ALLEN & HEATH DM64 product guide and data sheet cover
‹
ALLEN & HEATH DM64 product guide and data sheet coverALLEN & HEATH DM64 data sheet page 2: The heart of the dLive systemALLEN & HEATH DM64 data sheet page 3: Connections, expansion and controlALLEN & HEATH DM64 data sheet page 4: Specifications
›

Brand: ALLEN & HEATH

ALLEN & HEATH DM64

PRICE ON ENQUIRY

Category: Digital Mixing Consoles | Series: DLIVE

Allen & Heath dLive DM64 S Class MixRack: 64 mic/line inputs, 32 line outputs, 128 x 64 mix engine at 96 kHz, three I/O Ports; or DM64U with RackUltra FX. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

TypedLive S Class MixRack, rack-mountable mix engine capable of stand-alone operation, with or without a control surface
Processing coreXCVI 160x64 FPGA core
Sample rate96 kHz
Bit depthVariable bit depth for ultimate precision and noise performance
Mix headroomVirtually infinite, thanks to the 96-bit accumulator
Latency0.7 ms (MixRack XLR in to XLR out, input to mix); + 5 samples, Surface to MixRack (gigaACE hop); + 8 samples, DX32 to MixRack (DX hop)

Mixing capacity

Input channels128 with full processing, configurable mono / stereo
Mix outputs64 with full processing
Bus architectureConfigurable 64 bus (group, FX, aux, matrix, mains)
Mains modesLR, LCR and up to 5.1
MonitoringMultiple PFLs
FX16 RackExtra FX with dedicated stereo returns (DM64U: plus 8 RackUltra FX with dedicated stereo sends and returns)
DCAs24 (DM64U datasheet: 24 DCA/MCAs)
Automatic Mic Mixer (AMM)Up to 64 channels in 1, 2 or 4 zones; classic gain sharing or NOM (Number of Open Microphones)
System inputs and outputsOver 800, soft-patchable, all independently assigned
Scenes500, with Scene Safes, recall filters, Cue List, crossfade up to 20 s and embedded recall delayed up to 4 minutes
User accessPassword-protected log-in for several users with different access levels and permissions

Processing

Input channelTrim, polarity, high pass filter, low pass filter, two insert points, gate, parametric EQ, compressor, delay
Mix channelExternal input, trim, polarity, insert, parametric EQ, graphic EQ, compressor, delay
DEEP processingEmbedded emulations of classic compressors and GEQs, insertable on the fly without internal FX, external plug-ins or licences
Dyn864 engines, 4-band multiband compression and 4-band dynamic EQ
Direct outsGlobal tap-off point post preamp, HPF, gate, insert return, PEQ, compressor or delay; Follow Fader and Follow Mute options
AnalysisBuilt-in signal generator, RTA and spectrogram

Inputs

Mic/line XLR inputs64, balanced XLR, +48V phantom power
Mic/line preampFully recallable
Input sensitivity-60 to +15 dBu
Analogue gain+5 to +60 dB, 1 dB steps
Pad-20 dB Active PAD
Maximum input level+30 dBu (PAD in)
Input impedance>4 kΩ (Pad out), >10 kΩ (Pad in)
Mic EIN-127 dB with 150 Ω source
Phantom power indicationPer socket, internal or external phantom power sensing, triggered at 24 V

Outputs

Analogue XLR outputs32, balanced, relay protected
Output impedance<75 Ω
Nominal output+4 dBu = 0 dB meter reading
Maximum output level+22 dBu
Residual output noise-92 dBu (muted, 20 Hz - 20 kHz); -90 dBu (muted, 20 Hz - 40 kHz)

