not, depending on the floor surface
- Break-in: 200 - 250 hours of music, without very loud levels during that time
In the box
- Wind loudspeaker, with jumpers fitted on the terminals
- 2 Totem Claws in solid aluminium, with screws
- 2 silver metal ball bearings
Connections
- Bi-wireable gold premium speaker terminals (two sets), for single-wire, bi-wire or bi-amp connection
- The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
- Jumpers between the two sets of terminals for single-wire connection
Finishes
- Black Veneer
- Mahogany Veneer
- Satin White
Totem Acoustic Wind: frequently asked questions
Why does the Wind use two midranges?
Totem built the Wind as a unique four-driver three-way system. The two midranges, with 3-inch voice coils and wrap-around neodymium magnets, let a great deal of musical information move into the room with ease and support the high sound levels of this large, dynamic speaker.
What amplifier power does the Wind need?
Totem recommends 80 - 250 W into its 4 Ω impedance. More clean amplifier power is safer than an amplifier pushed into distortion, the most common cause of speaker damage: turn the volume down as soon as distortion starts, and use the speaker within its power range.
How much space does the Wind need?
Totem recommends 3 - 7 ft (91.44 - 213.36 cm) from the rear wall and 6 - 14 ft (182.88 - 426.72 cm) between the two speakers. No toe-in is needed for an accurate, three-dimensional soundstage.
Can the Wind be bi-wired or bi-amped?
Yes. The bi-wireable gold terminals come with jumpers fitted for a single cable; remove them to bi-wire or bi-amp. Make every connection with the equipment switched off and check the polarity, red to red and black to black.
Is a grille included?
The Wind specification sheet lists a magnetic grille as an option. It is not part of the standard contents.
Where can I buy the Totem Acoustic Wind in India?
The Totem Acoustic Wind is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo listening room
Music lovers with a dedicated listening room or a large living room for serious stereo.
Connections
| Connect | To |
|---|---|
| Streamer, CD player or turntable with phono stage | Integrated amplifier input |
| Integrated amplifier L / R speaker outputs (80 - 250 W recommended, 4 Ω capable) | Wind terminals, jumpers in place |
Setup
- Fit the two Totem Claws to the pre-drilled holes in the base of each Wind, protecting the finish with the packaging foam while the speaker lies on its top.
- Stand the speakers 3 - 7 ft (91.44 - 213.36 cm) from the rear wall and 6 - 14 ft (182.88 - 426.72 cm) apart.
- Sit about 1.5 times the speaker spacing away and point the speakers straight ahead: no toe-in is needed.
- With everything switched off, connect red to red and black to black, keeping the jumpers in place.
- Play music for 200 - 250 hours at moderate levels to break the speakers in.
Tip: Closer to the rear wall gives more bass but less soundstage depth: move the speakers in small steps within the recommended range.
Workflow 2: Bi-wired stereo system
Listeners who want to run separate cables to the woofer and to the mid / tweeter sections.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | Two runs of speaker cable per speaker |
| Cable runs | Upper and lower Wind terminals, jumpers removed |
Setup
- Switch the amplifier off before touching any cable.
- Remove the jumpers between the two sets of terminals on each Wind.
- Connect one cable to the upper terminals and one to the lower terminals, both from the same amplifier output, observing polarity.
- Use bare wire, pins, banana plugs or spade lugs of 8.1 - 9 mm (5/16 - 3/8 in).
- Switch on and check that both speakers play with full bass and a centred image.
Tip: Lack of bass or image usually means reversed polarity on one connection: check red and black on every terminal.
Workflow 3: Bi-amped system
System builders driving the Wind with two stereo power amplifiers.
Connections
| Connect | To |
|---|---|
| Preamplifier outputs | Two stereo power amplifiers |
| Amplifier 1 outputs | Lower Wind terminals |
| Amplifier 2 outputs | Upper Wind terminals |
Setup
- Check the amplifier manuals for bi-amp connection, then switch everything off.
- Remove the jumpers from the terminals of both speakers.
- Connect one amplifier to the lower terminals and the second to the upper terminals of each speaker, red to red and black to black.
- Set matching levels on both amplifiers and start at a low volume.
- Raise the volume gradually, staying within the 80 - 250 W recommended range.
Tip: Turn the volume down the moment distortion starts: clipping amplifiers are the most common cause of speaker damage.
Workflow 4: 5.1 home theatre in a large living room
Families who want the Wind as the front pair of a film and music system.
Connections
| Connect | To |
|---|---|
| TV or media player HDMI | AV receiver HDMI input |
| AV receiver front L / R speaker outputs | Wind terminals |
| AV receiver centre, surround and subwoofer outputs | Matching centre, surround speakers and subwoofer |
Setup
- Place the Wind pair as for stereo, 6 - 14 ft (182.88 - 426.72 cm) apart and 3 - 7 ft from the rear wall, either side of the screen.
- Centre a Totem centre channel on the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor, ideally equidistant from the Wind pair.
- Place the surrounds behind and beside the listening area at about 6 ft (183 cm) high.
- Place the subwoofer almost anywhere; closer to a corner gives more bass.
- Run the receiver's speaker set-up for the Wind as large front speakers with 4 Ω capable output.
Tip: Totem voices its centre channels to match specific main speakers: check the official pairing before choosing one.
Workflow 5: 7.1 dedicated cinema room
Home cinema owners building a room around a large, dynamic front pair.
Connections
| Connect | To |
|---|---|
| Media player HDMI | AV processor or receiver HDMI input |
| Front L / R outputs (via power amplifier if needed) | Wind terminals |
| Centre, side and rear surround outputs | Centre and four surround speakers |
Setup
- Place the Wind pair at the front with the recommended rear-wall distance and spacing.
- Set the centre channel on the screen axis, 20 - 30 in (50.8 - 76.2 cm) above the floor.
- Place the side surrounds beside and slightly behind the seats, about 6 ft (183 cm) high, and the rear surrounds behind the listening position.
- Connect every speaker with the equipment off and check polarity.
- Fine-tune the front speaker positions in small steps before calibrating levels.
Tip: Rooms with a variety of materials sound more harmonised than bare, hard rooms.
Workflow 6: Vinyl and music room
Record collectors who want a full-range floorstander for analogue listening.
Connections
| Connect | To |
|---|---|
| Turntable | Phono stage |
| Phono stage output | Integrated amplifier line input |
| Amplifier speaker outputs | Wind terminals |
Setup
- Keep the turntable away from the speakers on a stable surface.
- Fit the Totem Claws and decide whether to use the ball bearings on your floor surface.
- Position the speakers 3 - 7 ft from the rear wall and 6 - 14 ft apart, with no toe-in.
- Connect the amplifier to the Wind with jumpers in place.
- Listen at moderate levels during the 200 - 250 hour break-in.
Tip: Gradual experimentation with position is the key to finding the best image in your room.








