XVIVE U35 Microphone Wireless System
MRP - Rs. 21,563
XVIVE U35 5.8 GHz True Diversity wireless for dynamic microphones: auto channel scan, 24-bit / 48 kHz, 5 ms, 30.5 m range, 5 hr batteries. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
System
| Wireless type | 5.8 GHz ISM worldwide open band |
| Tuning bandwidth | 5730 - 5844 MHz (Korea: 5729 - 5821 MHz) |
| Bit depth / sample rate | 24‑bit / 48 kHz |
| Switchable channels | 6 |
| Simultaneous channels | 6 |
| Mode | Input: Mic / Line |
| Frequency response | 20 Hz - 20 kHz (-3 dB) |
| Dynamic range | 110 dB (-3 dB) |
| Signal‑to‑noise ratio | 110 dB |
| Total harmonic distortion | 0.2 % |
| Latency | 5 ms |
| Operating range | 30.48 m / 100 ft (line of sight) |
| RF output power | 25 mW E.I.R.P. max |
| RF sensitivity | -88 dBm |
| Operating temperature | 0 °C to 45 °C |
| Microphone compatibility | Dynamic and battery‑powered condenser microphones |
Battery
| Type | Rechargeable lithium‑ion (internal), 3.7 V, 860 mA |
| Battery life | 5 hrs |
| Charging time | 2.5 hrs (full charge) |
| Charging voltage | 5 V (USB) |
| Usable while charging | Yes |
Transmitter (U35T)
| Connector | Balanced XLR (female) |
| Mode | Input: Mic / Line (-10 dB) |
| Input impedance | 220 kΩ (1 kHz) |
| Maximum input level | Mic mode 2.8 Vp‑p; Line mode 7 Vp‑p |
| Mute | Yes |
| Dimensions | 31 x 29 x 98 mm |
| Weight | 93 g |
Receiver (U35R)
| Connector | Balanced XLR (male) |
| Output impedance | 470 Ω (1 kHz) |
| Maximum output level | 2.8 Vp‑p |
| Dimensions | 81 x 31 x 29 mm |
| Weight | 92 g |
Product overview
The XVIVE U35 Microphone Wireless System is a 5.8 GHz True Diversity, plug-and-play wireless system that makes any dynamic microphone wireless, live, at home or in the studio.
The U35 broadcasts on the 5.8 GHz band, avoiding interference from common 2.4 GHz devices. The transmitter plugs onto the microphone; the receiver plugs into a mixer, sound interface, preamp, XLR cable or snake and scans automatically for the best of the 6 channels. Audio is 24-bit / 48 kHz with a 20 Hz - 20 kHz (-3 dB) frequency response, 110 dB signal-to-noise ratio, 0.2 % total harmonic distortion and 5 ms latency, with a range of up to 30.5 m (100 ft) in line of sight.
| True Diversity wireless | 5.8 GHz |
| Operating range (line of sight) | 30.5 m |
| Digital audio | 24‑bit / 48 kHz |
| Latency | 5 ms |
Key features
- 5.8 GHz True Diversity wireless system for dynamic microphones
- Automatic scanning for the best signal out of 6 channels
- 24-bit / 48 kHz audio with 20 Hz - 20 kHz frequency response and 110 dB dynamic range
- Range up to 30.5 m (100 ft) in line of sight
- Mic mode for dynamic microphones and Line mode for wireless audio from a mixer to a powered speaker
- Up to 6 U35 sets at the same time in one area
- Internal rechargeable batteries: up to 5 hours
- Charges both units together from the included dual-USB cable
The transmitter
The U35T transmitter has a balanced XLR (female) input with a circumferential grounding spring and a lock button that releases it from the XLR port. Its controls are an input mode switch (MIC = 0 dB, LINE = -10 dB), a power switch, a channel switch for channels 1-6 with a channel LED, a mute switch, a power status LED and a USB charging port. It measures 31 x 29 x 98 mm and weighs 93 g. Line mode attenuates the signal by 10 dB when an XLR output sends too much level.
The receiver
The U35R receiver has a balanced XLR (male) output, a power switch, a channel switch for channels 1-6 with a channel LED, an RF status LED (on = linked, flashing = signal interference, off = transmitter off or unlinked), a power status LED and a USB port for charging. Holding the channel button for 3 seconds starts the channel scan; the LED then stays on the best channel. It measures 81 x 31 x 29 mm and weighs 92 g.