System performance

Measurement conditionsBalanced XLR in to XLR out, 20 Hz - 20 kHz, minimum gain, pad out, signal at 0 dB (meter)
Dynamic range110 dB
System signal to noise-92 dB
Frequency response20 Hz - 30 kHz, +0 / -0.8 dB
THD+N (analogue in to out)0.0015 % at +16 dBu output, 1 kHz, 0 dB gain
Headroom+18 dB
Internal operating level0 dBu
dBFS alignment+18 dBu = 0 dBFS (+22 dBu at XLR output)
Meter calibration0 dB meter = -18 dBFS (+4 dBu at XLR out)
Meter peak indication-3 dBFS (+19 dBu at XLR out)
Sampling rate96 kHz +/- 20 PPM
ADC24-bit Delta-Sigma
DAC24-bit Delta-Sigma

Connections and networking

gigaACEDual redundant gigabit link to the Surface on 2 locking RJ45 connectors; over 300 x 300 channels of uncompressed 96 kHz audio, control data and tunnelling of third-party Ethernet traffic
DX links2 redundant links on 4 locking RJ45 connectors, each up to 32 x 32 channels of uncompressed 96 kHz audio
I/O Ports3, 128 channels at 96 kHz each, for optional digital interface modules
ME portDedicated 48 kHz port for the ME personal mixing system, 40 channels with built-in sample rate conversion and channel naming
Network2 x RJ45 gigabit Ethernet for computers or other control systems
Word clockBNC input and output
HeadphonesHeadphone output
ExpansionUp to 28 DX I/O expanders via DX Hub modules or DX Link cards; up to 4 dLive Surfaces (1 via the integrated gigaACE socket, 3 via optional gigaACE cards)

Power

Mains voltage operating range100-240 V AC, 50/60 Hz
Power supplyModular, hot-swappable; earthed 3-pin IEC inlet and rocker switch; option for a second, interchangeable redundant power supply
Mains power consumption300 W max (MPS16 V1 300 W); 250 W max (MPS16 V2 250 W); consumption printed under the AC inlet

Physical

Operating temperature0 °C to 35 °C (32 °F to 95 °F) with MPS16 V1 300 W; 0 °C to 40 °C (32 °F to 104 °F) with MPS16 V2 250 W
Dimensions (W x D x H)482.6 x 313 x 458 mm (19" x 12.3" x 18")
Weight21 kg (46 lbs)
Boxed590 x 420 x 585 mm (23.2" x 16.5" x 23"), 24 kg (52.9 lbs)
ConstructionFlush front panel with ultra-quiet fan; reversible rack ears

Versions

DM64 (DM64 MixRack)16 RackExtra FX; the RackUltra FX card is available as an upgrade for the internal expansion slot
DM64U (DM64U MixRack with RackUltra FX)RackUltra FX card fitted: 8 RackUltra FX engines with dedicated stereo sends and returns, PEQ and dynamics, in addition to the 16 RackExtra FX; 21 kg (46.3 lbs), boxed 24 kg (52.9 lbs)

Product overview

The Allen & Heath dLive DM64 is the 64-input dLive S Class MixRack: the 96 kHz XCVI mix engine at the heart of a dLive system, with 64 mic/line inputs, 32 line outputs, three 128-channel I/O Ports and dual redundant links for professional touring, broadcast and permanent installations.

At the heart of every dLive system is the MixRack. The DM64 houses the XCVI processing core together with the audio I/O, control and audio networking ports, and runs 128 input channels and 64 mix outputs with full processing and a configurable 64-bus architecture (group, FX, aux, matrix and mains, with LR, LCR and up to 5.1 mains modes). The 96 kHz signal path uses variable bit depth throughout and a 96-bit accumulator for virtually infinite mix headroom, latency is 0.7 ms from analogue in to analogue out, and bus processing latency is compensated automatically so the mix outputs stay phase coherent.

The I/O panel carries 64 mic/line inputs on XLR, with an Allen & Heath preamp design optimised for transparency and clarity and the unique Active PAD circuit for consistent performance with any source, plus 32 balanced, relay-protected XLR line outputs. The parallel mixing engines of the XCVI core handle over 800 soft-patchable system inputs and outputs, fed through two redundant DX links for I/O expanders, three I/O Ports of 128 channels at 96 kHz for option cards and a dedicated port for the ME personal mixing system. Tie-lines patch any system input straight to any output for clean splits and feeds, with the MixRack handling sample rate and format conversion, without using input channels or processing.

