XVIVE H1 Transmitter Holder

Product overview

The XVIVE H1 Transmitter Holder attaches the transmitter of the XVIVE U2 Guitar Wireless System to a guitar strap, at a distance from the instrument's output jack.

The included 1/4 inch extension cable connects the U2 transmitter to the output of the guitar or bass, and the transmitter sits protected in the H1's leather holster instead of being exposed at the end of the instrument. In some cases active or piezo pickups can produce undesirable high-pitched noise with the U2 system; moving the transmitter further away from the guitar's electronics with the H1 eliminates this interference. Acoustic guitars whose pickup systems include an integrated microphone can also create problems for the U2 system, and the H1 fixes these too.

Secure on the strap

The top hook+loop flap loops through the strap's buckle to prevent slippage, two hook+loop straps hold the H1 secure against the guitar strap, and the extension cable goes through an opening at the lower end of the unit so the U2 never gets disconnected.

Compatible with

• XVIVE U2 Guitar Wireless System transmitter (all finishes)
• XVIVE U2T Transmitter

In the box

• H1 transmitter holder
• 1/4 inch extension cable

FAQs

Why would I need the H1?

If active or piezo pickups, or an acoustic pickup system with an integrated microphone, cause high-pitched noise with the U2, the H1 moves the transmitter away from the guitar's electronics and eliminates the interference.

Is the cable included?

Yes. A 1/4 inch extension cable that connects the U2 transmitter to the guitar's output is included.

Where can I buy the XVIVE H1 Transmitter Holder in India?

The XVIVE H1 Transmitter Holder is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stop pickup noise from active or piezo pickups

Players whose active or piezo pickups cause high-pitched noise with the U2.

Connections

Setup

1. Loop the top flap of the H1 through the strap buckle and close the two hook+loop straps.
2. Put the U2 transmitter in the holster.
3. Run the extension cable from the guitar output through the lower opening to the transmitter.

Tip: Distance from the guitar's electronics is what removes the interference.

Workflow 2: Acoustic guitar with an integrated microphone pickup

Acoustic players with mic-blend pickup systems.

Connections

Setup

1. Fit the H1 to the strap.
2. Connect the transmitter with the extension cable.
3. Switch on the U2 and match the channels.

Tip: The leather holster also protects the transmitter on stage.