Batteries and charging
Both units have internal rechargeable lithium-ion batteries that last up to 5 hours. The dual-USB cable charges them at the same time from any 5 V / 2 A USB charger or USB power source; a full charge takes about 2.5 hours and 30 minutes of charging gives about 1 hour of use.
Applications
Singers, rappers, harmonica players, public speakers, DJs, actors and auctioneers can move freely while performing. The receiver can go straight into the XLR input of a powered speaker, or into an XLR cable or snake so the transmitter only has to reach the front of the stage. In Line mode the U35 runs wirelessly from a PA mixing console to a powered main speaker or between powered mains or monitors. It also serves instrument and amplifier microphones, balanced XLR outputs of multi-effect processors or keyboards, and DSLR cameras through an adapter to the camera's (usually 3.5 mm) audio input.
In the box
- U35 transmitter
- U35 receiver
- USB cable
- Manual
- Bag
FAQs
Why does the XVIVE U35 use 5.8 GHz?
XVIVE states that broadcasting on the 5.8 GHz band avoids interference from common 2.4 GHz devices.
Does the U35 work with condenser microphones?
It works with XLR dynamic microphones and battery-powered condenser microphones. For condenser microphones that need 48 V or 12 V phantom power, XVIVE makes the U35C.
How does the channel scan work?
Hold the receiver's channel button for 3 seconds: the channel LED flashes while scanning and then stays on the best channel. Then set the transmitter to the same channel.
Where can I buy the XVIVE U35 Microphone Wireless System in India?
The XVIVE U35 Microphone Wireless System is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Wireless vocal microphone to the mixer
Singers and rappers on stage, at home or in the studio.
Connections
| Connect | To |
|---|---|
| Dynamic microphone XLR | U35 transmitter XLR IN |
| U35 receiver XLR OUT | Mixer microphone input |
Setup
- Plug the transmitter onto the microphone and the receiver into the mixer input.
- Hold the receiver's channel button for 3 seconds to scan for the best channel.
- Set the transmitter to the same channel and switch it on.
- Check the link: the receiver RF LED stays on once connected.
Tip: Switch the transmitter off before the scan.
Workflow 2: Speech straight into a powered speaker
Presenters, preachers, auctioneers and event hosts.
Connections
| Connect | To |
|---|---|
| Dynamic microphone XLR | U35 transmitter |
| U35 receiver XLR OUT | Powered speaker XLR input |
Setup
- Plug the receiver directly into the XLR input of the powered speaker.
- Plug the transmitter onto the microphone.
- Switch both on, select the same channel and set the speaker level.
Tip: No cable and no mixer are needed for a single microphone.
Workflow 3: Mixer to a powered speaker in Line mode
PA systems with powered main speakers or monitors.
Connections
| Connect | To |
|---|---|
| Mixer XLR output | U35 transmitter |
| U35 receiver | Powered speaker XLR input |
Setup
- Plug the transmitter into the mixer output and set it to LINE.
- Plug the receiver into the powered speaker.
- Switch on and match the channels.
Tip: For stereo and multiple mono PA systems XVIVE makes the U35D.
Workflow 4: Receiver at the front of the stage
Venues with a long run to the mixing position.
Connections
| Connect | To |
|---|---|
| U35 receiver XLR OUT | XLR cable or stage snake |
| Snake | Mixing console or monitor desk |
Setup
- Plug the receiver into a snake channel or XLR cable near the stage.
- Plug the transmitter onto the microphone.
- Switch on and select the same channel on both units.
Tip: The transmitter only has to reach the receiver, not the desk.
Workflow 5: Instrument microphones and line sources
Harmonica, violin, trumpet, saxophone and accordion players, guitar amplifiers, keyboards.
Connections
| Connect | To |
|---|---|
| Instrument microphone or balanced XLR output | U35 transmitter |
| U35 receiver | Mixer or interface input |
Setup
- Plug the transmitter onto the microphone or XLR output.
- Use MIC for microphones; switch to LINE if a line output distorts.
- Plug the receiver into the mixer and match the channels.
Tip: Line mode attenuates the signal by 10 dB.
Workflow 6: Several systems in one area
Bands and events with more than one wireless microphone.
Connections
| Connect | To |
|---|---|
| Each U35 transmitter | Its own U35 receiver on the same channel |
Setup
- Give each U35 pair its own channel, 1 to 6.
- Keep receivers more than 3 m from Wi-Fi transmitters such as routers.
- If there is interference, change channel or shorten the distance between transmitter and receiver.
Tip: Up to six U35 sets can be used at the same time in one area.