The DM64 is capable of stand-alone operation, with or without a control surface. Up to four dLive Surfaces can be connected over gigaACE, one on the built-in dual redundant gigaACE ports and three on optional gigaACE cards; a single gigaACE cable carries over 300 x 300 channels of 96 kHz audio together with control data. Without a Surface, the system is run from dLive Director software on a computer, the MixPad app on a tablet or PoE compatible IP remote controllers, while performers can mix their own monitors with OneMix, 4You or the ME personal mixers.

As an S Class MixRack, the DM64 is designed for professional touring, broadcast and permanent installations, with dual power supply slots for redundancy, dual redundant audio connections, higher-grade metal on the sides and folded steel at key points for added rigidity. The power supply is modular and hot-swappable, the flush panel has an ultra-quiet fan, and the reversible rack ears let either face of the unit be presented on the front of a rack or flight case.

DEEP processing puts emulations of classic compressors and GEQs inside the input and mix channels with zero latency, and 64 Dyn8 engines add 4 bands of multiband compression and 4 bands of dynamic EQ to any combination of 64 input or mix channels. The DM64 MixRack has 16 RackExtra FX with dedicated stereo returns. The DM64U adds the RackUltra FX card, which combines FPGA and ARM processing for 8 more FX engines with dedicated stereo sends and returns, PEQ and dynamics, without using any of the 64 busses, channels, RackExtra FX slots or I/O Ports. Its collection includes Vocal Tuner, Vocal Gridder and Vocal Shifter, three Harmonisers, Spaces Reverb Designer, Plate Reverb Designer, Rhythm Delay, the Saturator and Amp+Cab Distortion.

Mic/line XLR inputs / XLR line outputs 64 / 32
Input channels / mix outputs at 96 kHz 128 / 64
Latency, analogue in to analogue out 0.7 ms
I/O Ports for option cards 3 x 128 ch

Key features

  • XCVI 160x64 FPGA core: 96 kHz sample rate, variable bit depth, 96-bit accumulator, 0.7 ms latency
  • 128 input channels and 64 mix outputs with full processing; configurable 64-bus architecture (group, FX, aux, matrix, mains), LR, LCR and up to 5.1 mains modes, multiple PFLs
  • 64 mic/line XLR inputs with fully recallable preamps, the new preamp design and the unique Active PAD circuit
  • 32 XLR line outputs, balanced and relay protected
  • DEEP processing: embedded compressor and GEQ models inside the channels, with zero latency
  • 64 Dyn8 engines: 4 bands of multiband compression and 4 bands of dynamic EQ
  • 16 RackExtra FX with dedicated stereo returns; the DM64U adds 8 RackUltra FX with dedicated stereo sends and returns
  • 24 DCAs and an Automatic Mic Mixer (AMM) for up to 64 channels in 1, 2 or 4 zones
  • Built-in signal generator, RTA and spectrogram
  • Connection hub: dual redundant gigaACE link to the Surface, 2 redundant DX links, 3 I/O Ports, ME port, 2 Network ports, Word Clock BNC in and out
  • Over 800 soft-patchable system inputs and outputs; tie-lines with automatic sample rate and format conversion
  • Dual redundant, hot-swappable power supply (second PSU optional), flush front panel with ultra-quiet fan, reversible rack ears

Made for

  • Professional touring, fly-dates, bus tours and support slots
  • Broadcast
  • Permanent and prestige installations
  • Houses of worship, theatres, conference centres, education facilities and visitor attractions
  • Multi-purpose venues, from background audio and boardroom tasks to full-scale live music and theatre shows
  • Front of house and monitor mixing from one system

In the box

  • dLive DM64 MixRack (DM64 or DM64U version)
  • Modular, hot-swappable power supply (one fitted as standard)
  • Reversible rack ears

Connections

  • Input 1-64: balanced XLR mic/line inputs with +48V phantom power and per-socket phantom indication
  • Out 1-32: balanced XLR line outputs, relay protected
  • I/O Port 1-3: slots for optional 128-channel, 96 kHz digital interface cards
  • gigaACE A and B: locking RJ45 connectors, dual redundant gigabit link to the dLive Surface
  • DX 1-4: locking RJ45 connectors, two dual redundant DX links, 32 x 32 channels at 96 kHz each
  • ME: locking RJ45 connector for the ME personal mixing system, 40 channels at 48 kHz
  • Network: 2 x RJ45 gigabit Ethernet for computers and control systems
  • Word Clock In and Out: BNC
  • Phones: headphone output with level control
  • Power 1 and Power 2: power supply slots, each with an earthed 3-pin IEC mains inlet and rocker switch

Allen & Heath DM64: frequently asked questions

What is the difference between the DM64 and the DM64U?

The DM64U is the DM64 MixRack fitted with the RackUltra FX card. The card adds 8 RackUltra FX engines with dedicated stereo sends and returns, PEQ and dynamics, in addition to the 16 RackExtra FX, without using any of the 64 busses, channels, RackExtra FX slots or I/O Ports. Inputs, outputs, connections, size and weight are the same.

Does the DM64 need a dLive Surface?

No. The DM64 is capable of stand-alone operation, with or without a control surface. It can be run from dLive Director software on a computer, the MixPad app on a tablet or IP remote controllers, and up to four dLive Surfaces can be connected: one via the built-in gigaACE ports and three via optional gigaACE cards.

How can I add more inputs and outputs?

The two redundant DX links each carry 32 x 32 channels at 96 kHz to DX I/O expanders, and an S Class MixRack can take up to 28 DX expanders via DX Hub modules or DX Link cards. The three I/O Ports, 128 channels at 96 kHz each, take option cards such as Dante, superMADI, AES3, gigaACE or fibreACE.

Is the power supply redundant?

One modular, hot-swappable power supply is fitted as standard, and a second, interchangeable power supply of the same type can be added for redundancy. The DM64 runs on 100-240 V AC, 50/60 Hz; maximum consumption is 300 W with the MPS16 V1 or 250 W with the MPS16 V2 supply, as printed under the AC inlet.

Can show files move between dLive systems?

Yes. Show files can be transferred between dLive systems without show file conversion or reconstruction, and dLive Director lets engineers configure the system offline before the show and check and edit show files from guest engineers.

Where can I buy the Allen & Heath DM64 in India?

The Allen & Heath DM64 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Touring FOH with a dLive Surface

Touring and rental engineers running a full dLive system with the MixRack at the stage.

Connections

ConnectTo
dLive Surface gigaACE portsDM64 gigaACE A and B, two touring-grade CAT5e cables up to 100 m
Stage sourcesDM64 Input 1-64
DM64 Out 1-32Mains, wedge and IEM feeds
DM64 DX 1-4DX expanders for more stage or FOH I/O

Setup

  1. Rack the DM64 at the stage; the reversible rack ears let either face sit at the front of the rack or flight case.
  2. Run two touring-grade CAT5e (or higher) cables of up to 100 m from the Surface to gigaACE A and B for a redundant link.
  3. Switch on the MixRack first, then the Surface; the gigaACE Lnk/Err indicators flash steadily once the link is established.
  4. Recall a Template Show in Utility / Show Manager as a starting point, then patch the inputs and outputs.
  5. Add DX expanders on the DX ports when the show needs more I/O.

Tip: With two gigaACE cables the system switches seamlessly if one fails, without any audio dropout.

Workflow 2: Front of house and monitors from one MixRack

Engineers sharing one DM64 between the FOH and monitor positions.

Connections

ConnectTo
FOH dLive SurfaceDM64 gigaACE A and B
Monitor dLive SurfacegigaACE card in an I/O Port
Tablet with the MixPad appDM64 Network port via a wireless router or access point

Setup

  1. Connect the FOH Surface to the built-in gigaACE ports.
  2. Fit a gigaACE card in an I/O Port and connect a second Surface at the monitor position (up to four Surfaces in total).
  3. Or mix the monitors from the MixPad app on a tablet while the FOH engineer works on the Surface, each with independent control.
  4. Configure the 64 busses as the auxes, groups, FX sends and matrices the show needs.

Tip: Several tablets can be connected, each providing independent control.

Workflow 3: Personal monitor mixing

Performers who mix their own monitors on stage.

Connections

ConnectTo
DM64 ME portME-1 or ME-500 personal mixers
DM64 Network portWireless access point for OneMix and 4You

Setup

  1. Connect the ME personal mixing system to the dedicated ME port: 40 channels at 48 kHz, with sample rate conversion and channel names built in.
  2. Assign each of the 16 keys of an ME-1 to a single source or group, such as the main vocal mic, a stereo pair or the whole drum kit.
  3. Set up OneMix on the performers' tablets as the Admin user, giving each musician as much or as little control as needed.
  4. Or let performers use the 4You app on their own smartphones or tablets.

Tip: Each OneMix user controls only their own monitor mix, without affecting the other monitors or the FOH mix.

Workflow 4: Installed venue with distributed I/O

Houses of worship, theatres, conference centres and education facilities.

Connections

ConnectTo
DM64 DX 1-4DX168 stageboxes and DX164-W wall boxes around the building
DM64 Network portNetwork switch with IP1, IP6 and IP8 remote controllers
I/O PortDante card for the venue audio network

Setup

  1. Install the DM64 in the equipment rack and patch its 64 local inputs and 32 outputs.
  2. Place DX expanders on the DX links, with up to 100 m of CAT cable to each.
  3. Give staff simple control: IP1 wallplates for source selection, level or preset recall, IP6 rotaries or IP8 faders, or the Custom Control app.
  4. Use the Automatic Mic Mixer for spoken-word sessions: up to 64 mics in 1, 2 or 4 zones, gain sharing or NOM.
  5. Set up user profiles with passwords and permissions to protect critical settings.

Tip: Third-party room control systems can join through the dLive TCP/IP protocol.

Workflow 5: Recording, broadcast feeds and Virtual Soundcheck

Engineers recording shows or sending feeds to broadcast.

Connections

ConnectTo
Network audio card in an I/O PortComputer running recording software
superMADI card in an I/O PortBroadcast or recording system on coaxial BNC or SFP fibre
Tie-linesInputs patched straight to card outputs

Setup

  1. Fit a network audio card in an I/O Port and patch the input channel direct outs to it.
  2. Choose the global direct out tap-off point: post preamp, HPF, gate, insert return, PEQ, compressor or delay.
  3. Record the show on a computer running recording software, then use Virtual Soundcheck to work on the mix with the recorded tracks.
  4. For broadcast, fit a superMADI card (128 channels, 48 or 96 kHz) and send the inputs over tie-lines without using input channels.

Tip: Tie-lines handle sample rate and format conversion automatically, for clean splits and feeds.

Workflow 6: Live vocal effects with the DM64U

Engineers mixing vocal-led shows on the DM64U.

Connections

ConnectTo
Lead vocal channelRackUltra FX insert: Vocal Tuner or Vocal Gridder
Dedicated stereo RackUltra FX sendQuad Voice Harmoniser or Spaces Reverb Designer
RackUltra FX returnMain and monitor mixes

Setup

  1. Insert Vocal Tuner for natural pitch correction, or Vocal Gridder for fast, snappy correction, on the lead vocal.
  2. Send backing vocals to the Quad Voice Harmoniser, which follows the global key, a local key or a MIDI input.
  3. Use the 8 dedicated stereo RackUltra FX sends and returns, which leave the 64 mix busses free.
  4. Shape each FX input and output with the built-in 4-band PEQ and dynamics, including ducking with sidechain.

Tip: RackUltra FX run in addition to the 16 RackExtra FX, as sends or inserts.

Request a Quote

ALLEN & HEATH DM64

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›